Try tigeron he is good at those I am sure he has installed a set before.

 

ron doesn't do IX cams though

 

I do IX cams I did them in my car and TTP Scott assisted thats how we learned. They are alittle more inolved.

 

eeeewwwww bad news about the cams being all messed up man...... i wouldent be driving on that thing. You could be a tooth off on the on the cam gears. is there any ticking?? if you didnt bleed the lifters when you put them back in, and you hear a ticking noise, one of them could be stuck. Or one of the more common problems: you might have the cam position sensors incorrectly installed. I just hope its the cam position sensors and not the timing cuz depending on what position the engine is in, you may have some bent valves... when you started your engine did you hear a loud clank noise? did you zip tie the belt to the cam gears when you did the install. No matter what the reason is, if ron or anyone else decides to do it, they will have to take the entire thing back apart.... its the only way the cam position sensors can be removed... im leaning towards the cam position sensors. good luck man..

Hey Ron, when are we gona get to see the AMS evo and where

 

i stand corrected, sounds good!

 

i practice launching on the new clutch last night.... hella difference, thnx TTP

 

AMS Evo isn't in town yet, They got delayed about 7 hours and Eric is currently in Louisville Kentucky. We'll keep you posted on what develops.

 

What cams did you go with, and which driver are you? There's so many EVO pilots in the area it's hard remembering which screenname's is which. Anyhow, I agree with everyone in that Ron and Scott(TTP) would be good friends to talk to when troubleshooting cams on the IX's.

Looks like we're all waiting for Eric to arrive, but just remember fellas, it's looking like he's not going to be pulling in until late tonight. I'd probably want to crash after driving all the way from Illinois and working on the EVO all hours of the night. Hopefully Eric has enough energy to enteratain the Florida boys even for just a few minutes, as he's finally coming home after what seems like forever.

 

lunar its me dj with the black 9 bronze 5 zigen wheels thomas friend. ron thomas was supposed to talk to you saturday about my situation. is there any way you can help me. when i started there was no loud clank. it idled for 10 min then i started hearing the ticking which is the lifters. i got the code for cam angle sensor and misfire. i should of taken to a shop but i had friends that were supposed to help me but left me hanging so i wanted to try it and now i gotta pay for it lol. anyways if you can help me i can get the car towed to you and pay for it.

 

Oh hey DJ! I haven't seen you in forever, but I'll let Ron know you're looking for him.

p.s.
This thread is so Off-Topic...I'll make another one dedicated to the actual DSM/EVO Meet in 2008.

 

Just spoke with him at 7:40pm. He's in Knoxville TN, Real bad weather. It took him 5 hrs to go 17miles. And now it storming. He is shooting to be here at my house around 1 ish and stay the night here. He said we can set something up for dinner/evening to hang with everyone and see car proolly around 6ish for dinner.


ADMISSION TO SEE CAR WWII DRAG RACE CAR IS 20.00 A HEAD AND NO FOOD STAMPS 50.00 TO HANG OUT FOR DINNER. 300.00 TO SIT IN CAR NO PERSONAL CHECKS, CASHIERS CHECKS ACCEPTED


I will post udates when they become avaliable, he is going to call me in the morning for status on arrival times. Brandon and I are getting off work early to meet him.

 

lmao pimpin the ams evo

 

That's the only way to roll

 

Update:

Eric has made it to Florida and Ron and I will be meeting up with him soon as he gets to Jacksonville which should be in about 2 hours.

 

We have decided to hangout and have the car up at the K-Mart off 103rd and Blanding by Automotive Engineering between 6 and 8pm TONIGHT.

Don't forget to bring a camera if you want to do a photoshoot of the car and the AMS EVO model.