Mark this thread as Unsold
Revolver Cams For Sale (Cheap)
#1
Newbie
Thread Starter
iTrader: (14)
Join Date: Nov 2004
Location: OKC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Revolver Cams For Sale (Cheap)
Ok, well I have been trying to get rid of my spare parts. These cams are very aggressive and require springs / retainers to run correctly. I made GREAT mid range and top end power with these, but they were just a bit too aggressive for me. (And my neighbors). I ended up going with FP 280's and I really do miss the mid range that the Revolvers gave.
These have about 1500 miles on them, and I will sell them for $400.00 Shipped.
Don't let negative posts scare you away from these, if you like a lumpy idle, and good power, these things are awesome.
PM me for pics.
These have about 1500 miles on them, and I will sell them for $400.00 Shipped.
Don't let negative posts scare you away from these, if you like a lumpy idle, and good power, these things are awesome.
PM me for pics.
#3
Newbie
Thread Starter
iTrader: (14)
Join Date: Nov 2004
Location: OKC
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Since people are lazy (Like me), I did some searching to show how good these cams are.
Here are some numbers that someone made without even fine tuning, before they were running HKS 272's.
HP 297 TQ 285 HKS
HP 313 TQ 318 Revolvers
Thats 16whp and 33torque without doing much other than throwing these in.
The main thing that you will notice when you install these is the pickup of mid range power. They are great for auto-X.
Check the stat list below and see how they compare.
Revolver Cams:
Duration / Intake: 262º
Duration / Exhaust: 264º
Valve Lift / Intake: 11.4 mm
Valve Lift / Exhaust: 11.5 mm
HKS 272:
Duration of 272 deg
Duration of 214 deg @ 1mm
Lift of 10.8mm intake / 10.2mm exhaust
Stock valve springs OK
JUN 272:
Duration of 272 deg
Duration of 235 deg @ 1mm
Lift of 10.8mm
Upgraded valve springs required
Here are some numbers that someone made without even fine tuning, before they were running HKS 272's.
HP 297 TQ 285 HKS
HP 313 TQ 318 Revolvers
Thats 16whp and 33torque without doing much other than throwing these in.
The main thing that you will notice when you install these is the pickup of mid range power. They are great for auto-X.
Check the stat list below and see how they compare.
Revolver Cams:
Duration / Intake: 262º
Duration / Exhaust: 264º
Valve Lift / Intake: 11.4 mm
Valve Lift / Exhaust: 11.5 mm
HKS 272:
Duration of 272 deg
Duration of 214 deg @ 1mm
Lift of 10.8mm intake / 10.2mm exhaust
Stock valve springs OK
JUN 272:
Duration of 272 deg
Duration of 235 deg @ 1mm
Lift of 10.8mm
Upgraded valve springs required
Thread
Thread Starter
Forum
Replies
Last Post
ultimatesteve
Evo Engine / Turbo / Drivetrain
9
Aug 11, 2008 02:58 AM