Mark this thread as Unsold
a bunch of parts. GARAGE CLEAN OUT
Dec 18, 2012, 01:13 PM
#1
a bunch of parts. GARAGE CLEAN OUT
as title states, selling a bunch of parts I have lying around in my garage, trying to make some more room. all parts are off a 2003 evo 8 and the stock parts have about 73k on them were all in working order when removed
I know the pics are bad so,
if you want more pics of items and are seriously interested. pm me for more pictures
WILL ONLY SHIP TO UNITED STATES. THANX
PARTS ARE DIRTY IN PICS, I was in a hurry. WILL BE CLEANED PRIOR TO SHIPPING
ALL PARTS ARE OBO AND WITHOUT SHIPPING
PRICED TO SELL
AFTERMARKET
-ARP standard headstuds/washers/nuts $ SOLD
(ran for 3k miles/ removed to install L19s/ will include leftover arp lube)
-forge diverter valve $ 65
-megan manifold $ SOLD
-greddy turbo timer w/ plug and play harness $ 65
-precision 1600cc injectors $ 300
(just got flow checked and cleaned by local shop before parking)
-tail bov weld flange $ 5
-stock coils with NOLOGY plug wires $ 40
-kracka crank case vent kit $ 25
-injen lower ic pipe $ SOLD
-ebay catch can $ 15
[SIZE=2[/SIZE]
STOCK PARTS
-stock 8 turbo ,with all lines, actuator everything $ 150
or
-stock turbo, 9.8 hotside $ 75
-oil drain tube $10
-turbo coolant lines $ 10
-turbo feed line 8 turbo $ 10
-wastegate actuator $ 25
-turbo j pipe $ 15
-BRAND NEW front case seals $ 15
-BRAND NEW oil pan gasket $ SOLD
-springs and retainers $ 60
-lifters $ 60
-throw out bearing $ 20
-evo 9 10.5 o2 housing $ 20
-under hood heat shield $ 25
-throttle body $ 75
-balance shafts $ 60
-front case and oil pump $ 75
-oil cooler and lines $ SOLD
(CLEAN)
-cams $ SOLD
-MAF $ 60
-fuel rail $ 25
-pistons and rods $ 100
-fuel pump with filter $ 25
-spark plug cover $ 20
-ic spary bar tank $ 20
-ic pipes $ 45
(missing some couplers)
-ac compressor $ 25
-ac compressor bracket $ 15
-ac lines $ 25
-ac condenser $ 40
-ac condenser fan $ 35
-radiator fan $ 50
-balance belt pulley $ 10
-balance belt cog gear $ 10
-timing belt idler pulley $ 15
-timing belt tensioner $ 15
-water pump $ 35
- battery tray and tie down $ SOLD
if I forgot to mention something but you see it in the picture, just pm me. thanks
I know the pics are bad so,
if you want more pics of items and are seriously interested. pm me for more pictures
WILL ONLY SHIP TO UNITED STATES. THANX
PARTS ARE DIRTY IN PICS, I was in a hurry. WILL BE CLEANED PRIOR TO SHIPPING
ALL PARTS ARE OBO AND WITHOUT SHIPPING
PRICED TO SELL
AFTERMARKET
-ARP standard headstuds/washers/nuts $ SOLD
(ran for 3k miles/ removed to install L19s/ will include leftover arp lube)
-forge diverter valve $ 65
-megan manifold $ SOLD
-greddy turbo timer w/ plug and play harness $ 65
-precision 1600cc injectors $ 300
(just got flow checked and cleaned by local shop before parking)
-tail bov weld flange $ 5
-stock coils with NOLOGY plug wires $ 40
-kracka crank case vent kit $ 25
-injen lower ic pipe $ SOLD
-ebay catch can $ 15
[SIZE=2[/SIZE]
STOCK PARTS
-stock 8 turbo ,with all lines, actuator everything $ 150
or
-stock turbo, 9.8 hotside $ 75
-oil drain tube $10
-turbo coolant lines $ 10
-turbo feed line 8 turbo $ 10
-wastegate actuator $ 25
-turbo j pipe $ 15
-BRAND NEW front case seals $ 15
-BRAND NEW oil pan gasket $ SOLD
-springs and retainers $ 60
-lifters $ 60
-throw out bearing $ 20
-evo 9 10.5 o2 housing $ 20
-under hood heat shield $ 25
-throttle body $ 75
-balance shafts $ 60
-front case and oil pump $ 75
-oil cooler and lines $ SOLD
(CLEAN)
-cams $ SOLD
-MAF $ 60
-fuel rail $ 25
-pistons and rods $ 100
-fuel pump with filter $ 25
-spark plug cover $ 20
-ic spary bar tank $ 20
-ic pipes $ 45
(missing some couplers)
-ac compressor $ 25
-ac compressor bracket $ 15
-ac lines $ 25
-ac condenser $ 40
-ac condenser fan $ 35
-radiator fan $ 50
-balance belt pulley $ 10
-balance belt cog gear $ 10
-timing belt idler pulley $ 15
-timing belt tensioner $ 15
-water pump $ 35
- battery tray and tie down $ SOLD
if I forgot to mention something but you see it in the picture, just pm me. thanks
Last edited by TheBigD; Jan 14, 2013 at 03:36 PM.
Dec 18, 2012, 04:21 PM
#4
injectors are low impedance,
and yes the megan manifold will work with stock turbo. the megan manifold had a lil crack in it on runner #1 I had an exhaust shop weld it. so its fixed. just to let you know theres a bead on it as you can see if you look closly in pics.
and yes the megan manifold will work with stock turbo. the megan manifold had a lil crack in it on runner #1 I had an exhaust shop weld it. so its fixed. just to let you know theres a bead on it as you can see if you look closly in pics.
Trending Topics
Jan 4, 2013, 01:33 AM
#12
ill take the 10.5 hot side please and kracka crank case vent kit! can you send a payment request to helmericks@msn.com? please and thank you
Last edited by gallas; Jan 4, 2013 at 01:40 AM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[Northwest]: BNIB kiggly racing HLA oil pressure regulator
TheBigD
For Sale/WTB - Engine / Drivetrain / Power
1
Feb 11, 2015 01:54 PM
TheBigD
Project Cars / Build Threads
16
May 5, 2014 09:34 PM
TheBigD
Evo Engine / Turbo / Drivetrain
5
Feb 16, 2014 10:08 PM
TheBigD
For Sale/WTB - Engine / Drivetrain / Power
3
May 15, 2013 07:42 AM
motion3131
For Sale - Cars For Sale
22
Jan 6, 2013 10:22 AM