Mark this thread as Unsold
MN: (Spun rod bearing) 2004 TB SSL 2.3 SC61 Shep Tranny, Tcase, Exedy Twin!!
Sep 23, 2008, 11:50 PM
#1
MN: (Spun rod bearing) 2004 TB SSL 2.3 SC61 Shep Tranny, Tcase, Exedy Twin!!
Just trying to see if there is any interest. It recently spun a rod bearing and oil is leaking from somewhere.
For serious buyers I will drop oil pan and take pictures. I haven't done it for myself but would be willing to.
Fyi: Oil Cooler hose poped off and the motor oil starved leading to a spun bearing.
Price: 18,000 firm. !! Before I return it back to stock.
2004 TB EVO 8 SSL
Mileage: Less than 30,000 need to charge small battery to check for sure
MODS:
Engine:
2.3 stroker Arias Pistons, Eagle rods and Eagle crank. Remember it spun a rod bearing so most or all of this is junk. This can still be used as a core or partial core depending on the crank.
Head:
HKS 280 cams
ARP headstuds
Intake/Exhuast:
Buschur Racing Deluex Intercooler with uicp and licp
Tial Bov
Small Battery kit with PC680 (Needs charge but less than 2k miles)
3" Buschur TBE (Downpipe, Hi flow cat, magnaflow muffler)
Turbo:
T3 DNP manifold
Turbosmart 38mm wastegate
Custom 02 housing to clear AC
PTE SC61 (61mm turbo, around the same size as a 35R just not ball bearing)
3in buschur intake pipe with adapter pipe for maf setups
comes with a filter with adapter plate on it.
Electronics:
Aem Ems 5 bar map, IAT sensor, boost solenoid (AEM controls boost) Running speed density.
Boost Guage in pod at the steering wheel.
Kenwood Dvd player (not sure what model, flip up screen).
Snow performance meth setup not hooked up to control unit but its setup; pump using the intercooler sprayer reservoir, nipple at uicp. I have the control unit or you can hook it up to the AEM.
Transmission:
All of this was done at the same time, has about 2000 miles on it.
Shepherd built transmission (Regular Build/Upgrade)
Shepherd Stage 3 Front Diff with Quaife LSD
Exedy Twin HD Kit
Buschur underhood bushing kit
Fuel System:
Walbro 255 Pump
1600cc injectors (previous owner ran E85 for a while)
I have some other misc parts (used oil cooler to replace the bad one, and other stock parts)
thanks
Car is in garge and can't be moved (steep driveway hard to push back), so pictures didn't turn out that great.
For serious buyers I will drop oil pan and take pictures. I haven't done it for myself but would be willing to.
Fyi: Oil Cooler hose poped off and the motor oil starved leading to a spun bearing.
Price: 18,000 firm. !! Before I return it back to stock.
2004 TB EVO 8 SSL
Mileage: Less than 30,000 need to charge small battery to check for sure
MODS:
Engine:
2.3 stroker Arias Pistons, Eagle rods and Eagle crank. Remember it spun a rod bearing so most or all of this is junk. This can still be used as a core or partial core depending on the crank.
Head:
HKS 280 cams
ARP headstuds
Intake/Exhuast:
Buschur Racing Deluex Intercooler with uicp and licp
Tial Bov
Small Battery kit with PC680 (Needs charge but less than 2k miles)
3" Buschur TBE (Downpipe, Hi flow cat, magnaflow muffler)
Turbo:
T3 DNP manifold
Turbosmart 38mm wastegate
Custom 02 housing to clear AC
PTE SC61 (61mm turbo, around the same size as a 35R just not ball bearing)
3in buschur intake pipe with adapter pipe for maf setups
comes with a filter with adapter plate on it.
Electronics:
Aem Ems 5 bar map, IAT sensor, boost solenoid (AEM controls boost) Running speed density.
Boost Guage in pod at the steering wheel.
Kenwood Dvd player (not sure what model, flip up screen).
Snow performance meth setup not hooked up to control unit but its setup; pump using the intercooler sprayer reservoir, nipple at uicp. I have the control unit or you can hook it up to the AEM.
Transmission:
All of this was done at the same time, has about 2000 miles on it.
Shepherd built transmission (Regular Build/Upgrade)
Shepherd Stage 3 Front Diff with Quaife LSD
Exedy Twin HD Kit
Buschur underhood bushing kit
Fuel System:
Walbro 255 Pump
1600cc injectors (previous owner ran E85 for a while)
I have some other misc parts (used oil cooler to replace the bad one, and other stock parts)
thanks
Car is in garge and can't be moved (steep driveway hard to push back), so pictures didn't turn out that great.
Last edited by omniprobe; Oct 12, 2008 at 11:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Braydo25
For Sale - Engine / Drivetrain / Power
3
Jul 6, 2010 02:20 AM
