Mark this thread as Sold
FS: Block, Wiseco Pistons, Oil Pump, Oil Pan, ARP Studs.
#1
Evolved Member
Thread Starter
iTrader: (171)
Join Date: Apr 2005
Location: Chandler, AZ
Posts: 1,216
Likes: 0
Received 0 Likes
on
0 Posts
FS: Block, Wiseco Pistons, Oil Pump, Oil Pan, ARP Studs.
1) Set of wiseco 1400HD pistons for the 2.0 motor. the pistons are 20 over and have only 1500 miles on them. My machine shop
refurbished the pistons by sandblasting the pistons, polished the pins and honed the pin bore. I will include the oil squirters
that are tweeked to clear these pistons. Wiseco part number K626M855. looking for SOLD. These go for $550 new.
http://i226.photobucket.com/albums/d...HDpistons1.jpg
http://i226.photobucket.com/albums/d...HDpistons2.jpg
2) Evolution 8 Bare block. This is a 85.5mm block bored to 0.0045" clearance to the wiseco pistons above. It will include ARP
Main bolts, which was lined bored to 60 ft-lbs. The block is at the machine shop now getting a fresh hone and get washed. The
block ran with the balance shafts eliminated, so the balance bearings are installed to block the oil holes. It will not include the oil squiters. SOLD!
http://i226.photobucket.com/albums/d...isf/block1.jpg
http://i226.photobucket.com/albums/d...isf/block2.jpg
http://i226.photobucket.com/albums/d...isf/block3.jpg
http://i226.photobucket.com/albums/d...isf/block4.jpg
http://i226.photobucket.com/albums/d...isf/block5.jpg
3) Front cover oil pump. In good condition. Comes with the balance shaft elimination stub. The oil pump has about 60k miles and
shows little signs of wear. The pump gears are in very good shape. The pictures show the oil pump apart, but will be assembled when shipped. $65
http://i226.photobucket.com/albums/d...f/oilpump1.jpg
http://i226.photobucket.com/albums/d...f/oilpump2.jpg
4) Oil pan off the same block above. In good shape and not bent. It has been completely stripped of paint and jet washed. includes a magnetic drain plug. SOLD!
http://i226.photobucket.com/albums/d...sf/oilpan1.jpg
http://i226.photobucket.com/albums/d...sf/oilpan2.jpg
http://i226.photobucket.com/albums/d...sf/oilpan3.jpg
5) Used set of ARP head studs. they have 5k miles on them. In good shape and includes all spacers and nuts. SOLD!
http://i226.photobucket.com/albums/d.../headstuds.jpg
Looking for a quick sale, so i am open to reasonable offers. Will get pictures as soon as i can. All prices include shipping through ups ground or usps priority mail. Paypal payments accepted, by the payment must be verified and shipped to a confirmed address.
refurbished the pistons by sandblasting the pistons, polished the pins and honed the pin bore. I will include the oil squirters
that are tweeked to clear these pistons. Wiseco part number K626M855. looking for SOLD. These go for $550 new.
http://i226.photobucket.com/albums/d...HDpistons1.jpg
http://i226.photobucket.com/albums/d...HDpistons2.jpg
2) Evolution 8 Bare block. This is a 85.5mm block bored to 0.0045" clearance to the wiseco pistons above. It will include ARP
Main bolts, which was lined bored to 60 ft-lbs. The block is at the machine shop now getting a fresh hone and get washed. The
block ran with the balance shafts eliminated, so the balance bearings are installed to block the oil holes. It will not include the oil squiters. SOLD!
http://i226.photobucket.com/albums/d...isf/block1.jpg
http://i226.photobucket.com/albums/d...isf/block2.jpg
http://i226.photobucket.com/albums/d...isf/block3.jpg
http://i226.photobucket.com/albums/d...isf/block4.jpg
http://i226.photobucket.com/albums/d...isf/block5.jpg
3) Front cover oil pump. In good condition. Comes with the balance shaft elimination stub. The oil pump has about 60k miles and
shows little signs of wear. The pump gears are in very good shape. The pictures show the oil pump apart, but will be assembled when shipped. $65
http://i226.photobucket.com/albums/d...f/oilpump1.jpg
http://i226.photobucket.com/albums/d...f/oilpump2.jpg
4) Oil pan off the same block above. In good shape and not bent. It has been completely stripped of paint and jet washed. includes a magnetic drain plug. SOLD!
http://i226.photobucket.com/albums/d...sf/oilpan1.jpg
http://i226.photobucket.com/albums/d...sf/oilpan2.jpg
http://i226.photobucket.com/albums/d...sf/oilpan3.jpg
5) Used set of ARP head studs. they have 5k miles on them. In good shape and includes all spacers and nuts. SOLD!
http://i226.photobucket.com/albums/d.../headstuds.jpg
Looking for a quick sale, so i am open to reasonable offers. Will get pictures as soon as i can. All prices include shipping through ups ground or usps priority mail. Paypal payments accepted, by the payment must be verified and shipped to a confirmed address.
Last edited by elhalisf; Oct 22, 2010 at 09:49 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
elhalisf
For Sale/WTB - Engine / Drivetrain / Power
9
May 26, 2013 10:28 PM
elhalisf
For Sale/WTB - Engine / Drivetrain / Power
27
Nov 1, 2011 03:50 PM
elhalisf
For Sale/WTB - Engine / Drivetrain / Power
13
Mar 12, 2009 12:02 PM
elhalisf
For Sale/WTB - Engine / Drivetrain / Power
5
Jan 7, 2008 03:47 PM
elhalisf
Evo Engine / Turbo / Drivetrain
27
Nov 22, 2007 11:24 AM