DragNRacing

iTrader: (1)

EDIT: I've decided to keep the car and it is no longer for sale.

Car has less than 9,000 miles and has rarely seen rain (never snow).

2005 EVO 8 MR - (track use only - no title)
BR Stage 3 Head - (Seven autox events since being rebuilt)
BR Stage 3 2.0 Block - Compression 150 across
Bushwacker 5spdTransmission
Shep Stage 3 Transfer Case (New Ring/Pinion and Wavetrac LSD - Five autox events since new)
Cusco Center Diff
BR 3" Turboback Exhaust (HKS muffler - passes 100DB SCCA Solo Testing)
BR Mass Air Pipe and Filter
1200cc Injectors
BR Mini Battery Kit
BR Ported/Coated Stock Exhaust Manifold
BR Ported Intake Manifold
BR Upper IC Pipe w/ EVO 9 BOV (Have extra Upper/Lower IC Pipe w/Tial BOV)
BR Mini Radiator (custom AN fittings/Stainless Braided Hose)
Koyo Radiator (Not installed - I kept it so I can swap between that and the mini for road racing)
BR Manual Boost Controller
BR BF272 Cams
Exedy Triple Disk Metallic Clutch
BR Race FMIC
CBRD BBK Full - Ported (Seven autox events since new)
AEM EMS
Robispec / KW Race Coilover Suspension w/2 sets of springs
Perin PSRS Anti-Lift Kit (offset for extra castor)
APR Widebody Kit
Lexan Windows
ATL Fuel Cell with twin Walbro pumps
APR Carbon Fiber Mirrors
Robispec Carbon Fiber Hood
Robispec Carbon Fiber Trunk
OMP Race Seat
SCCA, NASA, NHRA approved roll cage
Whiteline Roll Center correction
Buschur Rear Diff Bushings
Buschur Diff Side Supports
Robispec Front Swaybar
Robispec Adjustable Rear Swaybar
5pt Harness with current certified belts
Removable Window Net
Custom 52mm restrictor plate for SCCA FP Solo class
Enkei Wheels w/Hoosier A6's mounted. Roughly 50% tread remaining. I also have a couple other sets of R6 tires that are roughly 40-50% tread.
ARP Wheel Studs
Stoptech 4 Piston Big Front Brake Kit - rotors/pads have seven Autox events - have a new set of EBC yellow pads as well
Stoptech rear brake rotors with Porterfield Pads - seven autox events
RBF 600 Brake Fluid
New RS Master Brake Cylinder and lines (ABS completely removed)
Stainless steel brake lines

The car is currently setup for the FP Solo class and weighs 2630lbs without driver. It is cross corner balanced for a 190lb driver. The only thing it currently needs is an alignment up front after I recently installed the Perin PSRS ALK kit.

The car has a conservative tune on Q16 @ 28 PSI.


Here are some pictures:

EmeryatSTM

iTrader: (79)

Awesome car! Good luck with the sale.


-Em

simons3z

iTrader: (12)

up for a local scclac

ChadB

iTrader: (45)

very nice..

bigturboevo8

iTrader: (5)

car is sick seen it at miller park a bunch...

DragNRacing

iTrader: (1)

Thanks for all the kind words guys.

I just updated the description as I had forgot the Cusco center diff. I also made a note that the car will only be up for sale until the end of this month. I have my heart set on a certain EVO X that will be gone after that time

LV///R

iTrader: (36)

Trevor,

Don't do it!

This is Brent from this past weekends autox. Goodluck with the sale!

DragNRacing

iTrader: (1)

I know, I feel like I have multiple personality disorder....I keep telling myself, yeah sell it...no don't....yeah do it....no you can't, LOL

Thanks for making the long drive to our event. It was a nice surprise seing three EVO's show up.

Now the bad news...err good news...seven more days up for sale and then it is no longer for sale!