Mark this thread as Unsold
FS: Slightly used Aquamist HFS-5
#1
FS: Slightly used Aquamist HFS-5
SOLD-THANKS FOR THE INTEREST!
Aquamist HFS-5 for sale. High end top of the line Water or Methanol injection system.
$989 new!
$525 shipped!
Used 2 months. Capable of allowing up to 40psi boost to be run on turbo Evo's with proper tuning.
HFS-5 features injector amplifier which will precisely deliver metered fluid into the engine based on injector duty cycle. The higher the injector duty cycle, the more fluid that is injected.
Included Pump items:
- Custom heavy-duty Shurflo pump with 125psi internal by-pass valves.
- 22cc surge arrestor and accumulator guarantees low pressure ripple operation.
- High speed PWM valve ensures accurate flow control against fuel duty cycle.
- Fast dynamic response time to LOAD and RPM transients (PWM mirrors IDC)
- Consistent droplet size due to high system pressure under all conditions.
- Powerful 150 Watt pump motor capable of maintaining flow beyond 2 liters per minute.
- DDS3 (bundled) ensures flow is monitored constantly for clogged jet or cut hose.
- 2x failsafe channels to perform advanced failsafe tasks such as boost cut, map switch, etc.
- Water and methanol compatible (0-100%)
- All hoses and tank fittings, fasteners, water level sensor electrical harness supplied
- Fluid jets: 0.9mm and 1.0mm and one Y-piece.
Aquamist HFS-5 for sale. High end top of the line Water or Methanol injection system.
$989 new!
$525 shipped!
Used 2 months. Capable of allowing up to 40psi boost to be run on turbo Evo's with proper tuning.
HFS-5 features injector amplifier which will precisely deliver metered fluid into the engine based on injector duty cycle. The higher the injector duty cycle, the more fluid that is injected.
Included Pump items:
- Custom heavy-duty Shurflo pump with 125psi internal by-pass valves.
- 22cc surge arrestor and accumulator guarantees low pressure ripple operation.
- High speed PWM valve ensures accurate flow control against fuel duty cycle.
- Fast dynamic response time to LOAD and RPM transients (PWM mirrors IDC)
- Consistent droplet size due to high system pressure under all conditions.
- Powerful 150 Watt pump motor capable of maintaining flow beyond 2 liters per minute.
- DDS3 (bundled) ensures flow is monitored constantly for clogged jet or cut hose.
- 2x failsafe channels to perform advanced failsafe tasks such as boost cut, map switch, etc.
- Water and methanol compatible (0-100%)
- All hoses and tank fittings, fasteners, water level sensor electrical harness supplied
- Fluid jets: 0.9mm and 1.0mm and one Y-piece.
Last edited by TTP Engineering; Nov 10, 2009 at 08:07 PM.
#4
Aquamist HFS-5 for sale. High end top of the line Water or Methanol injection system.
$989 new!
$595 shipped!
Used 2 months. Capable of allowing up to 40psi boost to be run on turbo Evo's with proper tuning.
HFS-5 features injector amplifier which will precisely deliver metered fluid into the engine based on injector duty cycle. The higher the injector duty cycle, the more fluid that is injected.
Included Pump items:
- Custom heavy-duty Shurflo pump with 125psi internal by-pass valves.
- 22cc surge arrestor and accumulator guarantees low pressure ripple operation.
- High speed PWM valve ensures accurate flow control against fuel duty cycle.
- Fast dynamic response time to LOAD and RPM transients (PWM mirrors IDC)
- Consistent droplet size due to high system pressure under all conditions.
- Powerful 150 Watt pump motor capable of maintaining flow beyond 2 liters per minute.
- DDS3 (bundled) ensures flow is monitored constantly for clogged jet or cut hose.
- 2x failsafe channels to perform advanced failsafe tasks such as boost cut, map switch, etc.
- Water and methanol compatible (0-100%)
- All hoses and tank fittings, fasteners, water level sensor electrical harness supplied
- Fluid jets: 0.9mm and 1.0mm and one Y-piece.
$989 new!
$595 shipped!
Used 2 months. Capable of allowing up to 40psi boost to be run on turbo Evo's with proper tuning.
HFS-5 features injector amplifier which will precisely deliver metered fluid into the engine based on injector duty cycle. The higher the injector duty cycle, the more fluid that is injected.
Included Pump items:
- Custom heavy-duty Shurflo pump with 125psi internal by-pass valves.
- 22cc surge arrestor and accumulator guarantees low pressure ripple operation.
- High speed PWM valve ensures accurate flow control against fuel duty cycle.
- Fast dynamic response time to LOAD and RPM transients (PWM mirrors IDC)
- Consistent droplet size due to high system pressure under all conditions.
- Powerful 150 Watt pump motor capable of maintaining flow beyond 2 liters per minute.
- DDS3 (bundled) ensures flow is monitored constantly for clogged jet or cut hose.
- 2x failsafe channels to perform advanced failsafe tasks such as boost cut, map switch, etc.
- Water and methanol compatible (0-100%)
- All hoses and tank fittings, fasteners, water level sensor electrical harness supplied
- Fluid jets: 0.9mm and 1.0mm and one Y-piece.