Notices
Southeast Region Includes AL, FL, GA, NC, SC, TN, KY.

Camp Lejeune/Jacksonville Evos

Thread Tools
 
Search this Thread
 
Old Feb 20, 2008 | 07:55 PM
  #721  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
im so jealous....i dont understand half the crap u guys talk about lol, and i dont even have a tune lol...im glad the wife finally went back to work...now its play time
Old Feb 20, 2008 | 08:07 PM
  #722  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
and which wideband do you all recommend?
Old Feb 20, 2008 | 08:25 PM
  #723  
alicea8541's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Dec 2003
Posts: 344
Likes: 1
From: Jville, NC
Me and Nick have the AEM UEGO. Cheap and works just fine. Bob has the Innovate LC-1 I believe, go this route if you want the high dollar stuff.
Old Feb 20, 2008 | 08:31 PM
  #724  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
yea i like bob's, but then again i dont know crap about that stuff...you guys need to give me a POI on all that mad scientist stuff lol
Old Feb 20, 2008 | 08:45 PM
  #725  
MREvolution06's Avatar
Evolving Member
iTrader: (19)
 
Joined: Dec 2006
Posts: 114
Likes: 0
From: North Carolina
Oh we can!

Just want to say I had a great time hanging. It's always fun to just chill and shoot it. Hopefully next week we can try again.

I'm out to bed!
Old Feb 20, 2008 | 08:59 PM
  #726  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
yea its always a good time, need to get together more often...i have no life, barracks life sucks...

I think i am going to get the innovate xd-16 kit, havent decided yet though for sure. and nick, if you still have that manifold, ill get it off of you whenever you have time. who were you saying can port and coat those for like $100?

Last edited by ohEVO18; Feb 20, 2008 at 09:02 PM.
Old Feb 21, 2008 | 04:17 AM
  #727  
alicea8541's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Dec 2003
Posts: 344
Likes: 1
From: Jville, NC
Buschur will port and coat for $195. You can pick up a Muse for $124 shipped on ebay but it's only ported. 4wheelslide on here does a ported one for $100. Buschur and 4wheelslide have a core exchange policy, so you either send one up front or they send you one and charge more for a deposit and refund you when they receive your manifold.
Old Feb 21, 2008 | 05:50 AM
  #728  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
sweet. thanks Ben. If Nick still has his stocker and I can get it off him, I am going to send it off and have it done. Im thinking of ordering that wideband in the next week or so.
Old Feb 21, 2008 | 05:00 PM
  #729  
Psquared's Avatar
Evolving Member
iTrader: (18)
 
Joined: Aug 2006
Posts: 438
Likes: 0
From: AL
Yeah, the widebands are really user preference and the XD-16 gauge is optional. You can go with a standard gauge if you want. The XD-16 allows you to record AFR's, change the LED's colors, and other crap I don't even know. Plus it can be used as a bunch of other gauges if you wish...from Boost, oil pressure, Exhaust gas temp and so on. I pm'd a guy at YoParts. He gave me a big hook up on it. Hopefully he may do the same. I can PM him and see if he'll extend the courtesy for ya...If you are going to start playing with tunes, you'll want the wideband.
Old Feb 21, 2008 | 05:03 PM
  #730  
Psquared's Avatar
Evolving Member
iTrader: (18)
 
Joined: Aug 2006
Posts: 438
Likes: 0
From: AL
On a separate note...Ben found a little something that was causing mine to run crazy rich. My stock injector scaling and latency's were jacked. We switched them to the stock settings, and she runs smooth as butter. MUCH better than before. AFR's are smooth.

I dialed the boost back when I put the intake on. It's only hitting 22.xx psi max @ 9.8afr and 0 knock. So there's more power in there...I just didn't want to install the intake blindly and keep the boost at it's previous settings.
Old Feb 21, 2008 | 07:26 PM
  #731  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
definately, sounds awesome if you would be willing to PM him for me. I think I may go with the DB series, I dont really know anything at all, so even if i were to record something with it, I wouldnt know what the hell to do with it or how to read it haha...
Old Feb 22, 2008 | 06:12 AM
  #732  
bigric09's Avatar
Evolved Member
iTrader: (37)
 
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
Originally Posted by alicea8541
Me and Nick have the AEM UEGO. Cheap and works just fine. Bob has the Innovate LC-1 I believe, go this route if you want the high dollar stuff.
LC-1 is not that expensive... the setup i have is cheaper than the UEGO... even the setup with the XD-16 is not that expensive.

Originally Posted by Psquared
Yeah, the widebands are really user preference and the XD-16 gauge is optional. You can go with a standard gauge if you want. The XD-16 allows you to record AFR's, change the LED's colors, and other crap I don't even know. Plus it can be used as a bunch of other gauges if you wish...from Boost, oil pressure, Exhaust gas temp and so on. I pm'd a guy at YoParts. He gave me a big hook up on it. Hopefully he may do the same. I can PM him and see if he'll extend the courtesy for ya...If you are going to start playing with tunes, you'll want the wideband.
Let me know if he wont let him order thru your account.... he will let me order thru mine.
Old Feb 22, 2008 | 06:42 AM
  #733  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
yeah i got a "quote" or whatever for the XD 16 at like $309, and like $279 for the DB series...should I get something that has the features of the XD16 or UEGO? Like I said, I dont understand that stuff, but would it really be that beneficial to me when it comes to tuning etc.?
Old Feb 22, 2008 | 06:43 AM
  #734  
ohEVO18's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 820
Likes: 0
From: O-H-I-O
hey Ben, how bout that base-tune
Old Feb 22, 2008 | 07:21 AM
  #735  
alicea8541's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Dec 2003
Posts: 344
Likes: 1
From: Jville, NC
I need to pull your ROM and do some research and we will see what we can do.



All times are GMT -7. The time now is 11:06 AM.