Mark this thread as Unsold
Bunch of performance parts and such
#1
Newbie
Thread Starter
iTrader: (19)
Join Date: Jan 2004
Location: Seattle, WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Bunch of performance parts and such
Okay folks, time has come to let go of my parts to pursue for another car. Everything has very low miles of use. All in very good condition. Prices are post and will work out deal with multiple parts purchase. Parts are going to come up for the next two weeks. You are more than welcome to place a deposit on a part and when it comes out, it will be yours. I will also make a waiting list if there is no deposit. Everything has to go. Here is the list:
Buschur Deluxe intercooler with upper intercooler pipe with HKS SSQV BOV already mounted: $850 shipped. Remember, that includes the HKS BOV with recric kit.
ATP 3071R Full turbo kit with SS auto chrome header. Great condition. Header already comes with a welded bung for EGT and down pipe already comes with welded bung for wideband o2. Comes with everything to install including lower spacers for tie bars: $1550 shipped
Stainless steel test pipe: $35 shipped
5Zigen Miracle full stainless steel cat back. Comes with silencer. $400 shipped and you will get a free test pipe with purchase along with the o2 spacer so no codes will be set.
Perrin full intake kit along with red intake hose: $60 shipped
Agency GOLD fuel rail along with Auto meter fuel pressure gauge: $120 shipped
Greddy/Denso 720cc injectors: $350 shipped. Less than 1000 miles
TurboXS Utec. Comes with Tuner(wideband setup), new o2 sensor that was just replaced, map sensor for boost logging and boost load setup, map switch for switching maps on the fly. $850 shipped. Originally over $1500 with everything!
HKS turbo type II? timer with harness: $65 shipped
Greddy Profec II with digital display boost controller (black): $250 shipped
Greddy oil catch can: $50 shipped.
HKS 280 cams: $450 shipped
Samco Red radiator hoses, brand new: $70 shipped
Project Mu 2-piece rotors along with brand new Zeal slotted rear rotors: $650 shipped. Fronts used very little and rears are brand spanking new! Will throw in brand new Project Mu NS brake pads both front and rear for a extra $100.
Tilton Clutch Cerametallic twin plate. If I am able to uninstall in time, $950 shipped. Less than 2000 miles and can be rebuilt for under $300. Comes with everything to install.
RS rear trunk bar: $30 shipped.
Apexi EL series 60mm EGT guage with fast reacting probe: $100 shipped
Apexi EL series 60mm Boost guage (reads in psi) $80 shipped
Stock carbon fiber spoiler in black, just refinished clear coat: $250 shipped.
Carbon fiber hood: $200 if local pickup in Seattle.
Paypal will be fine and I will split the 3% fee with the buyer.
Let me know!
Thanks!
Alfred
Buschur Deluxe intercooler with upper intercooler pipe with HKS SSQV BOV already mounted: $850 shipped. Remember, that includes the HKS BOV with recric kit.
ATP 3071R Full turbo kit with SS auto chrome header. Great condition. Header already comes with a welded bung for EGT and down pipe already comes with welded bung for wideband o2. Comes with everything to install including lower spacers for tie bars: $1550 shipped
Stainless steel test pipe: $35 shipped
5Zigen Miracle full stainless steel cat back. Comes with silencer. $400 shipped and you will get a free test pipe with purchase along with the o2 spacer so no codes will be set.
Perrin full intake kit along with red intake hose: $60 shipped
Agency GOLD fuel rail along with Auto meter fuel pressure gauge: $120 shipped
Greddy/Denso 720cc injectors: $350 shipped. Less than 1000 miles
TurboXS Utec. Comes with Tuner(wideband setup), new o2 sensor that was just replaced, map sensor for boost logging and boost load setup, map switch for switching maps on the fly. $850 shipped. Originally over $1500 with everything!
HKS turbo type II? timer with harness: $65 shipped
Greddy Profec II with digital display boost controller (black): $250 shipped
Greddy oil catch can: $50 shipped.
HKS 280 cams: $450 shipped
Samco Red radiator hoses, brand new: $70 shipped
Project Mu 2-piece rotors along with brand new Zeal slotted rear rotors: $650 shipped. Fronts used very little and rears are brand spanking new! Will throw in brand new Project Mu NS brake pads both front and rear for a extra $100.
Tilton Clutch Cerametallic twin plate. If I am able to uninstall in time, $950 shipped. Less than 2000 miles and can be rebuilt for under $300. Comes with everything to install.
RS rear trunk bar: $30 shipped.
Apexi EL series 60mm EGT guage with fast reacting probe: $100 shipped
Apexi EL series 60mm Boost guage (reads in psi) $80 shipped
Stock carbon fiber spoiler in black, just refinished clear coat: $250 shipped.
Carbon fiber hood: $200 if local pickup in Seattle.
Paypal will be fine and I will split the 3% fee with the buyer.
Let me know!
Thanks!
Alfred
Last edited by ICE888; Apr 27, 2006 at 05:39 PM.
#2
Evolved Member
iTrader: (79)
1...Project Mu 2-piece rotors along with brand new Zeal slotted rear rotors: $650 shipped. Fronts used very little and rears are brand spanking new! Will throw in brand new Project Mu NS brake pads both front and rear for a extra $100.
2...Agency GOLD fuel rail along with Auto meter fuel pressure gauge: $120 shipped
Im interested in these...can you send pics?
PM sent
2...Agency GOLD fuel rail along with Auto meter fuel pressure gauge: $120 shipped
Im interested in these...can you send pics?
PM sent
Trending Topics
#8
Newbie
Thread Starter
iTrader: (19)
Join Date: Jan 2004
Location: Seattle, WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by value
Are your cams new or used. If used how many miles. Hood maker ??? Apexi gauges EL I or II ?? Face color ??
Mike
Mike
Cams are used. 5k miles at most. Guages are ELI
Thanks
Alfred
#9
Newbie
Thread Starter
iTrader: (19)
Join Date: Jan 2004
Location: Seattle, WA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ammelk
Does the Perring Intake come with the filter? and How many miles? condition etc..
Yes! It comes with filter as a full kit. Probably 5000 miles? Very little use.
Thanks
Alfred
#12
Evolved Member
iTrader: (7)
Join Date: Feb 2005
Location: Atlanta, Ga
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lexat20
any chance of selling the fmic without the upper pipe?