Raleigh/Durham/Triangle Area Meet
Jul 13, 2011 | 02:55 PM
#7532
Jul 13, 2011 | 03:15 PM
#7533
Jul 14, 2011 | 05:28 AM
#7534
Hey everyone,
The Grill57 Cruise-in is on for this Saturday. The parking issue has been resolved and there should be plenty of places to park. It is suppose to be great weather as well. Come out for some great cars and great food. I plan on being there around 2:30 or so.
http://www.grill57.com/
The Grill57 Cruise-in is on for this Saturday. The parking issue has been resolved and there should be plenty of places to park. It is suppose to be great weather as well. Come out for some great cars and great food. I plan on being there around 2:30 or so.
http://www.grill57.com/
Last edited by EVOXTCY; Jul 14, 2011 at 05:31 AM.
Jul 14, 2011 | 11:58 AM
#7537
Jul 15, 2011 | 09:45 AM
#7539
I might have to pass on Grill57. I wanted to check it out but last time was a letdown and I've got to meet a friend for lunch.
Hopefully it will be better for those that go this week. Be sure to give us a report!
Hopefully it will be better for those that go this week. Be sure to give us a report!
Jul 15, 2011 | 10:06 AM
#7540
That's cool. Just an update, an agreement has been met with regards to parking. My understanding from Grill57 Management there should be plenty of room to park.
Jul 16, 2011 | 01:40 PM
#7542
Newbie
Joined: Oct 2009
Posts: 26
Likes: 0
From: Raleigh, NC
Project CF Evo X complete.
Remaining issues/tasks:
- Gotta take back to the body shop for alignment on both sides for fenders. Some residual damage from the crash is causing hood/fender to overlap on driver side. Also the pass side door is rubbing the fender when it opens. Can't take passengers until that gets fixed or it will damage the fender.
- SCALES
- WHEELS/SPRINGS (yes, I know there is gap, thank you.)
There was a lot of filing and shaving that needed to be done to get the plastic pieces from the OEM fenders to install. Such as the bracket that holds the front bumper to the fender. A lot of the holes were too small, and material had to be removed. Also the reason why the windshield washer nozzles are not installed. The holes are too small. But when I thought about it, I'd rather just cover the holes anyway. I never use them. Maybe I'll turn the washer bottle into my meth tank.
Remaining issues/tasks:
- Gotta take back to the body shop for alignment on both sides for fenders. Some residual damage from the crash is causing hood/fender to overlap on driver side. Also the pass side door is rubbing the fender when it opens. Can't take passengers until that gets fixed or it will damage the fender.
- SCALES
- WHEELS/SPRINGS (yes, I know there is gap, thank you.)
There was a lot of filing and shaving that needed to be done to get the plastic pieces from the OEM fenders to install. Such as the bracket that holds the front bumper to the fender. A lot of the holes were too small, and material had to be removed. Also the reason why the windshield washer nozzles are not installed. The holes are too small. But when I thought about it, I'd rather just cover the holes anyway. I never use them. Maybe I'll turn the washer bottle into my meth tank.
Last edited by krackmonkey; Jul 16, 2011 at 01:43 PM.
Jul 16, 2011 | 02:25 PM
#7543
Newbie
Joined: Oct 2009
Posts: 26
Likes: 0
From: Raleigh, NC
