Mark this thread as Unsold
FS: Evodaves silver evo 702awhp 21k original miles TONS of mods $32,000 obo
#1
Account Disabled
Thread Starter
iTrader: (546)
Join Date: May 2003
Location: driving the 10 second beast in ohio or running lightmods.net
Posts: 3,876
Likes: 0
Received 0 Likes
on
0 Posts
FS: Evodaves silver evo 702awhp 21k original miles TONS of mods $29,800 obo
and she's sold!!
OK guys first off i am going to be changing/updating this thread for a while so hang tight before ya get crazy with posts. The car is a silver evo 8 2003 year ....made 702 awhp with TONS of good useable power. Redlines at 10,200 rpms and i swear you could drive it everyday if you wanted to retune it .....its that nice. Most of the mods were preformed at slickmotorsports and he was very good at making the car 100% always or at Switzers performance innovation. I am open to partial trades depending .... make offers guys i don't want this amazing car sitting around anymore and i have way to many other projects/ cars
FYI the volks are sold seperately (i have most of the money for them) and i sold the front end and the canard setup so it runs the other stuff
I can change/swap parts or remove stuff on the car to get the price down if people need it cheaper. hit me back i am motivated to sell as you can see.
Engine mods:
custom 37r turbo kit v-band modded outlet
custom 3 inch exhaust v-band with $500 titanium muffler
custom 4 inch ETS intercooler with all short route piping (3" aluminum) with t-bolts a retaining assemble on the custom throttle body to keep the pipes from blowing off under high boost
AMS intake manifold
3 inch throttle body (upgraded seals so no leaks)
Switzer C.O.P. ignition system
1200cc injectors
aeromotive fuel pressure setup
AEM cam gears (all tuned by Tym Switzer )
aluminum fluidampr (rare)
Engine /internals:
Dual valve springs/retainers
1mm larger valves
pretty much stock head port wise (TONS of power left on the table)
Weisco custom coated pistons
Pauter HD rods (good for like 1400hp like the pistons)
fully balanced/blue printed motor and all perfect .....spins to 8k like most cars feel at 3,500 rpms.....car revs easily to 10,200+ and takes 40-45psi with ease....
Diffs:
Tcase has perfect ring gear (inspected and black lite checked) with brand new Quaife differential
rear end is in great shape
Trans /mods:
like new EVO 9 trans
new exedy triple disc HD clutch
http://www.vividracing.com/catalog/e...6-p-45120.html
all shifter bushings throughout and custom raised 3.5 inches shifter assembly\
Electronics:
AEM EMS w/5 bar map and ait
lots of gauges throughout
Braille battery (new) with custom mount kit /tray and cutoff
Suspension mods:
Stance coilovers gr+
AMS bushings
Brakes:
Ferodo pads (might have project mu shortly)
racing brake slotted rotors front and back
stainless lines
Body mods:
oem super light carbon fiber hood
Stock spoiler with lip added
cwest rear bumper slightly modded
cwest sides
VG
varis replica front fenders
modified/flared rolled rear quarters (can clear HUGE wheels/tires no problem)
custom lexan rear window with twin ducts for drivers side rear.....stock window is included
tinted windows
Wheels and tires:
i will include a set or two sets of rims/tires depending on what people want .... i can add/adjust prices accordingly
AS you can see Tym didn't even hit the gas early or anything....this car would have 650+awhp if held for prolly more then 5,000 rpms lol
http://public.fotki.com/evodave/new-evo-pics/
OLDER pics
Additionally you should know that this car wouldn't have been possible with out the following companies!
slickmotorsports
switzerperformanceinnovation
teamrip
gscmotorsports
Exedy clutch
lightmods.net
OK guys first off i am going to be changing/updating this thread for a while so hang tight before ya get crazy with posts. The car is a silver evo 8 2003 year ....made 702 awhp with TONS of good useable power. Redlines at 10,200 rpms and i swear you could drive it everyday if you wanted to retune it .....its that nice. Most of the mods were preformed at slickmotorsports and he was very good at making the car 100% always or at Switzers performance innovation. I am open to partial trades depending .... make offers guys i don't want this amazing car sitting around anymore and i have way to many other projects/ cars
FYI the volks are sold seperately (i have most of the money for them) and i sold the front end and the canard setup so it runs the other stuff
I can change/swap parts or remove stuff on the car to get the price down if people need it cheaper. hit me back i am motivated to sell as you can see.
Engine mods:
custom 37r turbo kit v-band modded outlet
custom 3 inch exhaust v-band with $500 titanium muffler
custom 4 inch ETS intercooler with all short route piping (3" aluminum) with t-bolts a retaining assemble on the custom throttle body to keep the pipes from blowing off under high boost
AMS intake manifold
3 inch throttle body (upgraded seals so no leaks)
Switzer C.O.P. ignition system
1200cc injectors
aeromotive fuel pressure setup
AEM cam gears (all tuned by Tym Switzer )
aluminum fluidampr (rare)
Engine /internals:
Dual valve springs/retainers
1mm larger valves
pretty much stock head port wise (TONS of power left on the table)
Weisco custom coated pistons
Pauter HD rods (good for like 1400hp like the pistons)
fully balanced/blue printed motor and all perfect .....spins to 8k like most cars feel at 3,500 rpms.....car revs easily to 10,200+ and takes 40-45psi with ease....
Diffs:
Tcase has perfect ring gear (inspected and black lite checked) with brand new Quaife differential
rear end is in great shape
Trans /mods:
like new EVO 9 trans
new exedy triple disc HD clutch
http://www.vividracing.com/catalog/e...6-p-45120.html
all shifter bushings throughout and custom raised 3.5 inches shifter assembly\
Electronics:
AEM EMS w/5 bar map and ait
lots of gauges throughout
Braille battery (new) with custom mount kit /tray and cutoff
Suspension mods:
Stance coilovers gr+
AMS bushings
Brakes:
Ferodo pads (might have project mu shortly)
racing brake slotted rotors front and back
stainless lines
Body mods:
oem super light carbon fiber hood
Stock spoiler with lip added
cwest rear bumper slightly modded
cwest sides
VG
varis replica front fenders
modified/flared rolled rear quarters (can clear HUGE wheels/tires no problem)
custom lexan rear window with twin ducts for drivers side rear.....stock window is included
tinted windows
Wheels and tires:
i will include a set or two sets of rims/tires depending on what people want .... i can add/adjust prices accordingly
AS you can see Tym didn't even hit the gas early or anything....this car would have 650+awhp if held for prolly more then 5,000 rpms lol
http://public.fotki.com/evodave/new-evo-pics/
OLDER pics
Additionally you should know that this car wouldn't have been possible with out the following companies!
slickmotorsports
switzerperformanceinnovation
teamrip
gscmotorsports
Exedy clutch
lightmods.net
Last edited by evodave; Oct 19, 2009 at 09:03 PM. Reason: lowered price!
Trending Topics
#15
Account Disabled
Thread Starter
iTrader: (546)
Join Date: May 2003
Location: driving the 10 second beast in ohio or running lightmods.net
Posts: 3,876
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the bump guys.....the motor is 3 years old and compression tests perfect.....its pretty much bullet proof. if anyone needs it tuned on pump gas and buys it i will arrange that.
Also, if people are interested in buying or partial trades just pm me thanks!
Also, if people are interested in buying or partial trades just pm me thanks!