2slow4now

iTrader: (5)

These are not OEM center caps. Just to get that out there so there isn't any confusion of what they are. I made these with a mold and cast them out of a plastic resin and then coated them with a plastic adhesion promoter primer, then wheel silver, some sanding, recoating, and a wheel clear all made by duplicolor. Look about as good as OEM. Since the OEM one's are injection molded they come out better. There are some slight imperfections but most all are on the back side and will never be seen. If you wet sanded them and hit with another coat of clear they would look great!

They are molded from evo 8 caps part number mr244232.



Here is the thread that I posted up to see what people thought. https://www.evolutionm.net/forums/ev...nter-caps.html

All I'm asking is $22 for a set of 4. Shipping will be Probably usps and in a package about 7 x 8 x 0.5 around 8 ounces from 47564. Probably around $5 depending on your location.
I'm just trying to recoupe a little of my money back for the investment. Trying to share some evo love.

2slow4now

iTrader: (5)

A couple pics installed in the wheel.







I'm not including the wire keepers that hold them in. They can be held in with a small bead of silicone on the back side or you can buy some keepers.

You can PM me or send an email to 2slow4now@gmail.com
Just put center caps or evom in the subject in case it goes to spam.