Mark this thread as Unsold
EVO 8/9 Part-Out! Stock and aftermarket parts!
#1
Newbie
Thread Starter
iTrader: (11)
Join Date: Jun 2009
Location: Utah
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
EVO 8/9 Part-Out! Stock and aftermarket parts!
Continually updating parts and prices. Lots of parts for Evo 8 & 9. Always adding and deleting inventory! Check back often to see what we have available!
RC Engineering 1600cc injectors- only used for about 5 hours - $350 shipped ($550 new)
4 Hoosier HWet 245/35/18 Rain Slicks- Brand new never mounted $950 shipped
-all have manufacture dates of 0408
Stock Evo 8 sway bar- $100 shipped
4 Yokohama Advan A048 285/30/18- used 4 sessions- lots of life left! - $500 shipped
-these slicks last alot longer compared to a Hoosier R6. We ran them for 4 sessions and they could probably run for 2 more days at the track. Still tons of life left!
Evo 8 rear crash beam- $105 shipped
Evo 8 rear bumper- hole trimmed for tow hook- holes drilled for APR rear diffuser $100 + freight
5Zigen FN01R-C 18x9.5 +35 wheels only- used for 2 race seasons- cosmetically a little banged up, but fine structurally- $600 shipped
Evo 8 ignition switch w/key- $75 shipped
Evo 9 Intake Manifold Regulator- $40 shipped
Evo 8 Trunk/Deck- $150 + shipping
Evo 9 OE Intake (Mivec) camshaft brand new- $40 shipped
Evo 9 OE Exhaust camshaft brand new- $40 shipped
Evo 8 Gas Tank- just the tank- $150 shipped
This is a complete set of Longacre Racing Platen setups very similar part number 72943 which retails on their website for $2790. The only difference between this set and the one they currently sell are the adjustable spanners. The spanners on this set are not adjustable. This set is in great condition. Only imperfections are cosmetic scratches on the finish. No large dents or warping. No feet are broken and all are adjustable like they should be. I took some measurements when I set them up for pictures and here are the measurements I found:
9' 7" Long from front of front scale pad to rear of rear scale pad
70" Spanner length
83" width of the scale pads from side to side
60" Incline ramps
2 1/2" depth of scale pad pockets
Price includes freight shipping. May be able to coordinate pickup at a track if schedules happen to match up. Contact me with any questions and I will respond quickly.
Price is $1750 shipped.
As I said this post is a work in progress so PM me for any additional information you need.
RC Engineering 1600cc injectors- only used for about 5 hours - $350 shipped ($550 new)
4 Hoosier HWet 245/35/18 Rain Slicks- Brand new never mounted $950 shipped
-all have manufacture dates of 0408
Stock Evo 8 sway bar- $100 shipped
4 Yokohama Advan A048 285/30/18- used 4 sessions- lots of life left! - $500 shipped
-these slicks last alot longer compared to a Hoosier R6. We ran them for 4 sessions and they could probably run for 2 more days at the track. Still tons of life left!
Evo 8 rear crash beam- $105 shipped
Evo 8 rear bumper- hole trimmed for tow hook- holes drilled for APR rear diffuser $100 + freight
5Zigen FN01R-C 18x9.5 +35 wheels only- used for 2 race seasons- cosmetically a little banged up, but fine structurally- $600 shipped
Evo 8 ignition switch w/key- $75 shipped
Evo 9 Intake Manifold Regulator- $40 shipped
Evo 8 Trunk/Deck- $150 + shipping
Evo 9 OE Intake (Mivec) camshaft brand new- $40 shipped
Evo 9 OE Exhaust camshaft brand new- $40 shipped
Evo 8 Gas Tank- just the tank- $150 shipped
This is a complete set of Longacre Racing Platen setups very similar part number 72943 which retails on their website for $2790. The only difference between this set and the one they currently sell are the adjustable spanners. The spanners on this set are not adjustable. This set is in great condition. Only imperfections are cosmetic scratches on the finish. No large dents or warping. No feet are broken and all are adjustable like they should be. I took some measurements when I set them up for pictures and here are the measurements I found:
9' 7" Long from front of front scale pad to rear of rear scale pad
70" Spanner length
83" width of the scale pads from side to side
60" Incline ramps
2 1/2" depth of scale pad pockets
Price includes freight shipping. May be able to coordinate pickup at a track if schedules happen to match up. Contact me with any questions and I will respond quickly.
Price is $1750 shipped.
As I said this post is a work in progress so PM me for any additional information you need.
Last edited by voloracer; Apr 13, 2010 at 12:43 PM.
Trending Topics
#10
Newbie
Thread Starter
iTrader: (11)
Join Date: Jun 2009
Location: Utah
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
APR Canards
Nope, never installed them. We purchased them for a race application and realized they are more for street use once we received them. We went with the Voltex Canards instead. If you can come down to Orem and get these I'll give them to you for $120 cash. Brand new in perfect shape.
Voloracer
Voloracer