Mark this thread as Unsold
Lancer Air ride kit for sale! FBSS!
Apr 17, 2007, 06:41 AM
#1
Evolving Member
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: California
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Lancer Air ride kit for sale! FBSS!
SOLD SOLD SOLD!!!!
1500$ (price includes shipping) OR BEST OFFER!
Hey guys, you may have come over my thread in the show and shine forums w/ my pics:
http://www.drewswurld.com/pics/airride
Well, after a few weeks of being installed, my wife hates it. I got 2 kids, and when ever I lift or lower the car she throws a fit, so im forced to sell.
This kit will add some serious SHOW quality to your car, and is a lot of fun. I will be available for tech help to get you through the install. There will be some light drilling that will need to be done, but thats it.
As you probably recognize this kit, I bought it from a reputable evoM member OZLancerLunatic.
It had been off his car for a while, and there was quite a bit of $$ added to get everything going.
FYI I purchased this kit for 1500$ shipped from the east coast to the west coast.
I am offering the same price, which will come w/ the following items I was REQUIRED to buy.
- New 10 switch switch-box for FBSS, all up, teeter totter, and individual corner action. (25$ + ship)
- New craftsman water trap rated at 175psi (24$ @ sears)
- Gauges 2 dual needle gauges, and 1 single needle gauge (40$ + ship)
- Various hose fittings (spent about 50$ in misc fittings for gauges)
- Swivel fittings for the front setup (38$ @ Fastenal)
- Mounting block for accumulator tank( 5$, just wood and stock carpet from trunk)
- Tripple gauge pillar (30$ + ship) [will only include if there is a trade for the stock pillar. This is a plastic pillar that is attached to the stock pillar after modification]
- Gauge hose ($13.99 + ship)
- Grounding block ( $4 @ orchard supply )
- Mounting brackets + self taping screws (9$ @ orchard)
----I invested about 250 bucks to get this going for myself, so you practically get that for free---
The kit will come complete w/ the following:
- Front air struts from airbagit.com (Retail over 900$)
- Rear air cylinders + accumulator tank ( Retail over 800$)
- 5-6 Gallon tank (unsure if its 5 or 6 gal)
- Air compressor (150psi max working pressure)
- Steel braided lines 2 to the accumulator, 2 to the rear cylinders, and 2 to the front struts
- 8 fast action valves which I rebuilt and oiled. ( over 40$ a peice retail)
- A crap load of fittings (probably over 150$ in fittings
- Pressure switch (120psi on - 150psi off)
- All mounting hardware.
All you need is tools, and paitence. This takes some time to install.
Shipping will be UPS ground insurance included (will be well over 200$ for shipping, so im taking a loss on this one :-( )
I am available for all questions, and have plenty of patience, so let me know if you are interested. I will also split up kit 1/2 if that works out better for you. e-mail questions to
andy@drewswurld.com
AIM: MegaPathAndy
Yahoo: AfterHoursAndy
MSN: drewswurldcom@hotmail.com
Will accept Paypal,Personal Check(must clear) or Money order(must be sent signature mail-so you know i got it) as payment.
Thanks for looking!
1500$ (price includes shipping) OR BEST OFFER!
Hey guys, you may have come over my thread in the show and shine forums w/ my pics:
http://www.drewswurld.com/pics/airride
Well, after a few weeks of being installed, my wife hates it. I got 2 kids, and when ever I lift or lower the car she throws a fit, so im forced to sell.
This kit will add some serious SHOW quality to your car, and is a lot of fun. I will be available for tech help to get you through the install. There will be some light drilling that will need to be done, but thats it.
As you probably recognize this kit, I bought it from a reputable evoM member OZLancerLunatic.
It had been off his car for a while, and there was quite a bit of $$ added to get everything going.
FYI I purchased this kit for 1500$ shipped from the east coast to the west coast.
I am offering the same price, which will come w/ the following items I was REQUIRED to buy.
- New 10 switch switch-box for FBSS, all up, teeter totter, and individual corner action. (25$ + ship)
- New craftsman water trap rated at 175psi (24$ @ sears)
- Gauges 2 dual needle gauges, and 1 single needle gauge (40$ + ship)
- Various hose fittings (spent about 50$ in misc fittings for gauges)
- Swivel fittings for the front setup (38$ @ Fastenal)
- Mounting block for accumulator tank( 5$, just wood and stock carpet from trunk)
- Tripple gauge pillar (30$ + ship) [will only include if there is a trade for the stock pillar. This is a plastic pillar that is attached to the stock pillar after modification]
- Gauge hose ($13.99 + ship)
- Grounding block ( $4 @ orchard supply )
- Mounting brackets + self taping screws (9$ @ orchard)
----I invested about 250 bucks to get this going for myself, so you practically get that for free---
The kit will come complete w/ the following:
- Front air struts from airbagit.com (Retail over 900$)
- Rear air cylinders + accumulator tank ( Retail over 800$)
- 5-6 Gallon tank (unsure if its 5 or 6 gal)
- Air compressor (150psi max working pressure)
- Steel braided lines 2 to the accumulator, 2 to the rear cylinders, and 2 to the front struts
- 8 fast action valves which I rebuilt and oiled. ( over 40$ a peice retail)
- A crap load of fittings (probably over 150$ in fittings
- Pressure switch (120psi on - 150psi off)
- All mounting hardware.
All you need is tools, and paitence. This takes some time to install.
Shipping will be UPS ground insurance included (will be well over 200$ for shipping, so im taking a loss on this one :-( )
I am available for all questions, and have plenty of patience, so let me know if you are interested. I will also split up kit 1/2 if that works out better for you. e-mail questions to
andy@drewswurld.com
AIM: MegaPathAndy
Yahoo: AfterHoursAndy
MSN: drewswurldcom@hotmail.com
Will accept Paypal,Personal Check(must clear) or Money order(must be sent signature mail-so you know i got it) as payment.
Thanks for looking!
Last edited by EarsLikenElf; May 2, 2007 at 06:23 AM.
damn sucks u gota sell
Apr 19, 2007, 01:09 PM
#7
Evolving Member
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: California
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Only modification to the car itself is that 2 holes will need to be drilled in the rear(in the spare tire well) to get the hoses to the front of the car. Nothing else needs modification.
I used a nice thick peice of plywood, and a longer screw to hold the assembly to the car(using the spare tire bolt hole.)
I used a nice thick peice of plywood, and a longer screw to hold the assembly to the car(using the spare tire bolt hole.)
Trending Topics
Apr 21, 2007, 06:17 PM
#9
Evolving Member
Thread Starter
iTrader: (6)
Join Date: May 2004
Location: California
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Bump again! I am having second thoughts about selling, I had a blast w/ this thing today. PM me if interested, before i change my mind!
Construction zones are fun, the guys w/ the slow signs drop thier mouths when they see a lancer PFFT side to side lol.
Construction zones are fun, the guys w/ the slow signs drop thier mouths when they see a lancer PFFT side to side lol.
