Mark this thread as Unsold
Stasis rotors and pads.
#1
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Jul 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Stasis rotors and pads.
Two piece stasis front brake rotors with Carbotech Panther XP8s brake pads (less than 1000 miles and one track visit) ---450+shipping
These came with a car i bought and i dont track race the car so i dont need them. Fit evo 8.
These came with a car i bought and i dont track race the car so i dont need them. Fit evo 8.
#2
Evolving Member
iTrader: (11)
Join Date: Oct 2004
Location: California
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
can you sent me a picture
david@unisonusa.com
david@unisonusa.com
#6
Evolved Member
iTrader: (15)
Join Date: Feb 2002
Location: nj
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
i would like pics as well too Mlanceroz02@aol.com
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Jul 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Heres some pics
I just got these off the car is why im adding to the description. Theres some small nicks on the back of rotor 2. I dont know how they got there but i dont see it being a problem. They are very shallow compared to the 1/8" deep half moon shapes. They are not warped or cracked. There are no noticable grooves or wear lips or the edges.
The pads are free, buyer can have them. One of them is loose on its mount, i dont know if that means its any good or not.
Previous owner of the car said they had about 1000 miles and one track visit. I put about 800 miles on them normal driving.
I just got these off the car is why im adding to the description. Theres some small nicks on the back of rotor 2. I dont know how they got there but i dont see it being a problem. They are very shallow compared to the 1/8" deep half moon shapes. They are not warped or cracked. There are no noticable grooves or wear lips or the edges.
The pads are free, buyer can have them. One of them is loose on its mount, i dont know if that means its any good or not.
Previous owner of the car said they had about 1000 miles and one track visit. I put about 800 miles on them normal driving.
#15
Evolved Member
iTrader: (23)
Join Date: Dec 2003
Location: Boulder, CO
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
They have good stopping power and are distinctly lighter than stock -- 9lbs per corner if I remember correctly. Oddly I do get a bit of a warped feel under light braking from them when cold to slightly warm. They are, however, consistent and solid under heavy braking and perform great when hot.
I have yet to look into replacements but I would assume that you can get them from either Stasis or maybe Alcon as they make the rotor.
I have yet to look into replacements but I would assume that you can get them from either Stasis or maybe Alcon as they make the rotor.