Mark this thread as Unsold
ETS Polished UICP (Short Route/Mini-Batt) 230 Shipped
Apr 23, 2011, 09:06 PM
#1
Evolving Member
Thread Starter
iTrader: (32)
Join Date: Nov 2005
Location: San Diego, CA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
ETS Polished UICP (Short Route/Mini-Batt) 230 Shipped
STOCK BOV, MINI-BATTERY, SHORT ROUTE.
I had this cut and 3/4" of an Inch taken off to make it fit together and take the stress off the Throttle Body. I was out in Guam and was went a piece that was a Fluke I guess and could not afford the downtime to send it back in exchange for another piece so I marked it and had a welding shop cut it and reweld it to make the Fitiment Perfect. I have Pressure tested it to 50 PSI. This is out of View unless you are peering down and searching for it. With some grinding and polishing it will not be noticeable at all but there is not reason to do that.
http://www.extremeturbosystems.com/M...duct_info.html
372 Shipped from ETS
230 Shipped VIA UPS
I had this cut and 3/4" of an Inch taken off to make it fit together and take the stress off the Throttle Body. I was out in Guam and was went a piece that was a Fluke I guess and could not afford the downtime to send it back in exchange for another piece so I marked it and had a welding shop cut it and reweld it to make the Fitiment Perfect. I have Pressure tested it to 50 PSI. This is out of View unless you are peering down and searching for it. With some grinding and polishing it will not be noticeable at all but there is not reason to do that.
http://www.extremeturbosystems.com/M...duct_info.html
372 Shipped from ETS
230 Shipped VIA UPS
Last edited by demodeakin; May 4, 2011 at 12:01 PM.
