Mark this thread as Unsold
ToxicFab baffled aluminum race catch can. Brand new, battery location
#1
FS/FT ToxicFab baffled aluminum race catch can. Brand new, battery location
I have for sale a brand new ToxicFab aluminum race catch can. I never ran it with the car, but it was test fitted to make sure there were no fitment issues and teflon thread tape was used on the AN fittings to measure for length.
This setup leaves a lot of room for any intercooler piping setup you would like to run and is great for road racing due to the internal baffling.
I have 5' of -10 hose and an additional 10" section.
Install kit is included: Two spacers, two nuts, two bolts, 4 washers.
This kit mounts where the stock battery tray bolts up to on the chassis trans mount.
Catch can is 500 new and does not include any hoses or fittings nor shipping.
My price shipped to your door is 475 with extra hose and I will eat the 3%PP fee!
Willing to trade for a spoolin up COP; ETS licp or uicp w/ait bung; mini battery kit; zeitronix ethanol content analyzer; stock location/t3 turbo blanket; gsc s2/r2/s3 cams or springs and retainers; or a Buschur Racing cat back; gm/grimmspeed 3 port
Information can be found here: http://www.toxicfab.com/store/produc...race-catch-can
This setup leaves a lot of room for any intercooler piping setup you would like to run and is great for road racing due to the internal baffling.
I have 5' of -10 hose and an additional 10" section.
Install kit is included: Two spacers, two nuts, two bolts, 4 washers.
This kit mounts where the stock battery tray bolts up to on the chassis trans mount.
Catch can is 500 new and does not include any hoses or fittings nor shipping.
My price shipped to your door is 475 with extra hose and I will eat the 3%PP fee!
Willing to trade for a spoolin up COP; ETS licp or uicp w/ait bung; mini battery kit; zeitronix ethanol content analyzer; stock location/t3 turbo blanket; gsc s2/r2/s3 cams or springs and retainers; or a Buschur Racing cat back; gm/grimmspeed 3 port
Information can be found here: http://www.toxicfab.com/store/produc...race-catch-can
Last edited by dsm nexus; Apr 4, 2014 at 04:31 PM.
#7
You asked if it was a one off can, which made me think you meant knock off or replica. I understand, yes Collin made this can specifically for the battery mount location by request as I did not want to remove any stock options at that time other than battery placement.