Mark this thread as Unsold
Clutch fork postion JUST installed clutch 5 minutes ago
#1
Clutch fork postion JUST installed clutch 5 minutes ago
Alright, just completed a clutch on my '03 EVO 8. I put a stock exedy disc in with hardware etc..
Issue. I have to push the clutch all the way to the floor before I can disengage it. The pedal feel normal, the clutch system has no air in it, I never take it apart when I do clutches on these cars.
To me it looks like the clutch fork is too far to the left if you're looked down at the transmission from the top of the engine bay. I have heard of the throw out bearing coming off the fork, but the system still works. So I am unsure of what to do. I do not think the fork came off..
The only logical thing i can even think of at this time is to adjust the clutch pedal... thoughts comments would be appreciated.
Issue. I have to push the clutch all the way to the floor before I can disengage it. The pedal feel normal, the clutch system has no air in it, I never take it apart when I do clutches on these cars.
To me it looks like the clutch fork is too far to the left if you're looked down at the transmission from the top of the engine bay. I have heard of the throw out bearing coming off the fork, but the system still works. So I am unsure of what to do. I do not think the fork came off..
The only logical thing i can even think of at this time is to adjust the clutch pedal... thoughts comments would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
TommiM
Evo Engine / Turbo / Drivetrain
3
Aug 5, 2013 06:19 PM