Mark this thread as Unsold
FP Green w/ Tial 38mm WG -complete kit!
#1
Evolved Member
Thread Starter
iTrader: (20)
Join Date: May 2007
Location: houston
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
FP Green w/ Tial 38mm WG -complete kit!
***SOLD to: wtbEVO9 (turbokit minus injectors) ***
***INJECTORS SOLD to: raasfaas ***
CLOSE THREAD PLEASE... Thanks!!!
Complete Custom FP Green Turbo Kit $1950.00
-------includes below parts which are practically new---------
* FP Green Turbocharger (2 mths old, perfect condition) - Rebuilt by FP
* GTSpec Stainless Steel Manifold w/ custom External Wastegate pipe tig welded
to accept Tial 38mm wastegate
* TIAL 38mm wastegate (1 mth old, like new)
* Invidia O2 Housing (2 mths old)
* Precision Turbo 780cc Injectors (3 mths old)
Setup has only seen 93 octane pumpgas. Has laid down 401whp at 27psi at turbochargers.com Mustang Dyno on a safe tune. Easily capable of much more on C16 or Methanol
All parts separately would cost you WAY more than the complete setup above obviously. Parts are barely used and no shaft play on the turbo etc. I wanted to go bigger so I am already in the process of having a 35r fabbed on my evo so these parts are off the car and ready for quick sale so i can finish my project.
***INJECTORS SOLD to: raasfaas ***
CLOSE THREAD PLEASE... Thanks!!!
Complete Custom FP Green Turbo Kit $1950.00
-------includes below parts which are practically new---------
* FP Green Turbocharger (2 mths old, perfect condition) - Rebuilt by FP
* GTSpec Stainless Steel Manifold w/ custom External Wastegate pipe tig welded
to accept Tial 38mm wastegate
* TIAL 38mm wastegate (1 mth old, like new)
* Invidia O2 Housing (2 mths old)
* Precision Turbo 780cc Injectors (3 mths old)
Setup has only seen 93 octane pumpgas. Has laid down 401whp at 27psi at turbochargers.com Mustang Dyno on a safe tune. Easily capable of much more on C16 or Methanol
All parts separately would cost you WAY more than the complete setup above obviously. Parts are barely used and no shaft play on the turbo etc. I wanted to go bigger so I am already in the process of having a 35r fabbed on my evo so these parts are off the car and ready for quick sale so i can finish my project.
Last edited by TakaseEVOIXSE; Jun 24, 2009 at 01:37 PM. Reason: pending sale
#4
Evolved Member
Thread Starter
iTrader: (20)
Join Date: May 2007
Location: houston
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
thx Manny! yes, im getting PMs on offers... but people low balling me on an already LOW price. This is a barely used FPgreen w/ goodies... Its not everyday you see an external WG setup for a stock framed turbo! BUMP!!
Trending Topics
#8
Evolved Member
Thread Starter
iTrader: (20)
Join Date: May 2007
Location: houston
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Inline Racing in Houston, TX. Its basically a gtspec manifold that was modded by having additional runners tig welded on top to house a Tial 38mm external gate.
This setup was very successful in controlling boost better w the fpgreen. I dynoed 401whp w a traditional internal flapper wg actuator... never redynoed w the external gate, but for sure it makes even more whp as it cured the boost tapering issues. The sound is pretty cool too!
But I'm greedy... so Inline fabbed me a full custom mani for a gt35r... so reason why I'm selling this unique setup. I'm getting a lot of pm's.... but still for sale.
This setup was very successful in controlling boost better w the fpgreen. I dynoed 401whp w a traditional internal flapper wg actuator... never redynoed w the external gate, but for sure it makes even more whp as it cured the boost tapering issues. The sound is pretty cool too!
But I'm greedy... so Inline fabbed me a full custom mani for a gt35r... so reason why I'm selling this unique setup. I'm getting a lot of pm's.... but still for sale.