Mark this thread as Unsold
FS: Autronic PnP EMS & CDI ignition
Sep 14, 2010, 09:39 AM
#1
Evolving Member
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: louisville
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
FS: Autronic PnP EMS & CDI ignition
Selling a modified Autronic PnP ecu. Modified meaning that the board was sent to Autronic to be modified so it outputs 4 ignition channels unlike the stock Evo ecu which only has 2 channels.
This ECU *must* be used with a 4 channel CDI ignition box. I happen to have my Autronic 500R CDI for sale as well. Comes with the wiring loom that connects 4 Honda (Denso) CBR coils to the CDI box.
Autronic is a system that is really easy to use and very straightforward. There are no silly correction or multiplier tables to setup such as you will find in an AEM system. You have a fuel table and an ignition table along with some realistic & useable modifiers and that is it. The ECU will ship with a map on it for 1000cc injectors or stock injectors it is your call.
Looking for $950 shipped for the PnP board and $750 shipped for the 500R/coils/harness.
This ECU *must* be used with a 4 channel CDI ignition box. I happen to have my Autronic 500R CDI for sale as well. Comes with the wiring loom that connects 4 Honda (Denso) CBR coils to the CDI box.
Autronic is a system that is really easy to use and very straightforward. There are no silly correction or multiplier tables to setup such as you will find in an AEM system. You have a fuel table and an ignition table along with some realistic & useable modifiers and that is it. The ECU will ship with a map on it for 1000cc injectors or stock injectors it is your call.
Looking for $950 shipped for the PnP board and $750 shipped for the 500R/coils/harness.
