SnowtaEvo

iTrader: (15)

FEELER, may sell my 2003 Evo 8 has 15,XXX original mile's on it I am the 2nd owner. Just finished my build / paintjob on the car and with my new family may be wiling to sell or trade? Looking at getting into a new Evo X possibly or something better for the family / kid's.
I initially wanted a 800hp Evo and sort of built it for that, but as time went on and the family grew, I sold off my Big turbo and some other parts to free up cash etc.

I purchased the evo 8 2 years ago from the original owner with 10k original miles on it. I was told / read on carfax the car was involved in a front left impact (rebuilt title), but was all repaired by a locall shop here in MN. When I recieved the car it was all fixed up and driving great. I put 5k miles on the car untill the snow started to hit here in MN. The car went into the garage and for the last 2 years I have been slowly saving and building the car to what it is today.
I have but about 400 miles on the car since build( still in break-in / break-in tune)
May have the car done / dyno tuned by the time of sale??



http://imageshack.us/a/img37/4852/imagendzf.jpg




*CAR STILL GOING INTO PAINT BOOTH IN A WEEK FOR FINAL SHOOT / TOUCH UP .. NEW MOLDING PIECES WILL GO ON AFTER
http://imageshack.us/a/img23/5855/imagebfoa.jpg

PARTS LIST:
MAP 2.3L Stroker: (brand new everything!) reciepts for all also from MAP
- Manley 100mm stroke Crankshaft
- Manley Turbo Tuff Pro series LW straight I-Beam connecting rod's
- Wiseco 1400HD Piston's 2.3l stroker ( 9:1 compression 85.5mm )
- ACL High Performance Main Bearing set
- ACL High Performance Thrust Washer set
- King XP series Rod Bearing's
- ARP Main Stud's
- Map's Balance Shaft Delete (stub shaft / block off cap)
- Gate's Racing Timing Belt ( Blue )
- OEM Mitsubishi Front Case
- OEM Mitsubishi Gasket Kit ( every gasket replaced with new )
- OEM Mitsubishi Timing Belt Tensioner Adjuster
- OEM Mitsubishi Timing Belt Tensioner Pulley
- OEM Mitsubishi Timing Belt Idler Pulley
- OEM Mitsubishi Water Pump Assembly
- OEM Mitsubishi Crank Sprocket and Bolt
- OEM Mitsubishi Crank Triger Plate
- OEM Mitsubishi Crank Position Sensor
- OEM Mitsubishi Oil Pressure Sensor
- OEM Mitsubishi Camshaft Position Sensor
- Fidanza Cam gears ( Blue for intake side / Red for exhaust side )


MAP Stage 3 Built Head: ( Everything brand new ) reciepts for all from MAP
- GSC S2 Camshaft's ( 274 / 274 )
- MAP +1mm SS Black Nitrided Valves
- Ferra Bronze Maganese / Copper Alloy Valve Guides
- Kiggly Beehive Valve Springs and Ti Retainers
- Supertech Valve Seals
- OEM Valve Locks ( new )
- MAP's High Performance 8740 Chromoly Head Stud's
- MAP's EGR Blockoff Plate
- NGK Spark Plug's
- STM Evo 8 Stainless Steel Valve Cover Bolt Kit
- OEM Evo 8 Half Moon Valve Cover Gasket
- OEM Evo 8 Camshaft Position Sensor
- OEM Valve Cover Gasket
- Proprietary MAP 5 Angle Radius Valve Job
- MAP Stage 3 Porting / Polishing
- Final Assembly by MAP
( ALL WORK PERFORMED AT MAP BY MAP TECH'S )
- OEM Valve Cover - Powder Coated Electric Blue done locally

MAP'S REV 2 Intake Manifold: (EVERYTHING BRAND NEW) reciepts to prove
- FULL PORT / POLISH Job Done by MAP
- MAP'S Full Port Job on Runner's
- MAP'S Full Port Job on Plenum
- MAP'S Full Black Ceramic Coating (control's heat soak)
- MAP'S EGR Block off Plate
- ALL new OEM gaskets
ALSO:
- Perrin Fuel Rail / With Fuel Pressure Gauge Attatched
- OEM Evo 8 Fuel Rail Spacer's
- OEM Return / Supply Lines / FPR
- Omni Power 4 Bar Map Sensor
- Fuel Injector Clinic 1150cc Injectors - High impedence.
- Resistor Bypass - Work Done at RS Motor's In MN

MAP Stage 2 Brake Kit: all brand new! ( brand new from map) reciepts to prove

- Rotor Pro's Performance Plus Brake Rotor's Sloted
- ATE Super Blue Racing/HP Brake Fluid
- Girodisc "Magic Pad's" Front / Rear Brake pads - recomended by MAP
- Techna-Fit Stainless Steel Brake Lines
- OEM Brembo Brake Caliper - 10k miles.. ( Coated Black Gloss with Larger Silver Brembo Logo's )
- Brembo Clips / Pins - brand new
- Brembo Brake Pad Bracket's - brand new

Suspension/Wheels
D2 coilovers 32 way adjustable etc..
Front strut tower brace
Rear strut tower brace

Enkie GTC-01 RACING WHEELS
-Toyo Proxe’s TR1 racing tires @ 285/35/18 all around !!!

Eterior / Interior :
Paint job: Aurora Blue Pearl ( 2013 nissan gtr color )
Full interior / exterior / door jams/ engine bay etc
- car was fully guted so it could be painted
- C-West body kit + Striker X front bumper optional (crack in front lip)
- OEM front bumper
- MR Vortex generator
- Tinted side marker’s
- Window's tinted all around
- oem bumpers / side skirts etc
- Seibon Carbon fiber hood ( oem style )
- Brand New Drip molding pieces
- 4 Brand new outside window molding pieces
- ALL Brand New clips to hold drip molding etc..
- MR Carbon Fiber E-brake Handle
- MR Pedals
- Headliner covered in black suede
- Carbon fiber timing belt cover
-Alpine type R 6.5" speakers
-Eonon 7" dvd flip out deck touch screen
-Mitsubishi MR oil temp gauge custom fit into cluster / oil temp oil plug sensor

-Carbon Fiber 3 gauge pod where oem radio goes
- AEM digital boost gauge
- AEM WIDEBAND o2 gauge
(also have black 2 gauge pod for drivers A pillar

AFTERMARKET:
(also have almost all oem parts etc.. bins full)

Innovative Motor Mounts ( red poly urethane street inserts )

Buschur Racing COP kit with cdi ignition box
Optima Red Top Battery

PWR 57MM radiator
-OEM fan and control unit
- Gates racing upper and new OEM radiator hose

Apexi N-1 Turbo Back Exhaust

Exedy Twin Disc HD
- Brand New Wave Ring / Retaining Spring
- Brand New Throw Out Bearing

INJEN upper intercooler pipe
INJEN Intake
Forge atmospheric bov ( all 4 springs included)
Perrin filter kit
Turbo XS front mount intercooler

Walbro 255 fuel pump in tank

Stock ecu
Also AEM v1 ecu

Stock Turbo set up
- stock manifold / o2 housing
- stock turbo set up
- ams replica front mount intercooler
- stock intercooler piping

RS MOTORS Work Done:
Axles installed
Brand new wheel bearings
Base tune just put on for break in
ALL new fluids diff / t-case / trans / coolant / power steering / amsoil engine break in oil etc.. OEM MITSUBISHI FLUIDS
Relay installed
High Impedence Fuel injector kit
Vaccum Cap Kit
- ALSO LOOK OVER EVERYTHING FOR LEAKS / GASKET SEAL'S / INSTALL ETC
NO LEAKS ETC FOUND ( BASIC OVERLOOK OF ALL COMPONENTS ON CAR FOR PROPER FUNCTION / TIMING/ SEATING ETC.. )

CONS:
Rebuilt MN title

Dash is not original/ has some scuffs/scrapes from when removed for build etc..
- can get a mint oem dash for around $200 shipped to your door

After installing the Walbro fuel pump my fuel gauge stopped working? not really sure what the issue is, as it worked fine before I installed the pump. May be easy fix?
Car has some minor scuffs inside on doors and trim pieces/ mainly from being moved around the garage the last year or so during the build etc..

think that's about it..

Looking to get $18k obo .. would like to trade for a evo x maybe somthing else?
can add cash on my end and vise versa.
I have put well over 20k into the car in parts / labor and such please don't be afraid to shoot me a message or offer worst I can say is no..
I can easily send pictures and videos driving / running or whatever you would like. i know i'm forgetting some parts..

chris the man

i have this

http://cosprings.craigslist.org/cto/3846501592.html