Mark this thread as Unsold
FS: (CT9A) FP Red 80mm Advance cover & More (Used)
Oct 16, 2011, 12:29 PM
#1
FS: (CT9A) FP Red 84mm Advance cover & More (Used)
Items: FP Flow Advance Cover 84mm SOLD, FP Gen 2 Evo 8 Install Kit (Partial), "FP 84mm Intake Tube SOLD"
Location: NJ, NYC ( Willing to ship at Buyers Expense)
Contact: PM, Email: jon@tristateevo.com
Payment: Cash or Paypal to Racinghart81@msn.com
Conditions: Items are all Fairly New Only used to Drive the car To get Tuned then Removed due to a Defective FP Red Turbo that I was Working on another car not my own. [U][COLOR="Red"] "FP Gen 2 Install kit Partial" Consist of the Following
- The Oil Line Kit can be used For those Running a Journal Bearing Turbo, FP Red-FP Black Variant Turbos.
- Evo IX Turbo outlet and Gasket
- SS Oil Feed Line With Rubber Guards (2pc)
- FP Inline Oil Filter
- Block off Bolt for Old Head Feed port
- Fitting Adaptor for new Oil Feed port from Oil Housing
- Banjo Bolt and (2x) Washers for Oil Feed that goes on the Turbo
- Front Evo IX Coolant hard line (Your stock Rear Evo 8 Coolant Line can still be used)
- 2x Exhaust housing Studs ( This I added my Self being that FP Stock Frame Variant Turbos Do not bring Studs as they should like the Turbos come OEM for the Exhaust housing. To bolt on to the Manifold They expect you to figure it out yourself when you try to use 4 bolts and nothing lines up)
FYI: The parts missing to make it a complete kit is the CopperWashers qty:4, Oil Drain oil Pan Gasket, Exhaust Manifold Gasket, O2 Housing Gasket. All of which can be used off your evo 8 turbo. If you're going to run a 02 dump setup please keep the Evo 8 02 Gasket as the Evo IX gasket is not Divided and will Cause an exhaust Leak.
Images:
Flow Advance Cover FP 84mm Compressor Cover.SOLD
FP Gen 2 Install kit $150 (Partial)
FP 84mm Intake With Rec. Bov Tube SOLD
Thanks for Looking
-Jon
Location: NJ, NYC ( Willing to ship at Buyers Expense)
Contact: PM, Email: jon@tristateevo.com
Payment: Cash or Paypal to Racinghart81@msn.com
Conditions: Items are all Fairly New Only used to Drive the car To get Tuned then Removed due to a Defective FP Red Turbo that I was Working on another car not my own. [U][COLOR="Red"] "FP Gen 2 Install kit Partial" Consist of the Following
- The Oil Line Kit can be used For those Running a Journal Bearing Turbo, FP Red-FP Black Variant Turbos.
- Evo IX Turbo outlet and Gasket
- SS Oil Feed Line With Rubber Guards (2pc)
- FP Inline Oil Filter
- Block off Bolt for Old Head Feed port
- Fitting Adaptor for new Oil Feed port from Oil Housing
- Banjo Bolt and (2x) Washers for Oil Feed that goes on the Turbo
- Front Evo IX Coolant hard line (Your stock Rear Evo 8 Coolant Line can still be used)
- 2x Exhaust housing Studs ( This I added my Self being that FP Stock Frame Variant Turbos Do not bring Studs as they should like the Turbos come OEM for the Exhaust housing. To bolt on to the Manifold They expect you to figure it out yourself when you try to use 4 bolts and nothing lines up)
FYI: The parts missing to make it a complete kit is the CopperWashers qty:4, Oil Drain oil Pan Gasket, Exhaust Manifold Gasket, O2 Housing Gasket. All of which can be used off your evo 8 turbo. If you're going to run a 02 dump setup please keep the Evo 8 02 Gasket as the Evo IX gasket is not Divided and will Cause an exhaust Leak.
Images:
Flow Advance Cover FP 84mm Compressor Cover.SOLD
FP Gen 2 Install kit $150 (Partial)
FP 84mm Intake With Rec. Bov Tube SOLD
Thanks for Looking
-Jon
Last edited by Ricekiller81; Oct 18, 2011 at 01:36 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ct9asilver
For Sale/WTB - Engine / Drivetrain / Power
63
May 5, 2012 08:51 AM
06MREvo
Drag Racing
481
Jan 11, 2012 12:20 PM
Mikey@Spec-Ops
Evo 'For Sale' External Engine / Power
92
Dec 12, 2011 09:47 PM
AF-Evo8
For Sale/WTB - Engine / Drivetrain / Power
525
Jan 8, 2011 09:42 PM
06MREvo
Drag Racing
502
Jan 18, 2010 09:39 PM
