Mark this thread as Unsold
FS[Northeast]: Wiseco 85.5mm 9.0 CR Pistons + Wrist Pins (No Rings)
#1
Newbie
Thread Starter
iTrader: (8)
Join Date: Dec 2007
Location: Western PA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Wiseco 85.5mm 9.0 CR Pistons + Wrist Pins (No Rings)
Hey everyone,
I have a set of used Wiseco pistons from my old setup that I'd like to sell. They're Wiseco K595M855's. They have fewer than 5k miles on them - probably closer to 4k, but I would rather overstate than under. They were on a setup that made 610awhp on a reasonably conservative E85 tune and ~34-35psi. There's no damage or anything to them as far as I can tell - my machine shop (rebuilding my engine with a LR setup now) quickly cleaned them off for me and pulled the rings off of them and said that they were fine to be reused, but clearly won't work for me now. I can request more information from them, but I'm pretty certain they verified wrist pins were straight, pistons were uniform in shape/diameter, and there was no outright damage.
I'm not certain what they are worth, but I can probably get fresh rings for these from my machine shop without any issue if someone wants to exercise that option. I'm not certain what the cost would be for that, but we can explore it if someone would like.
I'm going to guess at $300 shipped OBO for the set. I think a set of rings could probably be had for ~$100 which should save someone at least $100-150 on the set versus brand new?
Please let me know if you need any additional pics/info.
Thanks!
Trevor
I have a set of used Wiseco pistons from my old setup that I'd like to sell. They're Wiseco K595M855's. They have fewer than 5k miles on them - probably closer to 4k, but I would rather overstate than under. They were on a setup that made 610awhp on a reasonably conservative E85 tune and ~34-35psi. There's no damage or anything to them as far as I can tell - my machine shop (rebuilding my engine with a LR setup now) quickly cleaned them off for me and pulled the rings off of them and said that they were fine to be reused, but clearly won't work for me now. I can request more information from them, but I'm pretty certain they verified wrist pins were straight, pistons were uniform in shape/diameter, and there was no outright damage.
I'm not certain what they are worth, but I can probably get fresh rings for these from my machine shop without any issue if someone wants to exercise that option. I'm not certain what the cost would be for that, but we can explore it if someone would like.
I'm going to guess at $300 shipped OBO for the set. I think a set of rings could probably be had for ~$100 which should save someone at least $100-150 on the set versus brand new?
Please let me know if you need any additional pics/info.
Thanks!
Trevor
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Wisco HD Pistons with upgrade wrist pins
Howulikemyevo
For Sale/WTB - Engine / Drivetrain / Power
7
Jul 22, 2016 12:38 PM
usacchamp
For Sale/WTB - Engine / Drivetrain / Power
23
Jun 10, 2014 04:26 AM
vegasse
For Sale/WTB - Engine / Drivetrain / Power
17
Jan 31, 2011 11:47 AM