*** BOTH SOLD! ***

This electronic boost controller solenoid is used but works perfectly; I've tested it and it functions identically to the other solenoid I have installed on my Evo with a Profec B SpecII. Comes with the two necessary vacuum line fittings as seen in the pictures below.

It works on all three types of GReddy electronic boost controller - the Profec B Spec 2, e-01 multi controller, and Type S. Sells for $100 new from GReddy:

http://www.greddy.com/products/displ...SubCategory=51

And there's someone on eBay selling this solenoid in an install kit with vacuum lines, fittings, etc for $169:

http://cgi.ebay.com/ebaymotors/Gredd...Q5fAccessories

$55 shipped in the 48 states for the boost solenoid. I also have the matching GReddy wiring harness with the connector that the solenoid plugs into, but it was cut off at 8 feet long and doesn't have the connector that plugs directly into the back of the control unit (just two wires, pretty easy to make something that'll plug into the back of the control unit if you're resourceful).

I'll include the harness for $10 more if you want it ($19 new).






The matching harness ($10 extra):

 

Still available pm me if so

 

Sorry, it's sold.