FS: 6466 FULL Turbo Kit, Spark Tech Pro CDI, GSC S3 Cams (EVO 8)
Mar 5, 2014, 02:18 PM
#1
Newbie
Thread Starter
iTrader: (20)
Join Date: Sep 2008
Location: MN
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
FS: 6466 Turbo Kit, Spark Tech Pro CDI, GSC S3 Cams (EVO 8)
Considering selling my evo so I am putting some of the bigger hp/specialty parts up for sale.
6466 Turbo Kit:
-Straight line specialties t3 manifold (Used for two summers, less then 2k miles)
-Precision 6466 turbo .82 a/r 3" v band (Bought this new, bolted it on the car, had some issues that made me take the car apart again and its sat since. Has some hot side surface rusting from the rain while the car was being brought to my new house)
-3" v band downpipe (works with a/c!)
-2.5" steel lower intercooler pipe
-3" steel upper intercooler pipe. WILL NOT FIT ACD CARS, it runs through the hole between frame rail and fender
-4" intake with k&n filter
-Oil lines
-Slim fan
Installed picture.
$3200 + s&h/pp for kit as listed above
$3900 +s&h/pp for kit as listed above + Turbosmart hypergate with dump tube and Turbosmart raceport both in black
$1600 for 6466 alone if I am to part the kit.
SparkTech Pro CDI
SOLD
GSC S3 Cams Evo 8
NO LONGER FOR SALE. INSTALLED IN NEW BUILT LONG BLOCK.
6466 Turbo Kit:
-Straight line specialties t3 manifold (Used for two summers, less then 2k miles)
-Precision 6466 turbo .82 a/r 3" v band (Bought this new, bolted it on the car, had some issues that made me take the car apart again and its sat since. Has some hot side surface rusting from the rain while the car was being brought to my new house)
-3" v band downpipe (works with a/c!)
-2.5" steel lower intercooler pipe
-3" steel upper intercooler pipe. WILL NOT FIT ACD CARS, it runs through the hole between frame rail and fender
-4" intake with k&n filter
-Oil lines
-Slim fan
Installed picture.
$3200 + s&h/pp for kit as listed above
$3900 +s&h/pp for kit as listed above + Turbosmart hypergate with dump tube and Turbosmart raceport both in black
$1600 for 6466 alone if I am to part the kit.
SparkTech Pro CDI
SOLD
GSC S3 Cams Evo 8
NO LONGER FOR SALE. INSTALLED IN NEW BUILT LONG BLOCK.
Last edited by devildevil; Apr 2, 2014 at 07:45 PM.
Mar 6, 2014, 05:55 PM
#7
Newbie
Thread Starter
iTrader: (20)
Join Date: Sep 2008
Location: MN
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
http://www.sparktechignitions.net/st...products_id=56
$1196 for ignition
$45 for mounting bracket
$65 for quick disconnect
$1306 total retail so save $200+ off that for one that is basically still new. I guess you could throw me an offer on it but dont feel like losing my *** a ton.
$1196 for ignition
$45 for mounting bracket
$65 for quick disconnect
$1306 total retail so save $200+ off that for one that is basically still new. I guess you could throw me an offer on it but dont feel like losing my *** a ton.
