WRECKED EVO 9-- Major Sale, MUST SEE
Oct 19, 2009, 06:55 PM
#1
Evolving Member
Thread Starter
iTrader: (6)
Join Date: Apr 2007
Location: New York
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
WRECKED EVO 9-- Major Sale, MUST SEE
If you still are looking for parts, check out thread # 80
UPDATES FOUND AT POST # 44
Well this is depressing but here it goes...
About two weeks ago I came around a turn(not speeding or anything) to find a car coming the opposite direction in my lane. My choices were left(oncoming traffic) or right (woods). Well I went right , Went through a telephone pole and smashed my passanger side into a tree. Car was beautifully built with an FP Red and was tuned 3 weeks prior. Anyways, car was totaled by the insurance and I bought it back.
I'm looking to sell it and any additional parts I have because I am leaving the Evo community for a bit. I would like to sell the entire car, and all my stock/aftermarkewt goodies in one. This is my ideal plan but I'm open to other things as well. THIS IS A GREAT SITUATION FOR A SHOP WHO HAS THE ROOM TO HOUSE THIS CAR AND PART IT OUT. I'm not looking to make crazy money off this sale, just some return on investment. Listed below is the stock, aftermarket, and aftermarket BNIB parts I have. This is not to include all the parts on the car that are still good. The entire driver side, MR roof, full interior(The ONLY item I'm contemplating keeping is the Recaros), Bilstein Struts, Brembo Brake System, hEADLIGHTS, TAILLIGHT,etc...
I'm open to offers, like I said I would like to sell as much as I can in one lump, rather than parting individual pieces. Below is the list of parts I can think of that I have, and I'm sure I'm missing somethings. Attached are pictures from the storage yard. It will be back in my yard by the end of the week so I will be able to take better pictures.
Stock
• Airbox
• Snorkel
• Evo 9 turbo
• 2 Evo 9 WGA
• K&N Intake Drop In
• Intercooler
• LICP
• UICP
• Intake Mani
• Exhaust Mani
• Injectors
• MIVEC cams
• Headstuds
• Rodbolts
• O2 housing
• Battery
• Brake Lines
• Springs
• Rotors
• Heat shields
• Throttlebody
• Evo 8 Wheels, scuffed and curb rashed but not dented
After Market
• Evo 9 motor, Kelford MIVEC 272’s, ARP Headstuds and Rodbolts, FP Beehive ValveSprings 23k miles (Less than 1K on mods)
• Shep Built 5spd tranny 5k miles
• Carbonetic Twin Plate Clutch 5k miles
• Ported & Coated FP Red 80mm housing less than 1k miles
• ETS Gloss Black Short Route Piping
• Ported Exhaust/Intake Mani
• Three Speed Scattershield
• Ported 65mm TB
• Advan RS Gunmetal 17x9 +29off 2 perfect, 2 scuffed
• Dunlop Direzza Star Specs255/40/r17 ( less than 1k miles 3 perfect, one possible minor damage)
• Project Mu Street pads
• Rotor Pros Rotors
• Swift Springs
• Defi Gauges (Boost, Oil Temp & Press, Water Temp)
• AEM Wideband
• Greddy Profec B Spec II
• HKS Type 0 Turbotimer
• Kics R40’s gunmetal wheel locks
• Walboro 255 lph
• Tanabe Concept G, Rear is dented, down pipe and test pipe ok
• AMS Delrin Shift Knob
AFTERMARKET BNIB
• Greddy Catch Can
• RAYS Black Lug nuts
• Buschur Press in motor mounts
• ARC Heat Shield
THE BEFORE:
THE AFTER =( :
Nick
UPDATES FOUND AT POST # 44
Well this is depressing but here it goes...
About two weeks ago I came around a turn(not speeding or anything) to find a car coming the opposite direction in my lane. My choices were left(oncoming traffic) or right (woods). Well I went right , Went through a telephone pole and smashed my passanger side into a tree. Car was beautifully built with an FP Red and was tuned 3 weeks prior. Anyways, car was totaled by the insurance and I bought it back.
I'm looking to sell it and any additional parts I have because I am leaving the Evo community for a bit. I would like to sell the entire car, and all my stock/aftermarkewt goodies in one. This is my ideal plan but I'm open to other things as well. THIS IS A GREAT SITUATION FOR A SHOP WHO HAS THE ROOM TO HOUSE THIS CAR AND PART IT OUT. I'm not looking to make crazy money off this sale, just some return on investment. Listed below is the stock, aftermarket, and aftermarket BNIB parts I have. This is not to include all the parts on the car that are still good. The entire driver side, MR roof, full interior(The ONLY item I'm contemplating keeping is the Recaros), Bilstein Struts, Brembo Brake System, hEADLIGHTS, TAILLIGHT,etc...
I'm open to offers, like I said I would like to sell as much as I can in one lump, rather than parting individual pieces. Below is the list of parts I can think of that I have, and I'm sure I'm missing somethings. Attached are pictures from the storage yard. It will be back in my yard by the end of the week so I will be able to take better pictures.
Stock
• Airbox
• Snorkel
• Evo 9 turbo
• 2 Evo 9 WGA
• K&N Intake Drop In
• Intercooler
• LICP
• UICP
• Intake Mani
• Exhaust Mani
• Injectors
• MIVEC cams
• Headstuds
• Rodbolts
• O2 housing
• Battery
• Brake Lines
• Springs
• Rotors
• Heat shields
• Throttlebody
• Evo 8 Wheels, scuffed and curb rashed but not dented
After Market
• Evo 9 motor, Kelford MIVEC 272’s, ARP Headstuds and Rodbolts, FP Beehive ValveSprings 23k miles (Less than 1K on mods)
• Shep Built 5spd tranny 5k miles
• Carbonetic Twin Plate Clutch 5k miles
• Ported & Coated FP Red 80mm housing less than 1k miles
• ETS Gloss Black Short Route Piping
• Ported Exhaust/Intake Mani
• Three Speed Scattershield
• Ported 65mm TB
• Advan RS Gunmetal 17x9 +29off 2 perfect, 2 scuffed
• Dunlop Direzza Star Specs255/40/r17 ( less than 1k miles 3 perfect, one possible minor damage)
• Project Mu Street pads
• Rotor Pros Rotors
• Swift Springs
• Defi Gauges (Boost, Oil Temp & Press, Water Temp)
• AEM Wideband
• Greddy Profec B Spec II
• HKS Type 0 Turbotimer
• Kics R40’s gunmetal wheel locks
• Walboro 255 lph
• Tanabe Concept G, Rear is dented, down pipe and test pipe ok
• AMS Delrin Shift Knob
AFTERMARKET BNIB
• Greddy Catch Can
• RAYS Black Lug nuts
• Buschur Press in motor mounts
• ARC Heat Shield
THE BEFORE:
THE AFTER =( :
Nick
Last edited by xxNosTankxx; Nov 11, 2009 at 08:55 AM.
