Mark this thread as Unsold
FS: aftermarket and OEM
Nov 22, 2011 | 02:03 AM
#1
Thread Starter
Joined: Feb 2005
Posts: 554
Likes: 3
From: Fort Worth, TX
FS: aftermarket and OEM
I have stuff for sale that either have just been laying around or I've swapped them out for something else. All prices are shipped.
paypal is myko@tekken.cc
HPF mini battery kit with odessey P680 (metal jacket): $150
OEM 9 BOV: $85 SOLD
Greddy Type S only large spring w/ adaptor: $100 SOLD
OEM Balance shafts: $100
ARP Headstuds: $65
OEM pistons and rods 58k miles have seen only E85 in the last 2k miles if that: $150
pistons and rods for sale are on the LEFT
ACT XTSS and streetlite flywheel: $150 SOLD
clutch plate has 8mm thickness left. pressure plate and flywheel definitely have hot spots. been on the car since 2009 15K ish miles
PTE 50trim .63 A/R T3 5 bolt discharge flange: $275
ZERO shaft play. went on same time as clutch. Saw 489 hp @ 30 psi on E85. BB non water cooled.
BR filter kit for MAF: $50 SOLD
MAF: $75 SOLD
SMC meth kit with Labonte failsafe: $150 SOLD
BC 272 cams for EVO 8: $125 SOLD
Been on the car since early 2007. Made 522 hp with these recently.
GM MAF and MAFTranslator: $100
never used it. bought it used. sold as is.
QTP 3" SS "Y" and electronic controller: $215 SOLD
2005 EVO 8 5 SPD transmission 58k miles: $1000 SOLD
transmission is very smooth and never grinds, total of maybe 10 passes at the strip. maybe a season's worth of autox. Has seen ONLY OEM fluids. Will be packaged and shipped in a Shep Trans box
HPF Behemoth FMIC from 2006 measures 25"W x 12"H x 3"Thick: $300 shipped
This clears the bumper beam and requires no cutting of the under tray. I've made 522hp/424tq with this FMIC. I decided it was time to go with something bigger down the road but wanted to take advantage of the recent holiday sales.
Buschur Racing UICP w/ Tial flange: $200
I will do my best to ship out right away upon receipt of purchase, however please understand that I AM and drill sergeant and I work LONG hours MON through SUNDAY. I may not always be able to break away from work during normal business hours. However I will always be available for contact.
Michael
678-982-8982 TEXT please. Do NOT call as I am usually at work.
paypal is myko@tekken.cc
HPF mini battery kit with odessey P680 (metal jacket): $150
OEM 9 BOV: $85 SOLD
Greddy Type S only large spring w/ adaptor: $100 SOLD
OEM Balance shafts: $100
ARP Headstuds: $65
OEM pistons and rods 58k miles have seen only E85 in the last 2k miles if that: $150
pistons and rods for sale are on the LEFT
ACT XTSS and streetlite flywheel: $150 SOLD
clutch plate has 8mm thickness left. pressure plate and flywheel definitely have hot spots. been on the car since 2009 15K ish miles
PTE 50trim .63 A/R T3 5 bolt discharge flange: $275
ZERO shaft play. went on same time as clutch. Saw 489 hp @ 30 psi on E85. BB non water cooled.
BR filter kit for MAF: $50 SOLD
MAF: $75 SOLD
SMC meth kit with Labonte failsafe: $150 SOLD
BC 272 cams for EVO 8: $125 SOLD
Been on the car since early 2007. Made 522 hp with these recently.
GM MAF and MAFTranslator: $100
never used it. bought it used. sold as is.
QTP 3" SS "Y" and electronic controller: $215 SOLD
2005 EVO 8 5 SPD transmission 58k miles: $1000 SOLD
transmission is very smooth and never grinds, total of maybe 10 passes at the strip. maybe a season's worth of autox. Has seen ONLY OEM fluids. Will be packaged and shipped in a Shep Trans box
HPF Behemoth FMIC from 2006 measures 25"W x 12"H x 3"Thick: $300 shipped
This clears the bumper beam and requires no cutting of the under tray. I've made 522hp/424tq with this FMIC. I decided it was time to go with something bigger down the road but wanted to take advantage of the recent holiday sales.
Buschur Racing UICP w/ Tial flange: $200
I will do my best to ship out right away upon receipt of purchase, however please understand that I AM and drill sergeant and I work LONG hours MON through SUNDAY. I may not always be able to break away from work during normal business hours. However I will always be available for contact.
Michael
678-982-8982 TEXT please. Do NOT call as I am usually at work.
Last edited by Drill_Sergeant; Dec 19, 2011 at 05:45 PM.
Nov 22, 2011 | 11:07 AM
#4
Thread Starter
Joined: Feb 2005
Posts: 554
Likes: 3
From: Fort Worth, TX
To be honest, I think it's complete. I bought used back in 2009 just like that and never used it when I found out I could get E85 locally. But the guy I bought it from said it was complete with fail safe. I hope that helps.
