Mark this thread as Unsold
1995 240sx S14 w/ sr20det and lots of mods for $6000 obo!
#1
Thread Starter
Account Disabled
iTrader: (546)
Joined: May 2003
Posts: 3,876
Likes: 0
From: driving the 10 second beast in ohio or running lightmods.net
1995 240sx S14 w/ sr20det and lots of mods for $6000 obo!
SOLD!!!!!!!!!!!!!!!!
Modifications:
Rear Suspension:
Rear suspension and subframe bushings
Rear subframe spacers with spl pineapples no wheel hop at all
Battle version Rear upper control arms
Vlsd that still works great
Front suspension:
Tein inner tie rod with spacer
KTS outer tie rod
Spl v2 tension rods w s13 rods more caster adjustment
Megan racing coilovers rear and front. Just installed with the spl v2s
Newer sway bar bushings
Engine mods
Sr20det Redtop runs great...not positive on mileage but its not high
Greddy vspl front mount
Slick motorsports oil catch can
Heavy throttle hot pipe with hks bov
Apexi filter
Greddy turbo elbow
Turbo xs DP with cat delete
Apexi N1 dual exhaust
Exedy stage 3 clutch
Exedy lightweight flywheel
Walbro 255lph fuel pump
Hks ssq bov
ECU flashed I believe but not sure or by who...
Airbag light is on/flashing because of aftermarket wheel being on at one time
Needs power window switch and passenger side plastic sill at door jam (looking on ebay to get new switch/plastic),Leather seats and steering wheel are worn
Rusty in front drivers side parts to repair are $450 and total quoted $1250 professionally. I am negotiable on price of $6000 ....must go so make offer as I am really not positive what a good running car with these mods is worth. The chassis has around 188000 miles.
now on to the pics: keep in mind this car hasn't even been buffed out. There are tons of pics....here are the links and below you will find some of them
page 1: http://public.fotki.com/evodave/1995-240sx-s14-w-sr/
page 2: http://public.fotki.com/evodave/1995...-sr/page2.html
page 3: http://public.fotki.com/evodave/1995...-sr/page3.html
passenger side:
Modifications:
Rear Suspension:
Rear suspension and subframe bushings
Rear subframe spacers with spl pineapples no wheel hop at all
Battle version Rear upper control arms
Vlsd that still works great
Front suspension:
Tein inner tie rod with spacer
KTS outer tie rod
Spl v2 tension rods w s13 rods more caster adjustment
Megan racing coilovers rear and front. Just installed with the spl v2s
Newer sway bar bushings
Engine mods
Sr20det Redtop runs great...not positive on mileage but its not high
Greddy vspl front mount
Slick motorsports oil catch can
Heavy throttle hot pipe with hks bov
Apexi filter
Greddy turbo elbow
Turbo xs DP with cat delete
Apexi N1 dual exhaust
Exedy stage 3 clutch
Exedy lightweight flywheel
Walbro 255lph fuel pump
Hks ssq bov
ECU flashed I believe but not sure or by who...
Airbag light is on/flashing because of aftermarket wheel being on at one time
Needs power window switch and passenger side plastic sill at door jam (looking on ebay to get new switch/plastic),Leather seats and steering wheel are worn
Rusty in front drivers side parts to repair are $450 and total quoted $1250 professionally. I am negotiable on price of $6000 ....must go so make offer as I am really not positive what a good running car with these mods is worth. The chassis has around 188000 miles.
now on to the pics: keep in mind this car hasn't even been buffed out. There are tons of pics....here are the links and below you will find some of them
page 1: http://public.fotki.com/evodave/1995-240sx-s14-w-sr/
page 2: http://public.fotki.com/evodave/1995...-sr/page2.html
page 3: http://public.fotki.com/evodave/1995...-sr/page3.html
passenger side:
Last edited by evodave; Jan 5, 2007 at 10:55 AM.
#3
Thread Starter
Account Disabled
iTrader: (546)
Joined: May 2003
Posts: 3,876
Likes: 0
From: driving the 10 second beast in ohio or running lightmods.net
honestly it doesn't have a lot of issues i was just very very clear in all of them as i know a majority of 240sx's are rigged and have similar issues anyway+ worse hidden ones, plus i don't want people to think i am hiding anything.
of the issues most are easily resolved and would be with further modifications to the car
Airbag light and nasty steering wheel : $20 for the rewire setup they use for aftermarket wheels or $120+ for steering wheel/hub/wiring combo.
Power window switch is broke : Get new switch $20?
Leather front seats : upgrade to some type of racing seat or replace with stockers $150++ sky is the limit depending on what kind of aftermarket seats you get.
Rusty in front suspension area (on drivers side by frame rail) $1000 of the $1500 quoted to fix,parts are only around $450 . I would say this is the only actual expense and MOST 240s have rust anyway , just with this your gonna have it all resolved and no hidden issues later.
of the issues most are easily resolved and would be with further modifications to the car
Airbag light and nasty steering wheel : $20 for the rewire setup they use for aftermarket wheels or $120+ for steering wheel/hub/wiring combo.
Power window switch is broke : Get new switch $20?
Leather front seats : upgrade to some type of racing seat or replace with stockers $150++ sky is the limit depending on what kind of aftermarket seats you get.
Rusty in front suspension area (on drivers side by frame rail) $1000 of the $1500 quoted to fix,parts are only around $450 . I would say this is the only actual expense and MOST 240s have rust anyway , just with this your gonna have it all resolved and no hidden issues later.
Last edited by evodave; Dec 18, 2006 at 01:25 PM.
#7
Thread Starter
Account Disabled
iTrader: (546)
Joined: May 2003
Posts: 3,876
Likes: 0
From: driving the 10 second beast in ohio or running lightmods.net
well thanks for that....BTW Chad actually saw the car and drove it before in person so i guess i trust his judgement a bit. I know its not mint thats why i took detailed pics and was honest.
Dave
Dave
Trending Topics
#10
Thread Starter
Account Disabled
iTrader: (546)
Joined: May 2003
Posts: 3,876
Likes: 0
From: driving the 10 second beast in ohio or running lightmods.net
ttt.....fixed the oil pan , replaced it and sealed it up ..... stabilized the rust spot with new sheet metal in some areas and diamond plate.....and put in custom aluminum spacers with studs (1.25 inches) to bring wheels out.....looks sweet.
#13
Thread Starter
Account Disabled
iTrader: (546)
Joined: May 2003
Posts: 3,876
Likes: 0
From: driving the 10 second beast in ohio or running lightmods.net
ttt on ebay now http://cgi.ebay.com/ebaymotors/ws/eB...m=170062506906
Thread
Thread Starter
Forum
Replies
Last Post
evodave
For Sale - Part Outs
73
Apr 8, 2007 06:08 PM
evodave
For Sale - Cars For Sale
36
Jun 1, 2006 06:56 AM
evodave
For Sale - Cars For Sale
35
Jan 20, 2006 05:52 AM