Mark this thread as Unsold
HTA3794r Forward Facing Kit, AWD Motorsports hot parts, all lines, etc...
#1
Evolving Member
Thread Starter
iTrader: (68)
Join Date: Sep 2009
Location: FL
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
HTA3794r Forward Facing Kit, AWD Motorsports hot parts, all lines, etc...
Price Drop!!!
Hey guys i finally had time to unbolt the downpipe off the test pipe and get everything together to take pictures. This kit was on my car for about 5 miles till i decided i wanted to part out the car! The AWD Motorsports header and dump tube are both jet coated which looks unreal under the hood! It comes with a Tial 44mm wastegate which i have both springs for high boost and low boost settings. The HTA3794r is an awesome turbo which was bought from Mike @ AWD Motorsports after i went through what turbo would be best for my build. This kit is capable of 900awhp or more!!! The o2 housing is a little ghetto looking because the kit was originally for a PTE turbo which only uses a 2.5in 4 both exhaust housing and the HTA3794r turbo uses a 3in 4 bolt housing so i had to order both the 4 bolt 3in flange and the v-band connection and bought 3in stainless steall bent pipe to weld them together. I also had the HTA3794r polished with all the marking removed so it looks awesome sticking out the front bumper!!! it worked great even tho it didnt look as pretty as i wanted but you dont even see it because its behind the turbo! I'm including a filter that fits between the turbo and front bumper for anyone that is going to DD this setup or drive it on the street! the downpipe bolts up to any stock location test pipe which is great so there is no modifying or cutting. All oil lines and water lines are already cut and ready to go and all fit perfectly so no need to order any fittings or lines! also including a lower i/c pipe with STM 90 degree coupler so you have every single part to bolt this kit right into your car
which most kits require a lot of modifying and custom parts! I put a lot of time and money into this kit to make it a bolt on application and have all the lines so nothing is left out!
Price: $3200 shipped
Pictures:
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-227.jpg?t=1303243949)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-228.jpg?t=1303243971)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-229.jpg?t=1303243990)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-231.jpg?t=1303244007)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-235.jpg?t=1303244032)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-237.jpg?t=1303244059)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-149.jpg?t=1303244127)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-148.jpg?t=1303244163)
Hey guys i finally had time to unbolt the downpipe off the test pipe and get everything together to take pictures. This kit was on my car for about 5 miles till i decided i wanted to part out the car! The AWD Motorsports header and dump tube are both jet coated which looks unreal under the hood! It comes with a Tial 44mm wastegate which i have both springs for high boost and low boost settings. The HTA3794r is an awesome turbo which was bought from Mike @ AWD Motorsports after i went through what turbo would be best for my build. This kit is capable of 900awhp or more!!! The o2 housing is a little ghetto looking because the kit was originally for a PTE turbo which only uses a 2.5in 4 both exhaust housing and the HTA3794r turbo uses a 3in 4 bolt housing so i had to order both the 4 bolt 3in flange and the v-band connection and bought 3in stainless steall bent pipe to weld them together. I also had the HTA3794r polished with all the marking removed so it looks awesome sticking out the front bumper!!! it worked great even tho it didnt look as pretty as i wanted but you dont even see it because its behind the turbo! I'm including a filter that fits between the turbo and front bumper for anyone that is going to DD this setup or drive it on the street! the downpipe bolts up to any stock location test pipe which is great so there is no modifying or cutting. All oil lines and water lines are already cut and ready to go and all fit perfectly so no need to order any fittings or lines! also including a lower i/c pipe with STM 90 degree coupler so you have every single part to bolt this kit right into your car
![Thumbs Up](https://www.evolutionm.net/forums/images/smilies/smilie_thumbsup.gif)
Price: $3200 shipped
Pictures:
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-227.jpg?t=1303243949)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-228.jpg?t=1303243971)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-229.jpg?t=1303243990)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-231.jpg?t=1303244007)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-235.jpg?t=1303244032)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-237.jpg?t=1303244059)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-149.jpg?t=1303244127)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-148.jpg?t=1303244163)
![](http://i964.photobucket.com/albums/ae122/evoforlife/photo-145.jpg?t=1303244193)
Last edited by evoforlife; Jun 24, 2011 at 06:59 AM.
#3
Evolving Member
Thread Starter
iTrader: (68)
Join Date: Sep 2009
Location: FL
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
Yes im parting the whole car out, im just sick of dumping countless amounts of money into this thing right now, as im getting out of school and want to start my own business so i dont need to work for my Dad!