Mark this thread as Unsold
Buschur's Quick-Release Harness Bar Final Production Run
#226
Evolved Member
iTrader: (53)
Yes, we sell pins by themselves, we'd have to figure out the cost as right now it's all bunched together and then the percentage is added to the total to figure out what we sell it for as a kit. Just give Nick a call.
We have two orders here now for bars, I will make another run of them if we just have a total of 5 orders. So, for those of you that want harness bars call and place an order, be sure to tell them what color you want them powder coated in and if you want the bolt in tabs welded to the bars or if you are going to use wrap around harnesses. I will put the order in for Gary to start 5 more kits. It's gonna be a few weeks to have them completed but we will start on the next 5 now.
Yes, the bars are quick release at the lower section too, the main bolt in tabs at the seat belt upper and lower stay in place. Yes, the stock belts work with this harness bar in place.
We have two orders here now for bars, I will make another run of them if we just have a total of 5 orders. So, for those of you that want harness bars call and place an order, be sure to tell them what color you want them powder coated in and if you want the bolt in tabs welded to the bars or if you are going to use wrap around harnesses. I will put the order in for Gary to start 5 more kits. It's gonna be a few weeks to have them completed but we will start on the next 5 now.
Yes, the bars are quick release at the lower section too, the main bolt in tabs at the seat belt upper and lower stay in place. Yes, the stock belts work with this harness bar in place.
#238
how did you guys get the bolt out of the seatbelt asssembly? After all the plastic is off? I'm assuming I'm to replace the bolt in the seatbelt with one of the bolts that came with the kit - 4 long ones with a smooth part and 2 with a nut partially on it.. right?
one of you who bought and installed this, help me out i started this group buy
Just to check - did you guys put a washer before putting the retainer ring back? or add one of the thicker ones that was provided with the kit? not sure what the design is to be
one of you who bought and installed this, help me out i started this group buy
Just to check - did you guys put a washer before putting the retainer ring back? or add one of the thicker ones that was provided with the kit? not sure what the design is to be
Last edited by kyoo; May 12, 2012 at 07:40 PM.
#239
potentially stupid question here:
this is where the quick release pin goes through right? because mine will not fit through those holes at all (yes I'm not forgetting to press the button, but the pin won't even get to that point anyway) - anyone else find this?
it will not go through AT ALL - wonder if i'm doing something wrong? these are the two larger quick release pins that came with the kit.
this is where the quick release pin goes through right? because mine will not fit through those holes at all (yes I'm not forgetting to press the button, but the pin won't even get to that point anyway) - anyone else find this?
it will not go through AT ALL - wonder if i'm doing something wrong? these are the two larger quick release pins that came with the kit.
#240
Newbie
iTrader: (8)
Kyoo you will have to use a file to open it up some. They thought I was crazy when I said they didn't fit as they said they made the holes in house and checked them but clearly they weren't checked. So just take your time to file it a little so that the push pins will fit and not be too loss are else it will take away from the whole idea of a tight fit.