good guy Scott @ TTP
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Sep 2004
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
good guy Scott @ TTP
I had the last mod taken off of my old evo today. I went back to Scott at TTP to have it done. Out went HKS and in went stock. For a professional job by a guy who loves evo's as much as you do, make sure you give him a call...
and on that note the evo is retired........
and on that note the evo is retired........
#4
Account Disabled
iTrader: (465)
Thanks again Dru. I guess I did a good job as you hired me to do the cams in and the cams out. Glad I could help.
I was pretty energized yesterday like the bunny. Set a new personal best at 65min start to finish including timing cover removal and reinstallation. Don't confuse speed with incompleteness. Just because it was fast does not mean it was careless. In fact all bolts were torqued to spec, RTV sealant used on CG bearing caps and rear VC seals. After about 45 installations of the same job it becomes second nature . The new owner of the car will have a very reliable Evo.
I was pretty energized yesterday like the bunny. Set a new personal best at 65min start to finish including timing cover removal and reinstallation. Don't confuse speed with incompleteness. Just because it was fast does not mean it was careless. In fact all bolts were torqued to spec, RTV sealant used on CG bearing caps and rear VC seals. After about 45 installations of the same job it becomes second nature . The new owner of the car will have a very reliable Evo.
#5
Newbie
Thread Starter
iTrader: (3)
Join Date: Sep 2004
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTP Engineering
Thanks again Dru. I guess I did a good job as you hired me to do the cams in and the cams out. Glad I could help.
I was pretty energized yesterday like the bunny. Set a new personal best at 65min start to finish including timing cover removal and reinstallation. Don't confuse speed with incompleteness. Just because it was fast does not mean it was careless. In fact all bolts were torqued to spec, RTV sealant used on CG bearing caps and rear VC seals. After about 45 installations of the same job it becomes second nature . The new owner of the car will have a very reliable Evo.
I was pretty energized yesterday like the bunny. Set a new personal best at 65min start to finish including timing cover removal and reinstallation. Don't confuse speed with incompleteness. Just because it was fast does not mean it was careless. In fact all bolts were torqued to spec, RTV sealant used on CG bearing caps and rear VC seals. After about 45 installations of the same job it becomes second nature . The new owner of the car will have a very reliable Evo.