Mark this thread as Unsold
GA: Exedy Triple Metallic PUSH Style Clutch *LOTS of Pictures Including Measurments!*
#1
Evolving Member
Thread Starter
iTrader: (8)
Join Date: May 2006
Location: Atl, Georgia
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
GA: Exedy Triple Metallic PUSH Style Clutch *LOTS of Pictures Including Measurments!*
Name: Josh Chi
Email: JChi412@gmail.com
Location: Atlanta, Georgia
Willingness to ship: Yes
Up for sale is my low mileage Exedy Triple Cerametallic PUSH Style Clutch. I bought this clutch brand new from Buschur Racing. I originally bought it as a pull style then I had a TOB clip pop off on me. I then purchased the AMS/Exedy PUSH style conversion kit. This conversion kit alone retails for $1,339.95. This clutch has less than 10k miles on it. Only been launched twice. I just got the Flywheel re-surfaced for the new owner.
The benefits of having a PUSH style clutch is that you will never have problems with the TOB clip popping off. If you purchase a PULL style Exedy clutch and your TOB clip pops off, you have to pull your transmission just to fix the issue. Buy this clutch without having to worry about your TOB popping off.
What's included:
Exedy PUSH Style Pressure Plate
Top Plate
2 Floater Plates
3 Clutch Disks
Center Spline
Flywheel
Hydraulic TOB
Stainless Steel Hydraulic Lines
Starter Plate
Banjo Fitting
Banjo Bolt
This includes everything you will need to convert to a PUSH style clutch that can hold as much power as you can throw at it!
On to some pictures..
Freshly re-surfaced flywheel (first time being re-surfaced)
Notice the legs were re-surfaced as well making sure the same amount of metal that was taken off where the clutch disk touches, was also taken off at the legs.
Top disk front side
Top disk back side
Note: Top disk has some chips on the pads. I called Exedy about this and they said its nothing serious and will work perfectly fine.
Top disk thickness
Center disk front side
Center disk back side
Center disk thickness
Bottom disk front side
Bottom disk back side
Bottom disk thickness
First floater plate
Second floater plate
Top plate
Everything you will receive
When I called Exedy, they said Max clutch disk thickness is 4.00mm. Minimum disk thickness is 3.00mm.
Mine are as followed:
Top Disk: 3.93mm
Center Disk: 3.89mm
Bottom Disk: 3.75
Exedy said to put the thickest disk on the bottom and thinnest one on top which is what I did. For the feature owner, make sure you install the clutch in the same order I ship it in as I already put the clutch disks in the correct order Exedy told me to.
This Clutch kit retails for:
$2,350
The PUSH style conversion kit retails for:
$1,339.95
Total of: $3,689.95 PLUS tax & shipping!!
I'm selling this great condition Clutch kit for $2,250 SHIPPED!!
Price lowered to $1,950 SHIPPED FIRM!
I will make sure the package is nicely boxed and protected for the future owner!
I accept PayPal as payment. Add 3% for PayPal fees.
PayPal address: JChi412@gmail.com
I will ship same day or next day from receiving payment.
I accept checks as well.
I am not a scammer or here to rip someone off. I am a very honest person. Being that there is so many scammers out there I am willing to send whoever buys these parts a picture of my photo ID showing my address, full name and date of birth upon request. Buy with confidence that I'm not here to make a quick buck and have a reputation to keep.
Please feel free to comment on here or PM with any questions!
Email: JChi412@gmail.com
Location: Atlanta, Georgia
Willingness to ship: Yes
Up for sale is my low mileage Exedy Triple Cerametallic PUSH Style Clutch. I bought this clutch brand new from Buschur Racing. I originally bought it as a pull style then I had a TOB clip pop off on me. I then purchased the AMS/Exedy PUSH style conversion kit. This conversion kit alone retails for $1,339.95. This clutch has less than 10k miles on it. Only been launched twice. I just got the Flywheel re-surfaced for the new owner.
The benefits of having a PUSH style clutch is that you will never have problems with the TOB clip popping off. If you purchase a PULL style Exedy clutch and your TOB clip pops off, you have to pull your transmission just to fix the issue. Buy this clutch without having to worry about your TOB popping off.
What's included:
Exedy PUSH Style Pressure Plate
Top Plate
2 Floater Plates
3 Clutch Disks
Center Spline
Flywheel
Hydraulic TOB
Stainless Steel Hydraulic Lines
Starter Plate
Banjo Fitting
Banjo Bolt
This includes everything you will need to convert to a PUSH style clutch that can hold as much power as you can throw at it!
On to some pictures..
Freshly re-surfaced flywheel (first time being re-surfaced)
Notice the legs were re-surfaced as well making sure the same amount of metal that was taken off where the clutch disk touches, was also taken off at the legs.
Top disk front side
Top disk back side
Note: Top disk has some chips on the pads. I called Exedy about this and they said its nothing serious and will work perfectly fine.
Top disk thickness
Center disk front side
Center disk back side
Center disk thickness
Bottom disk front side
Bottom disk back side
Bottom disk thickness
First floater plate
Second floater plate
Top plate
Everything you will receive
When I called Exedy, they said Max clutch disk thickness is 4.00mm. Minimum disk thickness is 3.00mm.
Mine are as followed:
Top Disk: 3.93mm
Center Disk: 3.89mm
Bottom Disk: 3.75
Exedy said to put the thickest disk on the bottom and thinnest one on top which is what I did. For the feature owner, make sure you install the clutch in the same order I ship it in as I already put the clutch disks in the correct order Exedy told me to.
This Clutch kit retails for:
$2,350
The PUSH style conversion kit retails for:
$1,339.95
Total of: $3,689.95 PLUS tax & shipping!!
I'm selling this great condition Clutch kit for $2,250 SHIPPED!!
Price lowered to $1,950 SHIPPED FIRM!
I will make sure the package is nicely boxed and protected for the future owner!
I accept PayPal as payment. Add 3% for PayPal fees.
PayPal address: JChi412@gmail.com
I will ship same day or next day from receiving payment.
I accept checks as well.
I am not a scammer or here to rip someone off. I am a very honest person. Being that there is so many scammers out there I am willing to send whoever buys these parts a picture of my photo ID showing my address, full name and date of birth upon request. Buy with confidence that I'm not here to make a quick buck and have a reputation to keep.
Please feel free to comment on here or PM with any questions!
Last edited by WickedIXMR; Dec 19, 2011 at 11:44 PM.
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (8)
Join Date: May 2006
Location: Atl, Georgia
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
I really just need the money this month. I start a new job in January so I'll be fine then. I got a new build in the process as we speak. Look out for that thread soon. I'm not sure what clutch I'm getting next. Probably the same thing since this clutch is so street able.