Mark this thread as Unsold
FS (MD) Enkei RPF1 17x9.5 +38
#1
FS (MD) Enkei RPF1 17x9.5 +38
Trending Topics
#8
#9
20mm spacer would be needed up front to fit on an evo. I currently run this setup for autox (with Z2's). Works very well looks pretty good too. A small spacer isn't a bad idea for the rear either (3mm is what I used) just to get the wheel that little bit farther off of the suspension components, but no spacer in the rear works fine too.
GLWS! they look very nice.
GLWS! they look very nice.
#15
I have these same wheels in same sizes. Lowered on tein springs with 255/40 rt615k. Fit great with no rubbing issues
I have a 20mm spacer in front but it looks like it could use a little less. A small spacer in rear would make it look much better as stated.
I fit a 275 in the rear also with no rubbing. Didn't try the fronts. But I doubt it would work because of the spacer
I have a 20mm spacer in front but it looks like it could use a little less. A small spacer in rear would make it look much better as stated.
I fit a 275 in the rear also with no rubbing. Didn't try the fronts. But I doubt it would work because of the spacer