Mark this thread as Unsold
Evo 9 Turbo and Perrin Test pipe
Mar 19, 2009, 06:29 PM
#1
Evo 9 Turbo and Perrin Test pipe
I'm selling my Evo IX turbocharger with the wastegate actuator and a new divided turbine discharge gasket. The turbine housing is ported and polished. The turbo has 34k miles on it and is in perfect condition. I garuantee the condition and quality of the turbocharger! I made 347awhp/365lb-ft spiking to 28psi and tapering to 19 at redline. I'm selling because I'm getting another stock appearing turbocharger. 
The turbo was protected with the stock air filter and the green HKS oiled filter...so the wheels are in MINTY condintion. The engine has never had any failures (so there were no metallic particles ran through the centersection) The engine also was run with a 50/50 mix of coolant with rust inhibitors (unlike de-ionized h20 w/water wetter) so the coolant section is also in great condition. There are NO broken studs and NO stripped threads. I'm asking 500.00
******************************
I also have a Perrin 3" test pipe with 1/2" flanges and its stainless. I took it off and replaced my downpipe and test pipe with a DCSports 1 piece unit. Looking for $100.00 These go for 200.00 new. I'll be posting pictures later tonight.
******************************
Located in Bellingham
I'll be at the dynoday this Sunday at Drift Office with the test pipe.
541 980 6022
-Eric Urness
The turbo was protected with the stock air filter and the green HKS oiled filter...so the wheels are in MINTY condintion. The engine has never had any failures (so there were no metallic particles ran through the centersection) The engine also was run with a 50/50 mix of coolant with rust inhibitors (unlike de-ionized h20 w/water wetter) so the coolant section is also in great condition. There are NO broken studs and NO stripped threads. I'm asking 500.00******************************
I also have a Perrin 3" test pipe with 1/2" flanges and its stainless. I took it off and replaced my downpipe and test pipe with a DCSports 1 piece unit. Looking for $100.00 These go for 200.00 new. I'll be posting pictures later tonight.
******************************
Located in Bellingham
I'll be at the dynoday this Sunday at Drift Office with the test pipe.
541 980 6022
-Eric Urness
Last edited by R/TErnie; Mar 19, 2009 at 06:58 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
R/TErnie
For Sale/WTB - Engine / Drivetrain / Power
11
Oct 15, 2014 10:47 AM
R/TErnie
For Sale/WTB - Engine / Drivetrain / Power
6
Jun 16, 2013 01:05 AM
R/TErnie
Member Unresolved Disputes
23
Apr 21, 2012 05:35 PM
R/TErnie
For Sale/WTB - Engine / Drivetrain / Power
38
Oct 8, 2011 11:20 AM
