Mark this thread as Unsold
Turbo Kit Part Out - Lancer 02-03
#1
Evolved Member
Thread Starter
iTrader: (2)
Join Date: Jun 2004
Location: Long Island, NY
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Kit Part Out - Lancer 02-03
Everything here is for sale. Make me an offer via PM. Heres some details.
1) Manual Boost Controller - Worked great. Turn the dial to up the boost or turn it down. Hooks up via a tee in your vac line between the WG and Turbo. Shipping - $3 - SOLDDDDD
2) Boost Gauge - Smoked black face when off, lights up when power applied. -30hg to 30psi, completely accurate when it was on the car. White lettering when lit. Shipping - $3
3) T25 oil and water cooled turbo with 4g94 manifold and Downpipe w/ 2 o2 sensor bungs - THE TURBO NEEDS A REBUILD. it runs and boosts fine, but the seal inside is going so you burn a little oil smoke for the first 3minutes in the morning, after that its fine. Shaft spins freely, some side to side motion (sign of a rebuild as well) but its not hitting the sides. Blades are straight and free of dings. Manifold is clean, has a predrilled and tapped hole in the right most runner for a 1/8"NPT EGT gauge probe. Downpipe was custom made. Flange mates up to the turbo. makes a 90 degree turn and goes under the car to mate up to a custom mid pipe. 2.5" with 2 O2 bungs welded in for stock O2 and Wideband O2. Shipping for this is $50 since its heavy.SOLDDDDD
3) Stock Evo Pipes and Couplers - What you see is what you get. Not much more to say about these - sShipping is $10
4) 18x7x2.5 intercooler - 2.5 in and out, no damaged fins, pressure loss at 7lbs was .3psi. 2 tabs at the bottom for mounting or 1 threaded hole at top. Fits behind stock bumper without major modification. Shipping is $10 - SOLDDDDDDDDDDD
5) Greddy Type S Style BOV - This isnt a real one, its a knockoff, but it worked flawlessly. With a recirculated BOV there was no pressure loss. Held boost fine, no leaks, and blew off air great. Even with the recirc hose on there it has a sick sound. Awesome. Included is the 2nd spring for higher boost applications. Also included is the flange to mate it to the stock EVO pipe. Shipping - $5 - SOLD!!!!!!!!!!!!!!
6) 3 gauge carbon Fiber look gauge pod. Fits Evo and Lancer. Mounted mine right on top of the stock pillar. Worked great. Shipping - $7
SOLD!
SOLDDDDD
SOLDDDDD
SOLDDDDD
SOLD!
SOLD!
SOLD!
1) Manual Boost Controller - Worked great. Turn the dial to up the boost or turn it down. Hooks up via a tee in your vac line between the WG and Turbo. Shipping - $3 - SOLDDDDD
2) Boost Gauge - Smoked black face when off, lights up when power applied. -30hg to 30psi, completely accurate when it was on the car. White lettering when lit. Shipping - $3
3) T25 oil and water cooled turbo with 4g94 manifold and Downpipe w/ 2 o2 sensor bungs - THE TURBO NEEDS A REBUILD. it runs and boosts fine, but the seal inside is going so you burn a little oil smoke for the first 3minutes in the morning, after that its fine. Shaft spins freely, some side to side motion (sign of a rebuild as well) but its not hitting the sides. Blades are straight and free of dings. Manifold is clean, has a predrilled and tapped hole in the right most runner for a 1/8"NPT EGT gauge probe. Downpipe was custom made. Flange mates up to the turbo. makes a 90 degree turn and goes under the car to mate up to a custom mid pipe. 2.5" with 2 O2 bungs welded in for stock O2 and Wideband O2. Shipping for this is $50 since its heavy.SOLDDDDD
3) Stock Evo Pipes and Couplers - What you see is what you get. Not much more to say about these - sShipping is $10
4) 18x7x2.5 intercooler - 2.5 in and out, no damaged fins, pressure loss at 7lbs was .3psi. 2 tabs at the bottom for mounting or 1 threaded hole at top. Fits behind stock bumper without major modification. Shipping is $10 - SOLDDDDDDDDDDD
5) Greddy Type S Style BOV - This isnt a real one, its a knockoff, but it worked flawlessly. With a recirculated BOV there was no pressure loss. Held boost fine, no leaks, and blew off air great. Even with the recirc hose on there it has a sick sound. Awesome. Included is the 2nd spring for higher boost applications. Also included is the flange to mate it to the stock EVO pipe. Shipping - $5 - SOLD!!!!!!!!!!!!!!
6) 3 gauge carbon Fiber look gauge pod. Fits Evo and Lancer. Mounted mine right on top of the stock pillar. Worked great. Shipping - $7
SOLD!
SOLDDDDD
SOLDDDDD
SOLDDDDD
SOLD!
SOLD!
SOLD!
Last edited by Sicktght311; Jan 16, 2007 at 07:19 AM.