Mark this thread as Unsold
AlkyControl Pump $120 OBO
#1
AlkyControl Pump $120 OBO
I have 2 pumps that im sell, 1 was upgraded and is brand new and the other was installed on the car and tested but never used.
New: $80 Used: $50 PRICE LOWERED
Prices include shipping
if anyone is interested in the whole kit let me know![Thumbs Up](https://www.evolutionm.net/forums/images/smilies/smilie_thumbsup.gif)
Pump info:
Alkycontrol Methanol Injection Pump. Custom modified in-house with special valving, additional gaskets, stainless steel hardware, weather pack termination, and run-in cycling. Pump motor case is sealed to resist water from entering armature/brush assemblies.
This is the best pump on the market, pressure tests on this pump are performed using a 15 GPH nozzle using water. Dont be confused with smaller motor pumps claiming 150 PSI using a 1 GPH nozzle. Pump will generate over 250 PSI to pass our stringent tests. This is a custom piece, that requires time and materials to build. Not an of the shelf item with a sticker change. This pump design has been on many 1000+ RWHP applications using low octane pump gas.
A variable speed controller must be used with this pump. Amperage draw can exceed 13 amps at full output. Be sure your controller can handle this amperage. Any questions, please ask.
Head on pump has no issues with 100% methanol. Any mix of water/alcohol is allowed.
Will not work with Fuel, Oil, or other fluids with petroleum content.
New: $80 Used: $50 PRICE LOWERED
Prices include shipping
if anyone is interested in the whole kit let me know
![Thumbs Up](https://www.evolutionm.net/forums/images/smilies/smilie_thumbsup.gif)
Pump info:
Alkycontrol Methanol Injection Pump. Custom modified in-house with special valving, additional gaskets, stainless steel hardware, weather pack termination, and run-in cycling. Pump motor case is sealed to resist water from entering armature/brush assemblies.
This is the best pump on the market, pressure tests on this pump are performed using a 15 GPH nozzle using water. Dont be confused with smaller motor pumps claiming 150 PSI using a 1 GPH nozzle. Pump will generate over 250 PSI to pass our stringent tests. This is a custom piece, that requires time and materials to build. Not an of the shelf item with a sticker change. This pump design has been on many 1000+ RWHP applications using low octane pump gas.
A variable speed controller must be used with this pump. Amperage draw can exceed 13 amps at full output. Be sure your controller can handle this amperage. Any questions, please ask.
Head on pump has no issues with 100% methanol. Any mix of water/alcohol is allowed.
Will not work with Fuel, Oil, or other fluids with petroleum content.
Last edited by jasonrp15; Apr 15, 2009 at 01:05 PM.