Mark this thread as Unsold
FS: Evo crankshaft
#1
FS: Evo crankshaft
SOLD SOLD SOLD
I have a stock 2.0 Evolution crankshaft for sale.
It has been
-- magnaflux checked for cracks
-- measured and confirmed for stock journals size
-- fully cleaned
-- micropolished rod and main journals
-- all oil galleys drilled and tapped (factory ball bearings removed, drilled out larger size and tapped, oil passages fully cleaned, and tapped plugs installed). This insures that there is no debris in the oil passages, and permits easy cleaning if your engine is disassembled in the future).
Machine work cost was $200, and was all done by Mile High Crankshafts in Denver, Colorado.
The crank is in excellent condition, and you can be sure that it will drop in with stock bearings, because it was measured to do so.
SOLD .
Thanks for reading.
I have a stock 2.0 Evolution crankshaft for sale.
It has been
-- magnaflux checked for cracks
-- measured and confirmed for stock journals size
-- fully cleaned
-- micropolished rod and main journals
-- all oil galleys drilled and tapped (factory ball bearings removed, drilled out larger size and tapped, oil passages fully cleaned, and tapped plugs installed). This insures that there is no debris in the oil passages, and permits easy cleaning if your engine is disassembled in the future).
Machine work cost was $200, and was all done by Mile High Crankshafts in Denver, Colorado.
The crank is in excellent condition, and you can be sure that it will drop in with stock bearings, because it was measured to do so.
SOLD .
Thanks for reading.
Last edited by CO_VR4; May 28, 2010 at 05:45 PM.
Trending Topics
#12
Evolving Member
yeah i feel ya but i sold my block and crank still in it for 500 LOL oh well its what i needed at the time.
another bump to you sir.