Mark this thread as Unsold
Buschur HTA37R COMPLETE Turbo Kit... Taking offers
Oct 18, 2009, 08:42 PM
#1
Evolved Member
Thread Starter
iTrader: (13)
Join Date: Jan 2006
Location: Las Vegas and HATING it
Posts: 2,916
Likes: 0
Received 1 Like
on
1 Post
Buschur HTA37R COMPLETE Turbo Kit... $3500
Hay guys I have my HTA37R Buschur Turbo kit up 4 sale and I am taking reasonable offers, the kit new is $4400 and I am looking to get $3500 FIRM I have gone a different route and need this SOLD ASAP.
This turbo made 665whp on the BR heart breaking dyno. I went 9.8 at 149mph on this turbo kit. There are no more than 6000 miles on it, with oil changes every 1k with a filter using the special Buschur Racing oil.
The kit includes:
Ball Bearing HTA37R Turbocharger.. it has a T3 .82 a/r with a 4 bolt 3in discharge
BR Produced Tubular Stainless Steel Exhaust Manifold... made by Shearer Fab!
Buschur Racing 3" S.S. downpipe (not pictured)
TiAL 44mm External Wastegate
Stainless Steel O2 Housing
Replacement Low Profile Cooling Fan
Oil Feed Line
Oil Return Line
Misc. Fittings
Hardware.
and a CBRD Radiator... cant use it anymore.
And not included in the kit from Buschur is an Aluminum 4in intake pipe with a K&N filter.
This will be EVERYTHING you need to bolt it onto your car
This is the most recent picture at this years shoot-out.
This turbo made 665whp on the BR heart breaking dyno. I went 9.8 at 149mph on this turbo kit. There are no more than 6000 miles on it, with oil changes every 1k with a filter using the special Buschur Racing oil.
The kit includes:
Ball Bearing HTA37R Turbocharger.. it has a T3 .82 a/r with a 4 bolt 3in discharge
BR Produced Tubular Stainless Steel Exhaust Manifold... made by Shearer Fab!
Buschur Racing 3" S.S. downpipe (not pictured)
TiAL 44mm External Wastegate
Stainless Steel O2 Housing
Replacement Low Profile Cooling Fan
Oil Feed Line
Oil Return Line
Misc. Fittings
Hardware.
and a CBRD Radiator... cant use it anymore.
And not included in the kit from Buschur is an Aluminum 4in intake pipe with a K&N filter.
This will be EVERYTHING you need to bolt it onto your car
This is the most recent picture at this years shoot-out.
Last edited by vwjeff; Oct 22, 2009 at 09:13 PM.
Oct 18, 2009, 10:56 PM
#7
Evolved Member
Thread Starter
iTrader: (13)
Join Date: Jan 2006
Location: Las Vegas and HATING it
Posts: 2,916
Likes: 0
Received 1 Like
on
1 Post
Oh I almost forgot, the CBRD Radiator had custom tabs welded to it at BR so the slim fan will bolt to the Rad, and it will not use the push pins. I will post up the thread tomm.
