Notices
For Sale - Cars For Sale Includes all models. If you have a vehicle for sale, place it in here.
Mark this thread as Unsold

FS[MidWest]: FS:IA: AS Evo 8 ER 2.4 LR/ Fpblack D.D.

Thread Tools
 
Search this Thread
 
Old Nov 11, 2014 | 09:00 PM
  #1  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
Sold: New Jersey: Built Evo 8 English Racing 2.4 LR/ FP Black D.D.

Sold


2003 AS Evolution VIII
just over 100k on the body:vin#ja3ah86f53u123120- title in hand
Car is now located in New Jersey... and willing to ship if buyer deals and pays for it.
92 oct. pump tune(though I run 93 oct): 25 psi. I think 425whp
E85 conservative tune: 31 psi.-- about 550/550 will post copy of dyno sheet from English Racing-- recently had it checked over at Boostin Performance, in preparation for the sale-- hadn't put it on dyno since adding 02 dump- so I'll post that graph too..

I bought the car with 82k on the body and most parts less than 1500 miles... bought it off evom in broken condition with broken input shaft in the tranny- had it shipped and put back in order at English Racing- switched to Speed Density tunes by Aaron, New upgraded input shaft, added some gauges, relocated radio, replaced the quaife with stock diff. - and its been awesome ever since-put some tires on it and moved ...(6k of the miles I have put on this car just freeway driving in 1-2 weeks time between Oregon, California, New Jersey, and moving to Iowa City for graduate school)

Engine: Brad Penn Oil along with new plugs every 3k or less
English Racing Long Rod 2.4
· Wiseco 1400 HD 9:1 Pistons
· Manley I Beam Rods
· Eagle 100mm Crank
Built Head:- bought from cdupont03 and 0-ringed by English Racing
· 1mm oversized Supertech valves
· Supertech dual valvesprings
· Kiggly HLA
· Kelford 280 Cams
· ARP L19 Studs
Magnus V5 Cast Intake Manifold
Boomba Throttle Body
Buschur Racing Fuel Rail- with gauge
FIC 1450CC Injectors
ETS 4” Intercooler – 3” Piping
Speed Density Intake with large K&N Filter
FP Black – Ported and Coated 25 psi Wastegate
Buschur Ported stock exhaust manifold
JMF 02 Dump
Tanabe TB exhaust
SparkTech Non-cdi COP
Zaklee cover


Walbro 255 In-tank with Walbro Inline Pump

OEM 5 Speed trans.-(about 5K on it- and have the extra trans. sitting in my bedroom upgraded input shaft and new 4th gear, and 2-5 synchros-- little critter made a nest in the t.o.b. so I missed a shift into 4th and bought an extra tranny to install while waiting for that one to get freshened up- replaced clutch disks and t.o.b while I was at it.)
Shep Stage III Transfercase- brand new ring and pinion at purchase (stock diff.)
Exedy HD Triple Disk Clutch
AMS Shifter Bushings
Aftermarket Oil Cooler

BR Spec JIC Magic Coilovers- just replaced the rears
17x8 Kosei K1 TS's with Bridgestone Re-11s
Stock Enkei’s with near new Blizzack LM-22’s


I will sell for $25k, if that means a quick sale: and include extra wheels, tires, and fresh extra 5spd. transmission(so maybe sell for $22-23k by itself) -- looking for funds to relocate and start titanium frame building company in New Jersey and need funds to buy equipment.
Cheers again,
Jim

pics. on photobucket
[IMG][/IMG]
[IMG][/IMG]

http://s857.photobucket.com/user/jim...w/My%20Evo%208
[IMG]
[IMG][/IMG]
[/IMG]had boost checked and turned down for pump gas-- after being on e85
[IMG]
English Racing Pump Gas tuned for 92 oct.- just to be safe,but I run 93 oct.
[IMG][/IMG]
E85 tune by Aaron at English Racing
[IMG][/IMG]
update: I use it as my daily driver (so highway miles will go up) I consider build to still be very fresh-- as it is all mostly highway miles. I have also replaced wheel bearings, clutch master, slave cylinder, turbo and radiator hoses, stainless clutch and brake lines... those little things that end up needing attention... are already done : ) I am relocating to New Jersey-- and hoping to be there by Thanksgiving-- so if car doesn't sell locally (I have a friend that is very interested-- and knows the car in person)... it will then be for sale in Guttenberg, N.J.... in the not too distant future...and I could deliver between here and there...Cheers again, Jim
Attached Thumbnails FS:IA: AS Evo 8 ER 2.4 LR/ Fpblack D.D.-evo8driverside_zpse330918c.jpg   FS:IA: AS Evo 8 ER 2.4 LR/ Fpblack D.D.-evo8dashvin_zpsd77c939f.jpg   FS:IA: AS Evo 8 ER 2.4 LR/ Fpblack D.D.-boostinperformancecheckup_zps9cfbc7ff.jpg  

Last edited by jimountain; Mar 28, 2015 at 09:40 AM. Reason: Sold
Old Nov 12, 2014 | 12:38 PM
  #2  
Boostin Perform's Avatar
Former Sponsor
iTrader: (7)
 
Joined: Jan 2011
Posts: 1,367
Likes: 16
From: 2116 Stonington Ave Hoffman Estates IL 60169
Very clean car, GLWS!
Old Nov 12, 2014 | 04:10 PM
  #3  
kyoo's Avatar
Evolved Member
iTrader: (29)
 
Joined: May 2006
Posts: 10,655
Likes: 245
From: US
FS posts on EVOM MUST INCLUDE:
PICTURE OF THE ITEM WITH A SIGN CONTAINING THE DATE AND YOUR EVOM USERNAME.
Price
Accurate description of item and its current condition.
Location of seller & Willingness to ship.
If applicable VIN number - Transmissions, Shortblocks, body parts which have VIN numbers on them. A picture of your username/date next to the visible VIN number is required. VIN should also be in the FS post in plain text.
Old Nov 12, 2014 | 05:58 PM
  #4  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
added username beside vin, thank you
Old Nov 16, 2014 | 05:58 PM
  #5  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
cheers to all wheel drive in the winter : )
Old Nov 19, 2014 | 04:33 AM
  #6  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
This has a freshly built Head- 0-ringed by English Racing
and Fresh tranny... I was not planning on selling this car any time soon...

but really need money to get my business going...

Just found a guy with a media blast cabinet, lathe, Bridgeport Mill- (with tooling), some work benches, and other assorted goodies- that I could buy and start setting up shop- I'm motivated to sell...need some cash to get my bike business going... I'm into this car for 33k right now-- so I thought selling for 22 or 23k was a pretty good deal with low miles on the rest of the build--from previous owner... I have never taken this to the track, I don't beat on it-- very short little runs on the highway is all I've done... I believe in preventative maintenance and am the type of guy that will fix something; before it needs fixing : )
Cheers again
Old Nov 24, 2014 | 02:33 AM
  #7  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
Possible Local Sale tomorrow... to a local buddy who knows the car... depending on how long it takes him to get a loan : ) --otherwise I'm driving it to New Jersey... -- if it sells tomorrow I will go ahead and fly out; and return in January and pick up my stuff...my "extra" freshly rebuild 5 spd. will be up for grabs and can deliver between Iowa and New Jersey... probably driving that way after 2nd week in January... Cheers again, Jim
Old Dec 17, 2014 | 03:14 AM
  #8  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
Had a deposit...buyer backed out-- just flew back to Iowa to pick it up and finishing up some bike stuff- while I'm there

Will Drop Price to $21k if I can sell in the next week... before completing the move...to New Jersey
also have an extra freshly rebuild transmission (with upgraded input shaft from English Racing) new gears and synchros from Jacks Transmissions- zero miles on rebuild ($2k extra)-- this is being put on a pallet with the rest of my stuff for New Jersey...and will hold onto it until car sells...
Cheers for now,
Jim
again . . . only selling to raise funds for custom titanium fabrication business-- if I can figure out funds another way I will be keeping my car!
Old Dec 27, 2014 | 09:55 PM
  #9  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
Car is now up for grabs in New Jersey, 07093
Old Jan 2, 2015 | 01:40 PM
  #10  
NickieBlaine's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jul 2009
Posts: 505
Likes: 0
From: INDIANA
Good luck with sale! My old car?
Old Jan 2, 2015 | 02:43 PM
  #11  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
yes

Yes, it is : )
-- still up for grabs, surprised no one has bought this already-- the price is right with fresh head, fresh transmission, fresh shocks, new battery, new slave cylinder and braided clutch line, newer clutch disks-- all checked over by Boostin Performance : )
-ready to go...
Old Jan 23, 2015 | 11:48 AM
  #12  
06MREvo's Avatar
Evolved Member
iTrader: (90)
 
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
Titanium frame building company, interesting. GLWS & your future business sir!
Old Jan 26, 2015 | 07:27 PM
  #13  
jimountain's Avatar
Thread Starter
Newbie
iTrader: (5)
 
Joined: May 2009
Posts: 27
Likes: 0
From: Portland Oregon
Thanks : )
Old Apr 22, 2015 | 07:32 AM
  #14  
NickieBlaine's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jul 2009
Posts: 505
Likes: 0
From: INDIANA
... nvm saw sold at top.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bnr34rb26dett
Evo General
8
May 11, 2011 02:41 PM
NickieBlaine
For Sale - Cars For Sale
3
Oct 27, 2010 12:58 PM
iTune
Evo Show / Shine
29
Oct 23, 2010 02:47 PM
suprafabs
For Sale/WTB - Engine / Drivetrain / Power
5
May 27, 2010 01:04 PM




All times are GMT -7. The time now is 02:41 PM.