Mark this thread as Sold
Exedy Twin Disc Clutch Needs Rebuild
#1
Exedy Twin Disc Clutch Needs Rebuild
Hey guys,
If you'd like the pressure plate and flywheel PM me and we can work a very fair price out.
If not, I'm going to throw it out.
Exedy Twin HD clutch. What you see is what you get. The intermediate/floater plates are shot, so they're not included. You get the Pressure plate and Flywheel.
Thanks,
Bob
If you'd like the pressure plate and flywheel PM me and we can work a very fair price out.
If not, I'm going to throw it out.
Exedy Twin HD clutch. What you see is what you get. The intermediate/floater plates are shot, so they're not included. You get the Pressure plate and Flywheel.
Thanks,
Bob
Last edited by Blue91lx; Jan 22, 2012 at 12:19 PM.
Trending Topics
#8
Evolving Member
iTrader: (1)
has this been rebuilt before? if not why was it disassembled & reassembled?
im basing this off the fact that there are two sets of wear marks on the flywheel from the spring clips on the intermediate/floater plate, one set of which is not in the recess on the flywheel & probably the reason all the springs on the floater plate are now broken off & the pressure plate is dinged up, from said spring pieces flying around in the bellhousing
see the second set of wear marks on the flywheel, the riveted metal pieces about one inch long on the floater/intermediate plate & the dinged up pressure plate? there should be one set of marks (3 sets of 2 marks, not 6 sets of 2) & it should be in the recess on the flywheel, those metal riveted pieces should be .5" longer & have a raised/spring section
also, it would be really hard to install this without the spring clip for the throw out bearing....
im basing this off the fact that there are two sets of wear marks on the flywheel from the spring clips on the intermediate/floater plate, one set of which is not in the recess on the flywheel & probably the reason all the springs on the floater plate are now broken off & the pressure plate is dinged up, from said spring pieces flying around in the bellhousing
see the second set of wear marks on the flywheel, the riveted metal pieces about one inch long on the floater/intermediate plate & the dinged up pressure plate? there should be one set of marks (3 sets of 2 marks, not 6 sets of 2) & it should be in the recess on the flywheel, those metal riveted pieces should be .5" longer & have a raised/spring section
also, it would be really hard to install this without the spring clip for the throw out bearing....