Mark this thread as Unsold
Greddy Profec B Spec II
#1
Greddy Profec B Spec II
*****************SOLD********************
Greddy Profec B Spec II
Reason for selling is because I am using the in cabin mbc now. I took this off because I was getting boost creep and thought it was the unit. I tried different mbc's and had the same problem. I now know the boost creep is because of the o2 housing wastegate merging hole being too small and I will soon port it to fix the issue. So I'm selling this to get some cash for other mods.
You get everything pictured.
Greddy Profec B Spec II
Reason for selling is because I am using the in cabin mbc now. I took this off because I was getting boost creep and thought it was the unit. I tried different mbc's and had the same problem. I now know the boost creep is because of the o2 housing wastegate merging hole being too small and I will soon port it to fix the issue. So I'm selling this to get some cash for other mods.
You get everything pictured.
Last edited by BluEVOIX; Mar 1, 2009 at 06:54 PM.
#4
Yes. You just need to have some sort of boost source go to the greddy unit so it can monitor the pressure.
I just T'd into the vacuum line from my boost guage inside the cabin area. I'll include the T fitting as well.
Other than that its everything to power up and control boost. Of course you would need to figure out where to mount it. I just valcro'd it inside the bin under the AC knobs. As for the solnoid you can mount it where every you like under the hood. I just had it mounted in place of the factory solenoid.