Camp Lejeune/Jacksonville Evos
#3241
Evolving Member
iTrader: (18)
Join Date: Aug 2006
Location: AL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
There's no point in running at the track anymore...The last time I ran with a really good 60' I run out of 4th gear way before the finish. I don't see any point in beating on the car for nothing. It's dissapointing crossing in neutral...
#3244
Evolved Member
iTrader: (79)
Help me out guys...
I need a custom radiator setup... the guys at National Speed was supposed to do it, but Im not getting any return phone calls
I did a search and found on google a shop in jacksonville called Majestic Motorsports.
Any feedback on them????
Im trying not to have to drive all the way to Ohio or Pensyl. to get the work done.
Help me out....
I need this done before an upcoming track day.
I need a custom radiator setup... the guys at National Speed was supposed to do it, but Im not getting any return phone calls
I did a search and found on google a shop in jacksonville called Majestic Motorsports.
Any feedback on them????
Im trying not to have to drive all the way to Ohio or Pensyl. to get the work done.
Help me out....
I need this done before an upcoming track day.
#3245
Evolved Member
iTrader: (26)
Join Date: Jan 2003
Location: FT. BRAGG
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
try them in fayetteville http://www.tbcworks.com/contact.html
i know he does a lot of custom stuff from intercoolers to fuel cells
i know he does a lot of custom stuff from intercoolers to fuel cells
#3247
Evolving Member
iTrader: (18)
Join Date: Aug 2006
Location: AL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Ben, I'd call it a hook up. I've been in contact with ETS since the idle issues showed their ugly face. I told Mike about it, and luckily they're hooking him up too. I really doubt they would send everyone a free $200 intake. That'd be like FP sending everyone with a FP Green a new FP Red bc it's the new version.
#3249
Evolving Member
iTrader: (18)
Join Date: Aug 2006
Location: AL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Arent you running a buschur pipe? I didn't think you were having idle issues?? It runs like a beast again with that pipe on there tho. You could feel the restriction with the stocker, but it was working. Now with this..it's perfect..and LOUD! haha
#3250
Evolved Member
iTrader: (79)
try them in fayetteville http://www.tbcworks.com/contact.html
i know he does a lot of custom stuff from intercoolers to fuel cells
i know he does a lot of custom stuff from intercoolers to fuel cells
thanks
#3251
Evolved Member
iTrader: (24)
I don't know about the other shop recommended, but so far Majestic has been really good to my brother and me. Been really straight forward and the prices aren't bad.
My Evo is actually at Majestic right now getting put back together. And my brother's TT Supra will be there within a week or so to get a built head (although I think Edge Brother's will be actually building the head).
On a side note where do all the Evo guys hang out now? I haven't really been keeping up with it lately so I'm curious.
There were a few cars out in front of Best Buy last night, but as soon as I saw that there were 4 or 5 Neon SRT4s there I completely lost interest in checking it out. One of them still managed to act like a jack *** pulling out of the parking lot while I was standing outside of Dicks.
I wonder if there are any places around here where the car guys gather and there is no BS.....and no Viper guy.
My Evo is actually at Majestic right now getting put back together. And my brother's TT Supra will be there within a week or so to get a built head (although I think Edge Brother's will be actually building the head).
On a side note where do all the Evo guys hang out now? I haven't really been keeping up with it lately so I'm curious.
There were a few cars out in front of Best Buy last night, but as soon as I saw that there were 4 or 5 Neon SRT4s there I completely lost interest in checking it out. One of them still managed to act like a jack *** pulling out of the parking lot while I was standing outside of Dicks.
I wonder if there are any places around here where the car guys gather and there is no BS.....and no Viper guy.
#3252
Newbie
iTrader: (6)
Join Date: May 2008
Location: Sparks,NV
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
finally got rid of the HKS piece of crap BOV for a Forge BOV..it is so quiet. I freaking love the thing. No part throttle surges..Its awesome.
So i might sell my JDM IX MR BOV I have here..
Have just but MR BBS Wheels on...
Things going on in the next few days:
Tein Springs
Testpipe
Downpipe
Defi Boost Gauge
AEM Wideband
MBC possibly in cab
Intercooler Piping
Possible 6 Speed Swap
Vortex Generator
Shorty Antenna
Tune
and im done for a long time....
So i might sell my JDM IX MR BOV I have here..
Have just but MR BBS Wheels on...
Things going on in the next few days:
Tein Springs
Testpipe
Downpipe
Defi Boost Gauge
AEM Wideband
MBC possibly in cab
Intercooler Piping
Possible 6 Speed Swap
Vortex Generator
Shorty Antenna
Tune
and im done for a long time....
Last edited by stock_evoIX; May 9, 2009 at 05:21 PM.
#3253
Newbie
iTrader: (1)
Join Date: Aug 2008
Location: From QueenZ Ny but stay Brandon (Tampa) Fl.
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
how is doing your tune?
what did u do with the hks? the forge that u have on now is it vented?
hey get with bob about getting those parts from that modern auto place and they give military discount!!!
what did u do with the hks? the forge that u have on now is it vented?
hey get with bob about getting those parts from that modern auto place and they give military discount!!!
finally got rid of the HKS piece of crap BOV for a Forge BOV..it is so quiet. I freaking love the thing. No part throttle surges..Its awesome.
So i might sell my JDM IX MR BOV I have here..
Have just but MR BBS Wheels on...
Things going on in the next few days:
Tein Springs
Testpipe
Downpipe
Defi Boost Gauge
AEM Wideband
MBC possibly in cab
Intercooler Piping
Possible 6 Speed Swap
Vortex Generator
Shorty Antenna
Tune
and im done for a long time....
So i might sell my JDM IX MR BOV I have here..
Have just but MR BBS Wheels on...
Things going on in the next few days:
Tein Springs
Testpipe
Downpipe
Defi Boost Gauge
AEM Wideband
MBC possibly in cab
Intercooler Piping
Possible 6 Speed Swap
Vortex Generator
Shorty Antenna
Tune
and im done for a long time....
#3254
Newbie
iTrader: (1)
Join Date: Aug 2008
Location: From QueenZ Ny but stay Brandon (Tampa) Fl.
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
hey yall i wants some 272 cams but i want some aggressive ones and i dont know if i want ones that i can use the stock internals. or i mite just get it if i can get a good package
hey yall give me yall input on some good ones! with name and how big they open
hey yall give me yall input on some good ones! with name and how big they open
#3255
Newbie
iTrader: (6)
Join Date: May 2008
Location: Sparks,NV
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
The Forge is so quiet, probably too quiet...you have to be pretty much damn near open to hear the thing hiss.. and then it really still isnt very loud..No its a recirc piece, no part throttle problems at all..Im in love lol..
Oh and i think im getting a EPM dump instead
AWD Motorsports down here in FL is doing the tune..they are pretty good.they have that8 that went 8.9's or something..guys are pretty cool too.
So im shoooting for 350 with the simple mods and Ill be alright.
Based on what they said, cams shouldnt be considered on the 9 less youre going big big boost.