Mark this thread as Unsold
Oem parts 4 turbo+hotside+o2 housing install + bosch o2 sensor wb+fuel gauge adapter
Oct 28, 2009, 04:33 PM
#1
Newbie
Thread Starter
iTrader: (8)
Join Date: May 2007
Location: illinois
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Oem parts 4 turbo+hotside+o2 housing install + bosch o2 sensor wb+fuel gauge adapter
Clutch SOLD!
BOV SOLD!
NEW Stainless Steel Braided Clutch Line $60 Paid $86 shipped @ Link - Install Guide Here @ Link
This stainless steel braided line replaces the rubber factory hose between the clutch master cylinder and the hard line to the clutch release cylinder. By replacing the pliable rubber section with this braided line, clutch actuation is more direct and the engagement point is more consistent.
Excellent condition $200
This is a discontinued model, replaced by the rainbow looking titanium full gradient and the plain cover with the gradient badge. I had to look everywhere for this, and finally found another member who bought it a while back. Fizz was selling this for $295 recently new
3 NGK Iridium EVO Spark Plugs BPR7EIX NEW, just 3 though
$25
$70 shipped brand new. Save $20 bucks!
Bosch Oxygen Sensor - P/N: 3737
Bosch LSU4.2 5-wire, wide-band O2 sensor. Replacement sensor for LM-1, LM-2, LC-1, and LC-1ST.
My receipt
Delivery: FedEx Ground
Subtotal: $ 79.99
Shipping cost: $ 10.27
Total: $ 90.26
Odyssey Mini Batter PC680MJ with Metal Jacket 15 Pounds! Shave off extra 30 pounds in front end and extra 15pounds relocating to trunk $100 Paid $149 shipped @ link
OEM Parts for installing or replacing your hotside, o2 housing, turbo, gaskets, nuts, bolts, etc.$100 shipped for all
Parts include
Gaskets
Oil drain line gasket (oil pan): MN156738
Gasket, manifold to turbo MR404547
Turbo drain tube to oil pan build 09/03 and up 1226A002
Turbine housing-O2 housing gasket: MR299686
Compressor outlet gasket: MR281085
Nuts and bolts
Bolt turbo to manifold MN119783 X2
Exhaust manifold-turbine housing stud: MN119784 x2
Turbine housing-O2 housing stud: MR224441 x2
Turbine housing-O2 housing bolt: MD062961 x3
Turbine housing-02 housing nut: MD050073 x2
Oil feed line crush washer (turbo): MF660064 x2
Screenshot of price at a oem part store
The Ultimate Racing Fuel Pressure Gauge Adapter will allow you to bolt a fuel pressure gauge onto your stock fuel rail without any modifications or welding. $80, Paid $110 @ here
Stock o2 Housing, great for porting for extra airflow without worries of cracking compared to cheap ebay o2 housing $50
New ECU Patch Cable $100 great for those who does not want to splice their stock ECU wires, using this plug and play harness, you can just splice the wires you need for your electronics on the harness, eliminating any signs of modifications when going back to stock or warranty work. Paid $155 shipped @ link
Vibrant 2 Boilt 3" Exhaust Gasket $10 NEW
BOV SOLD!
NEW Stainless Steel Braided Clutch Line $60 Paid $86 shipped @ Link - Install Guide Here @ Link
This stainless steel braided line replaces the rubber factory hose between the clutch master cylinder and the hard line to the clutch release cylinder. By replacing the pliable rubber section with this braided line, clutch actuation is more direct and the engagement point is more consistent.
Excellent condition $200
This is a discontinued model, replaced by the rainbow looking titanium full gradient and the plain cover with the gradient badge. I had to look everywhere for this, and finally found another member who bought it a while back. Fizz was selling this for $295 recently new
3 NGK Iridium EVO Spark Plugs BPR7EIX NEW, just 3 though
$25
$70 shipped brand new. Save $20 bucks!
Bosch Oxygen Sensor - P/N: 3737
Bosch LSU4.2 5-wire, wide-band O2 sensor. Replacement sensor for LM-1, LM-2, LC-1, and LC-1ST.
My receipt
Delivery: FedEx Ground
Subtotal: $ 79.99
Shipping cost: $ 10.27
Total: $ 90.26
Odyssey Mini Batter PC680MJ with Metal Jacket 15 Pounds! Shave off extra 30 pounds in front end and extra 15pounds relocating to trunk $100 Paid $149 shipped @ link
OEM Parts for installing or replacing your hotside, o2 housing, turbo, gaskets, nuts, bolts, etc.$100 shipped for all
Parts include
Gaskets
Oil drain line gasket (oil pan): MN156738
Gasket, manifold to turbo MR404547
Turbo drain tube to oil pan build 09/03 and up 1226A002
Turbine housing-O2 housing gasket: MR299686
Compressor outlet gasket: MR281085
Nuts and bolts
Bolt turbo to manifold MN119783 X2
Exhaust manifold-turbine housing stud: MN119784 x2
Turbine housing-O2 housing stud: MR224441 x2
Turbine housing-O2 housing bolt: MD062961 x3
Turbine housing-02 housing nut: MD050073 x2
Oil feed line crush washer (turbo): MF660064 x2
Screenshot of price at a oem part store
The Ultimate Racing Fuel Pressure Gauge Adapter will allow you to bolt a fuel pressure gauge onto your stock fuel rail without any modifications or welding. $80, Paid $110 @ here
Stock o2 Housing, great for porting for extra airflow without worries of cracking compared to cheap ebay o2 housing $50
New ECU Patch Cable $100 great for those who does not want to splice their stock ECU wires, using this plug and play harness, you can just splice the wires you need for your electronics on the harness, eliminating any signs of modifications when going back to stock or warranty work. Paid $155 shipped @ link
Vibrant 2 Boilt 3" Exhaust Gasket $10 NEW
Last edited by poordude; Nov 24, 2009 at 04:04 PM.
