Mark this thread as Unsold
Fs: Custom one of a kind turbo kit - top mount - twin scroll -brand new -lots of pics
Mar 23, 2013, 01:18 PM
#1
Newbie
Thread Starter
iTrader: (15)
Join Date: Nov 2010
Location: Minnesota
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Fs: Custom one of a kind turbo kit - top mount - twin scroll -brand new - Price Drop!
TURBO SET UP :
Probably the ONLY turbo kit of this kind in the WORLD, it has been custom designed and fabricated on my vehicle,
full spool at 5500 on my 2.0. Everything is literally brand new!
Just a reminder, EVERYTHING IS LITERALLY BRAND NEW, TOTAL RUN TIME OF PROBABLY 30 MINUTES!
TURBO KIT IS AC COMPATIBLE!!!
Everything Included:
-HKC Equal Length, top mount, twin scroll, turbo manifold, custom jet-hot coated for crome for looks and heat reduction
-Borg Warner Divided T4 s363 turbo - found on FULL RACE website
-Complete vibrant 3 inch intercooler aluminum piping custom bead rolled
-Custom V-band Downpipe + Vibrant 02 bung welded ( machine shop cut in half so it can be shipped )
-Vibrant 3 inch couplers
-Vibrant 3 inch t-bolts
-Welded GM IAT Bung on Uicp
-Tial Q blow off valve - chrome color.
-Tial 44mm V-Band Wastegate custom anodized purple 22lbs spring + custom dump tube
-Tial V-band clamps 2 for wastegate/dumptube
-Tial V-band clamp for bov
-Tial V-band clamp off Turbo
-ExtremePSI -4 oil feed line
-ExtremePSI -10 steel braided oil return line with flanges
-ExtremePSI Oil feed Flange
-ExtremePSI Oil Return Flange
- Vibrant brand new oil line gaskets
- Vibrant turbo to manifold gasket
- 4" bend coupler for a filter off the turbo
Price Cut:
Looking for $2,400 takes turbo kit shipped to your door!
message me on here
(paypal takes almost $100 + shipping will be several hundreds...)
OVER $4K WORTH OF PARTS / TIME / LABOR WENT IN TO MAKING THIS KIT!!
-Again YES it is A/C compatible
also pics on page 2..
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output. Comparable in size to the T04Z, PT67 & GT37R.
::Compressor:: (cold side)
- Wheel: 63mm Inducer / 88 mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" 90 degree charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Undivided / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .88 (default) Also Available in .91 divided & 1.00 divided A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
Probably the ONLY turbo kit of this kind in the WORLD, it has been custom designed and fabricated on my vehicle,
full spool at 5500 on my 2.0. Everything is literally brand new!
Just a reminder, EVERYTHING IS LITERALLY BRAND NEW, TOTAL RUN TIME OF PROBABLY 30 MINUTES!
TURBO KIT IS AC COMPATIBLE!!!
Everything Included:
-HKC Equal Length, top mount, twin scroll, turbo manifold, custom jet-hot coated for crome for looks and heat reduction
-Borg Warner Divided T4 s363 turbo - found on FULL RACE website
-Complete vibrant 3 inch intercooler aluminum piping custom bead rolled
-Custom V-band Downpipe + Vibrant 02 bung welded ( machine shop cut in half so it can be shipped )
-Vibrant 3 inch couplers
-Vibrant 3 inch t-bolts
-Welded GM IAT Bung on Uicp
-Tial Q blow off valve - chrome color.
-Tial 44mm V-Band Wastegate custom anodized purple 22lbs spring + custom dump tube
-Tial V-band clamps 2 for wastegate/dumptube
-Tial V-band clamp for bov
-Tial V-band clamp off Turbo
-ExtremePSI -4 oil feed line
-ExtremePSI -10 steel braided oil return line with flanges
-ExtremePSI Oil feed Flange
-ExtremePSI Oil Return Flange
- Vibrant brand new oil line gaskets
- Vibrant turbo to manifold gasket
- 4" bend coupler for a filter off the turbo
Price Cut:
Looking for $2,400 takes turbo kit shipped to your door!
message me on here
(paypal takes almost $100 + shipping will be several hundreds...)
OVER $4K WORTH OF PARTS / TIME / LABOR WENT IN TO MAKING THIS KIT!!
-Again YES it is A/C compatible
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output. Comparable in size to the T04Z, PT67 & GT37R.
::Compressor:: (cold side)
- Wheel: 63mm Inducer / 88 mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" 90 degree charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Undivided / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .88 (default) Also Available in .91 divided & 1.00 divided A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
Last edited by SnowtaEvo; Apr 1, 2013 at 04:10 PM.
Mar 26, 2013, 09:47 AM
#7
Newbie
Thread Starter
iTrader: (15)
Join Date: Nov 2010
Location: Minnesota
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Never ran the kit, spent 4000 on it when I baught it from asp and it has just been sitting inside while I was finishing my build, no issues as you can see in the video. Just need some money to finish my car / tune etc.. Thanks
