Mark this thread as Unsold
FS: custom CCW SP16 18x11 wheel with 3" lip
#1
FS: custom CCW SP16 18x11 wheel with 3" lip
I have TWO custom built CCW SP16 wheels for sale. They are a custom lightweight version of the SP16. It has machined out center/lug areas as well as back cut spokes. Per CCW's testing - these are STRONGER and have less flex than the CCW Classics that we are all familiar with. If you look at the SP16 on CCW's website you will see how the center is machined out. These are 18x11". They fit on my EVO IX autocross car with a 15mm spacer, which is the same size spacer I use for my 18x10+32 WedsSport SA70. . . you WILL need wider fenders in the front or rear to run these.
I used to run these staggered in the front with an 18x10 wheel in the back to get absolutely as much grip as I could out of my 285-width Hoosiers. We won an SCCA Solo2 National Championship in StreetMod in 2008 running these wheels. Unfortunately after I added some new suspension bits to add caster it pushed the wheels too far forward. I would have to radically chop my Voltex front bumper to keep using these, so that's why they are now up for sale. . .
New price from CCW is $675 each plus shipping. For sale for $1100 shipped for the pair.
I used to run these staggered in the front with an 18x10 wheel in the back to get absolutely as much grip as I could out of my 285-width Hoosiers. We won an SCCA Solo2 National Championship in StreetMod in 2008 running these wheels. Unfortunately after I added some new suspension bits to add caster it pushed the wheels too far forward. I would have to radically chop my Voltex front bumper to keep using these, so that's why they are now up for sale. . .
New price from CCW is $675 each plus shipping. For sale for $1100 shipped for the pair.
#2
Evolved Member
iTrader: (4)
Join Date: Jun 2008
Location: Philly Burbs
Posts: 945
Likes: 0
Received 0 Likes
on
0 Posts
bump for some super nice looking wheels. glws man, they are so clean. in your post, did you say you were running a staggered wheel on the evo? did you mean with a staggered offset or different size wheels front and back?
good price, should go quick if someone can pick up another two!
good price, should go quick if someone can pick up another two!
#7
I believe they are around a 25mm offset. I ran them with a 15mm spacer and a 285 tire and they cleared my inner fenders and coilovers just as well as my 18x10's.
In these pics I have the CCW's in the front and the Wedssports in the rear, as well as Voltex front fenders which are about 20mm wider than stock I think . . .
In these pics I have the CCW's in the front and the Wedssports in the rear, as well as Voltex front fenders which are about 20mm wider than stock I think . . .