Mark this thread as Unsold
FS (OH): 2003 WW Built Evo with new engine/drivetrain
#1
Newbie
Thread Starter
iTrader: (5)
Join Date: Sep 2011
Location: Parma, Ohio
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
FS (OH): 2003 WW Built Evo with new engine/drivetrain
Most everything sold off, I would like to sell as a roller if anyone is interested. Negotiable.
ASKING PRICES (OBO):
-$8,000 Roller with clean title, complete interior, wiring, brakes, suspension, rear end, all body panels, etc. Very clean, not abused, beaten up, mismatched body panels, etc like many other rollers that pop up. drop in your motor,trans and go.
Looking to sell my 2003 WW Evo 8. It is currently under construction, however I would gladly sell it as it is. Having a potential buyer would likely give me more motivation to finish it sooner. If the car does not sell during its "construction" I will continue this for sale thread as a complete car with a price increase. Interested in potential trades plus cash!
Details on the car:
-89,000 on the chassis
-Brand new, 0 miles, not even in the car, built long block.
-Wiseco 10.5:1 compression 85.5mm pistons
-K1 Forged Rods (new 'beefier' version)
-Balanced crank, ACL bearings on mains and rods
-ARP Main studs
-A1 technologies H11 headstuds
-Fully ported head with new bronze valve guides installed
-Supertech Valves
-Kiggly Beehive springs/retainers
-BC 272 cams
-ARP Cam gear bolts
-Brand new Shearer Fab Forward Facing turbo kit
-Precision 6262 cea Turbo
-Tial 44mm V-band wastegate
-Tial QR BOV
-Buschur Racing Race intercooler
-Buschur Racing Upper intercooler pipe
-Brand new FIC 2150 Fuel injectors
-Buschur Double pumper
-Mini battery kit
-Buschur front center member
-Buschur mustache bar
-Apexi N1 exhaust with custom Aluminum cat delete/mid pipe
-AEM Boost and Wideband gauges
-Quartermaster 8 Leg Clutch (200 miles)
-Shep Ultimate ratio trans (200 miles)
-Shep transfer case (0 miles)
-Carbon Fiber trunk lid
-I have many of the stock parts that will be included with sale, including complete working AC system.
-other mix odds and ends that I'm probably forgetting.
The car currently needs minor things such as oil lines for the turbo, vacuum lines, and radiator lines to be assembled. I will continue working on it, however I will give a good deal to anyone who would like to purchase it as it stands. With the parts I have, I believe it has all the potential to make well over 600WHP and run 9.90's. For someone looking to build a bad *** street/strip car, but doesn't want something molested, this may be a great opportunity to buy a car and all the needed parts at a great value.
Please contact me with any questions. Flexible on price.
ASKING PRICES (OBO):
-$8,000 Roller with clean title, complete interior, wiring, brakes, suspension, rear end, all body panels, etc. Very clean, not abused, beaten up, mismatched body panels, etc like many other rollers that pop up. drop in your motor,trans and go.
Looking to sell my 2003 WW Evo 8. It is currently under construction, however I would gladly sell it as it is. Having a potential buyer would likely give me more motivation to finish it sooner. If the car does not sell during its "construction" I will continue this for sale thread as a complete car with a price increase. Interested in potential trades plus cash!
Details on the car:
-89,000 on the chassis
-Brand new, 0 miles, not even in the car, built long block.
-Wiseco 10.5:1 compression 85.5mm pistons
-K1 Forged Rods (new 'beefier' version)
-Balanced crank, ACL bearings on mains and rods
-ARP Main studs
-A1 technologies H11 headstuds
-Fully ported head with new bronze valve guides installed
-Supertech Valves
-Kiggly Beehive springs/retainers
-BC 272 cams
-ARP Cam gear bolts
-Brand new Shearer Fab Forward Facing turbo kit
-Precision 6262 cea Turbo
-Tial 44mm V-band wastegate
-Tial QR BOV
-Buschur Racing Race intercooler
-Buschur Racing Upper intercooler pipe
-Brand new FIC 2150 Fuel injectors
-Buschur Double pumper
-Mini battery kit
-Buschur front center member
-Buschur mustache bar
-Apexi N1 exhaust with custom Aluminum cat delete/mid pipe
-AEM Boost and Wideband gauges
-Quartermaster 8 Leg Clutch (200 miles)
-Shep Ultimate ratio trans (200 miles)
-Shep transfer case (0 miles)
-Carbon Fiber trunk lid
-I have many of the stock parts that will be included with sale, including complete working AC system.
-other mix odds and ends that I'm probably forgetting.
The car currently needs minor things such as oil lines for the turbo, vacuum lines, and radiator lines to be assembled. I will continue working on it, however I will give a good deal to anyone who would like to purchase it as it stands. With the parts I have, I believe it has all the potential to make well over 600WHP and run 9.90's. For someone looking to build a bad *** street/strip car, but doesn't want something molested, this may be a great opportunity to buy a car and all the needed parts at a great value.
Please contact me with any questions. Flexible on price.
Last edited by maradits; Oct 5, 2013 at 05:45 AM.
Trending Topics
#9
Evolved Member
iTrader: (64)
"construction"? Does the car have a motor in it currently and this is an extra you were building?
Who did the assembly of the bottom end/head?
Do you have all the receipts for the work?
shoot me a pm im interested
Who did the assembly of the bottom end/head?
Do you have all the receipts for the work?
shoot me a pm im interested
Last edited by 4g63smokinall4s; Jun 24, 2013 at 04:42 PM.
#12
Newbie
Thread Starter
iTrader: (5)
Join Date: Sep 2011
Location: Parma, Ohio
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
decided to assemble without the forward facing components in order to sell easier. selling some of the other aftermarket stuff as well. please check out my for sale post for more info on things i'm parting with
https://www.evolutionm.net/forums/sa...l#post10874572
https://www.evolutionm.net/forums/sa...l#post10874572