I'm just throwing this out there to see what kind of money it will sell for, if im not getting the type of offers im looking for ill just keep it.

Will come with ALL of the following:

Ball Bearing GT35R Turbocharger
BR Produced Cast Exhaust Manifold (from NI-Resist material)
TiAL 44mm External Wastegate
Stainless Steel O2 Housing
Replacement Low Profile Cooling Fan
Oil Feed Line
Oil Return Line
Misc. Fittings
Hardware
Gaskets Note: BR kit utilizes the factory water lines.

The turbo made a max of 591WHP 454 TQ @ 35psi IN THE PAST MONTH, and has only seen this power range on the dyno, after that Pump gas was readded and the car was driven @ 450whp. (Dyno graph available upon request of serious buyers.)

Ive had the turbo kit on for about id say a year and a half, and theres 10k miles on it. Only been to the track with it about 7 times max. Alot of people are willing to back up the sale saying that the turbo is not beat on, and is daily driven @ 24 PSI. Has seen a max of 35psi.

Car is my daily driver which is why there is so many miles on it.

Also yes the manifold is rusted, but i talked to Jrod@Buschur and he told me this is perfectly normal for the manifold to rust, especially since im in a state close to water, I guess the salt in the air causes it to rust somewhat? Im not sure exactly.
THE RUST IS CLEANABLE !! IT IS NOT PERMANENT

So PM ME your offers and depending on how much the offers are ill take it into greater consideration

Retail is 3000$, Im asking 2000$ right now OR BEST OFFER, but open to offers / trades.

Note: PLEASE, DO NOT LOW BALL! Not looking to give away the kit.!

Thank you


PICS:

 

PMd

 

pm'd you back

 

bmp

 

lots of interested all pms replied, bump

 

LOTS of pms but money talks. bump

 

bmp

 

bmp

 

A few questions about pieces that are included and or are needed:

(1) Does the kit include a downpipe that works for the 9? Will a standard 3" DP connect fine to the kit?

(2) Does the kit come with a BR LICP? Will the kit work with a Nisei LICP ?

(3) Do you have dyno graphs to show boost and power ? (I am curious about spool and responsiveness of the kit.)

(4) Which intake comes with the kit?

(5) Does the WG dump to atmosphere or into the exhaust?

Thanks!

 

(1) Does the kit include a downpipe that works for the 9? Will a standard 3" DP connect fine to the kit?

No buschurs kits do not include dowpipes. Yes most standard downpipes will fit (I use megan)

(2) Does the kit come with a BR LICP? Will the kit work with a Nisei LICP ?

It comes with a lower intercooler pipe extension, but I didnt even use it.. as a matter of fact I might of lost it.. I just used a Misc. lower intercooler pipe and a coupler. Most lowerintercooler pipes should work, if not couplers can be used to bridge gaping.

(3) Do you have dyno graphs to show boost and power ? (I am curious about spool and responsiveness of the kit.)

The only current dyno graph I is my oldddd pump gas graph which you can pm me for :P
If I can find the pull where I made 591WHP ill gladly send that to prospective buyers

(4) Which intake comes with the kit?

Buschurs kits dont come with intakes, any 3'' intake or bigger will fit (bigger needs a reducer)

(5) Does the WG dump to atmosphere or into the exhaust?

Atmospherically

 

Wanna sell just the turbo?

Josh

 

If you can find someone to buy all the rest of the parts sure

 

bmp

 

I posted another thread to see if I can find someone to buy the rest of it.

https://www.evolutionm.net/forums/sa...ml#post6639940

Josh

 

thanks the rest of the turbokit includes the cast iron manifold, wastegate, and slim fan