Mark this thread as Unsold
830Whp Drag Evo Part Out!
#1
Evolved Member
Thread Starter
iTrader: (24)
Join Date: Jul 2009
Location: Delaware
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
830Whp Drag Evo Part Out!
First Name: Tyler
Last Name: Wolf
Location: Rhode Island
Willingness to ship: Yes
Selling: Going RWD
NOTE: BUYER WILL BE RESPONSIBLE FOR SHIPPING AND PAYPAL FEES!
OPEN TO OFFERS,
PM me or email me at twolf@udel.edu
A Ton of Parts are for sale So Ill Put the List up first and then Pictures will be at end of list!
Parts For Sale
DI Intake Manifold (8 Injector Setup, Comes With Fuel rail setup for -8 lines, powdercoated wrinkle black, and welded on iscv valve for idle control) - $850
Q45 Throttle Body, Powder coated wrinkle black - $100
Hoosier Slicks (Brand New!!! ALL4! 26x8.5x15) - $700
Inline Walbro 255 (Have 2) - $250 for both
Shifter Bracket (Consists of painted Black Housing, Torque Solution Short Shifter, Shifter Bushings and 5-spd Shift Nob) - $225
Shifter Cables - $75
OEM Rear Brembo Calipers (Painted Black) - $200
Agency Pwr Trailing Arms (Brand New) - $450
STM T4 Divided Manifold dual wastegates (High Temp Coated Black, Brand New Never used) $900
Dumps/Exhaust (Polished Dumps, 3 inch downpipe, hots part kit to Turbo) - $600
DTT LICP (V-band on licp to turbo, wrinkle black, tig welded, hot part kit to turbo) $300
DTT 4" Intake (Wrinkle Black, Hots part kit to turbo setup) -$250
OEM Evo 4g63 Lifters - $100
Oem Steering Rack - Make Offer
BrakeMan Drag Rear Pads - $125
ToxicFab Uicp (Wrinkle Black, Tial Bov flange, Iat bung, meth bung, aluminum) $200
Oem Front Axle - $100
Oem Rear Axles -$200 for both
ToxicFab Turn Down (Slip Fit, SS flanges) - $175
SOLD
Built 2.0L, Filled Block, Custom JE pistons, GRP Aluminum Rods, OEM Crank (Brand New) - $3000
BR Evo 9 Ported Head (Brand New) - 1000
Magnus Mechanical Fuel Setup With Aermotive regulator and mechanical fuel pump (Brand new never seen fuel) - $1400
Tilton Twin Carbon Clutch $400 OBO (Need rebuild, Tilton quoted 2200)
STM Staging Brake Setup - $450
SS Brake Lines (Brake Front and Rear) - $75
Scalloped Rotors (2 Brand New) - $150
Buschur Manual Brake Kit - $450
Front Subframe - Make Offer
Control arms With Solid bushings (ALL bushings brand new just installed, including ball joint) - Make Offer
Rear Subframe - $100
CBRE Wheel Bearings - $1600
STM firewall catch can (4 -6 an fittings, 3 breathers) - $450
Norris Desgins Dry Sump Setup (Brand New in original Packaging) - $3200
Rolling Chasis - Funny car cage, few more bars for 7.50 cert, Solid bushings, Pm for details and price
PTE 6766 ball bearing ported h-cover 1.32 hotside - $1600
Shep Trans - (Stage 1, New 1st and second gear, all new synchros, hubs, sliders, 4.11 final drive, evo 9 1/2 and evo 8 3/4, etc.) $2300 With good 5spd core, $3300 No core
Stock Tcase Non ACD (80k, great shape) - $1000
Torque Solution Solid Shifter Bushings - $20
GSC Power-Division 4G63 ZERO-TICK Lifters (Brand New) -$160
Kiggly Hla regulator - $100
STM Small Front Brake Kit - $900
Buschur Solid Underhood Bushings - $25
ETS 6" FMIC (Andonized Black) - $900
Fluidampr Harmonic Balancer - $200
SuperTech Dual Valve Springs - $100
Ebay Harness Bar - $100
Snow PerformanceMETH KIT - $100
Three Speed Scatter Shield (Black) - $175
Gforce 5 Point Harness (2 One still SFI approved for a over a year) -$125
Buschur Fuel Rail (-8 lines) - $125
Shep Rear Diff - $650
Stock Diff - $300
QuarterMaster 8leg Race (Brand New, Hydraulic TOB) - $1550
Buschur RacingMustache Bar - $225
Buschur Racing Side Diff Supports -$225
Shep Tcase - (Brand new, Stage 2, Quaiffe, new ring and pinion) $2400 with good core, $3400 No Core
Avid Motor Mounts - $400
AWD D2 -$750
Pictures
Turbo Kit Parts
Clutch
Fluidampr
STM Small front brake kit (Better Pics to come)
Shep Trans
Shifter Cables
Steering Rack/Subframe
Shifter Assembly
Staging Brake
Buschur Manual Brake Setup
Inline 255
DI Intake Manifold and Fuel Rail
[URL=http://s1109.photobucket.com/user/GGevo921/media/DIFuelRail4_zpse0b0fe52.jpeg.html]
BR Fuel Rail
3Speed Scatter Shield
ToxicFab Turndown
Last Name: Wolf
Location: Rhode Island
Willingness to ship: Yes
Selling: Going RWD
NOTE: BUYER WILL BE RESPONSIBLE FOR SHIPPING AND PAYPAL FEES!
OPEN TO OFFERS,
PM me or email me at twolf@udel.edu
A Ton of Parts are for sale So Ill Put the List up first and then Pictures will be at end of list!
Parts For Sale
DI Intake Manifold (8 Injector Setup, Comes With Fuel rail setup for -8 lines, powdercoated wrinkle black, and welded on iscv valve for idle control) - $850
Q45 Throttle Body, Powder coated wrinkle black - $100
Hoosier Slicks (Brand New!!! ALL4! 26x8.5x15) - $700
Inline Walbro 255 (Have 2) - $250 for both
Shifter Bracket (Consists of painted Black Housing, Torque Solution Short Shifter, Shifter Bushings and 5-spd Shift Nob) - $225
Shifter Cables - $75
OEM Rear Brembo Calipers (Painted Black) - $200
Agency Pwr Trailing Arms (Brand New) - $450
STM T4 Divided Manifold dual wastegates (High Temp Coated Black, Brand New Never used) $900
Dumps/Exhaust (Polished Dumps, 3 inch downpipe, hots part kit to Turbo) - $600
DTT LICP (V-band on licp to turbo, wrinkle black, tig welded, hot part kit to turbo) $300
DTT 4" Intake (Wrinkle Black, Hots part kit to turbo setup) -$250
OEM Evo 4g63 Lifters - $100
Oem Steering Rack - Make Offer
BrakeMan Drag Rear Pads - $125
ToxicFab Uicp (Wrinkle Black, Tial Bov flange, Iat bung, meth bung, aluminum) $200
Oem Front Axle - $100
Oem Rear Axles -$200 for both
ToxicFab Turn Down (Slip Fit, SS flanges) - $175
SOLD
Built 2.0L, Filled Block, Custom JE pistons, GRP Aluminum Rods, OEM Crank (Brand New) - $3000
BR Evo 9 Ported Head (Brand New) - 1000
Magnus Mechanical Fuel Setup With Aermotive regulator and mechanical fuel pump (Brand new never seen fuel) - $1400
Tilton Twin Carbon Clutch $400 OBO (Need rebuild, Tilton quoted 2200)
STM Staging Brake Setup - $450
SS Brake Lines (Brake Front and Rear) - $75
Scalloped Rotors (2 Brand New) - $150
Buschur Manual Brake Kit - $450
Front Subframe - Make Offer
Control arms With Solid bushings (ALL bushings brand new just installed, including ball joint) - Make Offer
Rear Subframe - $100
CBRE Wheel Bearings - $1600
STM firewall catch can (4 -6 an fittings, 3 breathers) - $450
Norris Desgins Dry Sump Setup (Brand New in original Packaging) - $3200
Rolling Chasis - Funny car cage, few more bars for 7.50 cert, Solid bushings, Pm for details and price
PTE 6766 ball bearing ported h-cover 1.32 hotside - $1600
Shep Trans - (Stage 1, New 1st and second gear, all new synchros, hubs, sliders, 4.11 final drive, evo 9 1/2 and evo 8 3/4, etc.) $2300 With good 5spd core, $3300 No core
Stock Tcase Non ACD (80k, great shape) - $1000
Torque Solution Solid Shifter Bushings - $20
GSC Power-Division 4G63 ZERO-TICK Lifters (Brand New) -$160
Kiggly Hla regulator - $100
STM Small Front Brake Kit - $900
Buschur Solid Underhood Bushings - $25
ETS 6" FMIC (Andonized Black) - $900
Fluidampr Harmonic Balancer - $200
SuperTech Dual Valve Springs - $100
Ebay Harness Bar - $100
Snow PerformanceMETH KIT - $100
Three Speed Scatter Shield (Black) - $175
Gforce 5 Point Harness (2 One still SFI approved for a over a year) -$125
Buschur Fuel Rail (-8 lines) - $125
Shep Rear Diff - $650
Stock Diff - $300
QuarterMaster 8leg Race (Brand New, Hydraulic TOB) - $1550
Buschur RacingMustache Bar - $225
Buschur Racing Side Diff Supports -$225
Shep Tcase - (Brand new, Stage 2, Quaiffe, new ring and pinion) $2400 with good core, $3400 No Core
Avid Motor Mounts - $400
AWD D2 -$750
Pictures
Turbo Kit Parts
Clutch
Fluidampr
STM Small front brake kit (Better Pics to come)
Shep Trans
Shifter Cables
Steering Rack/Subframe
Shifter Assembly
Staging Brake
Buschur Manual Brake Setup
Inline 255
DI Intake Manifold and Fuel Rail
[URL=http://s1109.photobucket.com/user/GGevo921/media/DIFuelRail4_zpse0b0fe52.jpeg.html]
BR Fuel Rail
3Speed Scatter Shield
ToxicFab Turndown
Last edited by GGevo921; Apr 8, 2014 at 06:38 PM.
Trending Topics
#10
Evolved Member
Thread Starter
iTrader: (24)
Join Date: Jul 2009
Location: Delaware
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust is a vband style stainless steel 3" exhaust that goes out Te side of the bumper. Designed to fit my manifold and turbo kit along with the licp and dumps. Has 02 welded in it for tuning and was used only for 4 track passes.
Lmk if you have any other questions.
Thanks
Lmk if you have any other questions.
Thanks
#12
Evolved Member
Thread Starter
iTrader: (24)
Join Date: Jul 2009
Location: Delaware
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
All Pms replied!!
Items sold so far. Will update list soon.
Mustache bar (pending)
Side diff supports
Tcase
Awd d2
Fluidampr
G force harness (pending)
eBay harness bar (pending)
Buschur baffled oil pan
Valve springs
Items sold so far. Will update list soon.
Mustache bar (pending)
Side diff supports
Tcase
Awd d2
Fluidampr
G force harness (pending)
eBay harness bar (pending)
Buschur baffled oil pan
Valve springs