Mark this thread as Unsold
[FS] Built EVO 8 part out VERY low miles
Aug 5, 2014, 06:45 AM
#1
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Jun 2006
Location: Marietta, PA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Built EVO 8 part out VERY low miles
Update- still have the rear diff and axles, I will sell the assembly for 800 shipped or may part out the diff and axles for the right price, and I have just a few other things. just a few other items.
Almost everything on the build has 250 miles, 35K on the body. I have owned the car for the past 9 years. Everything includes shipping to the lower 48, if you live outside of that please contact me. Some of the items are brand new as they never went on, ordered incorrectly, etc. The only remaining interior pieces I have are an auto power cage and the front seats. The shell is spoken for by a friend therefore the only exterior pieces I have are an APR front bumper and RS mirrors.
BR 272's - $425
AEM tru-time cam gears - sold
Will sell cams, cam gears, and brand new cam angle sensor all together - $525
DBA 4000 T3's - Sold
Hawk HPS pads - sold(will not separate)
BR lightweight front cross member - sold
Brembo's new seals, powdercoated by detective coating - $550
HKS DLI 2 includes harns - sold
Spoolin COP sequential ingition Brand New In Box(will not work with stock ECU)- sold
EVO tail lights (gunmetal like the IX fronts) - $sold
ETS upper IC pipe short route, tial flange, AIT bung, flat black - sold
Tial QR - sold
Will sell full upper IC pipe w/Tial QR- sold
AMS cat back w/test pipe - $300 (Regency power muffler I believe is what they used to fit the USDM bumpers)
Black RS mirrors - $100 (mileage unknown)
Cusco 23mm adjustable rear sway bar - Sold
Rear diff - $800 for assembly w/mustache bar and axles (35K Miles was re-stacked in correct order per mitsu service manual)
I also have the front seats, steering wheel, and a few other things I just need to take some photos.
BR 2.3 stroker shortblock- SOLD
shep stage 2 transfer case with quaife LSD- SOLD
BR HTA 3582R FP turbo kit Full V-Band - SOLD
The turbo comes drop in ready includes the turbo kit from BR with Tial wastegate ($4300) a custom tubular manifold, dump tube, and O2 delete ($1500) upgraded from T31 to Garrett T-3 turbine housing ($400) custom tial wastegate springs ($40) Blue/Blue and STM pro-series oil return line ($105) I will also include a BNIB DEI turbo blanket from BR with install kit and heat wrap ($170)
ETS 4" SD intake - SOLD
ETS 4" IC, has small dent in end tank, I don't believe it will be noticeable with coupler on - SOLD
Auto power 6 point cage - SOLD
BC Racing BR coilovers (8K Front/6K Rear, 30 way adjustable dampening, independently adjustable ride height, rebuildable) - SOLD
Exedy triple - SOLD
Buddy Club 17x9 QF P1's (forged magnesium alloy 14lbs) w/nitto NT05 255/40/17's - Sold
MAP Rev. 2 intake manifold w/EGR block and ceramic coating 65mm- Sold
Mil spec 65mm throttle body - Sold
BR fuel rail - Sold
APR front bumper- prefer pick up but will ship greyhound at buyers expense. SOLD
ETS LICP flat black for stock frame turbo(brand new in box) - SOLD
I do have additional photos of a lot of the stuff on my phone just ask and send me your number and if I have them I will send them. The rear diff comes out this weekend, looks like any other rear diff, except the plates were restacked during the build, so 250 miles ago. I can have them placed back in the original order if you so choose.
Almost everything on the build has 250 miles, 35K on the body. I have owned the car for the past 9 years. Everything includes shipping to the lower 48, if you live outside of that please contact me. Some of the items are brand new as they never went on, ordered incorrectly, etc. The only remaining interior pieces I have are an auto power cage and the front seats. The shell is spoken for by a friend therefore the only exterior pieces I have are an APR front bumper and RS mirrors.
BR 272's - $425
AEM tru-time cam gears - sold
Will sell cams, cam gears, and brand new cam angle sensor all together - $525
DBA 4000 T3's - Sold
Hawk HPS pads - sold(will not separate)
BR lightweight front cross member - sold
Brembo's new seals, powdercoated by detective coating - $550
HKS DLI 2 includes harns - sold
Spoolin COP sequential ingition Brand New In Box(will not work with stock ECU)- sold
EVO tail lights (gunmetal like the IX fronts) - $sold
ETS upper IC pipe short route, tial flange, AIT bung, flat black - sold
Tial QR - sold
Will sell full upper IC pipe w/Tial QR- sold
AMS cat back w/test pipe - $300 (Regency power muffler I believe is what they used to fit the USDM bumpers)
Black RS mirrors - $100 (mileage unknown)
Cusco 23mm adjustable rear sway bar - Sold
Rear diff - $800 for assembly w/mustache bar and axles (35K Miles was re-stacked in correct order per mitsu service manual)
I also have the front seats, steering wheel, and a few other things I just need to take some photos.
BR 2.3 stroker shortblock- SOLD
shep stage 2 transfer case with quaife LSD- SOLD
BR HTA 3582R FP turbo kit Full V-Band - SOLD
The turbo comes drop in ready includes the turbo kit from BR with Tial wastegate ($4300) a custom tubular manifold, dump tube, and O2 delete ($1500) upgraded from T31 to Garrett T-3 turbine housing ($400) custom tial wastegate springs ($40) Blue/Blue and STM pro-series oil return line ($105) I will also include a BNIB DEI turbo blanket from BR with install kit and heat wrap ($170)
ETS 4" SD intake - SOLD
ETS 4" IC, has small dent in end tank, I don't believe it will be noticeable with coupler on - SOLD
Auto power 6 point cage - SOLD
BC Racing BR coilovers (8K Front/6K Rear, 30 way adjustable dampening, independently adjustable ride height, rebuildable) - SOLD
Exedy triple - SOLD
Buddy Club 17x9 QF P1's (forged magnesium alloy 14lbs) w/nitto NT05 255/40/17's - Sold
MAP Rev. 2 intake manifold w/EGR block and ceramic coating 65mm- Sold
Mil spec 65mm throttle body - Sold
BR fuel rail - Sold
APR front bumper- prefer pick up but will ship greyhound at buyers expense. SOLD
ETS LICP flat black for stock frame turbo(brand new in box) - SOLD
I do have additional photos of a lot of the stuff on my phone just ask and send me your number and if I have them I will send them. The rear diff comes out this weekend, looks like any other rear diff, except the plates were restacked during the build, so 250 miles ago. I can have them placed back in the original order if you so choose.
Last edited by cdupont03; Dec 15, 2014 at 02:19 PM.
Trending Topics
Aug 7, 2014, 04:51 PM
#9
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Jun 2006
Location: Marietta, PA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Bump, I updated prices.. If your interested in the motor/turbo/transfer make me an offer I need to get some of this stuff gone... Please don't send me anything ridiculous though, quality parts with super low miles. Your not going to find parts this nice with such low miles at these prices.
Aug 8, 2014, 01:38 PM
#14
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Jun 2006
Location: Marietta, PA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Evowagon- I know it sucks that was the one thing on the car I didnt want to mess up since it's very hard to find a replacement since they no longer make those wheels. Turns out it was one of the only things that I damaged... A wheel, front bumper, dent in the intercooler, and a cracked windshield from passenger not wearing their seat belt.
I would consider selling the rear axles, was hoping to sell the rear axles and diff together but send me an offer and we will see if we can work something out.
I would consider selling the rear axles, was hoping to sell the rear axles and diff together but send me an offer and we will see if we can work something out.
Aug 9, 2014, 09:45 AM
#15
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Jun 2006
Location: Marietta, PA
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Bump prices updated, this stuff needs to go. ALMOST EVERYTHING HAS ONLY 250 MILES ON IT, NO CORES REQUIRED, PAYPAL AND SHIPPING FEES INCLUDED!! First come, first serve..