Vortex Generator
#1
Evolved Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Montreal, QC
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
Vortex Generator
Hi everyone,
I have finally found a source for all the SG parts that we are hoping to get.
I'm currently planning to import 3+ Vortex Generator for Lancer 08+/Ralliart 09+/Evo with Sunroof.
These 3 models do not have the aluminium roof (hence, flat without "bumps")
This is the VG i will be ordering. It only comes in FRP (no CF available )
The cost of the lip is around 150$ each + 200$ shipping to my door (3 VGs) + Shipping from me to you. Since I'm in Montreal, shipping to you TO guys shouldn't be all that expensive.
I know it might cost quite a bit for a FRP VG, but that is possibly the only good looking VG for the non-Evo Lancer.
Please PM me.
I have finally found a source for all the SG parts that we are hoping to get.
I'm currently planning to import 3+ Vortex Generator for Lancer 08+/Ralliart 09+/Evo with Sunroof.
These 3 models do not have the aluminium roof (hence, flat without "bumps")
This is the VG i will be ordering. It only comes in FRP (no CF available )
The cost of the lip is around 150$ each + 200$ shipping to my door (3 VGs) + Shipping from me to you. Since I'm in Montreal, shipping to you TO guys shouldn't be all that expensive.
I know it might cost quite a bit for a FRP VG, but that is possibly the only good looking VG for the non-Evo Lancer.
Please PM me.
#2
Evolved Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Montreal, QC
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
I forgot to mention that I can order more VG and the shipping cost wouldn't change much ...
so if we can get 10 VGs across at one ... we can lower the shipping cost significantly..
so if we can get 10 VGs across at one ... we can lower the shipping cost significantly..
#5
Former Sponsor
Join Date: Jul 2007
Location: the land between lancer and evo
Posts: 2,362
Likes: 0
Received 1 Like
on
1 Post
initial_d2k, Rick Chong is on his way here to open an office next month in Toronto. All the variants will be here. Both EVO X two bumps and Normal flat versions will be here. Including one new prototype design Rick has just finished designing
#6
so all the items on his ebay store are going to b a this office he's opening?
Trending Topics
#10
Hi everyone,
I have finally found a source for all the SG parts that we are hoping to get.
I'm currently planning to import 3+ Vortex Generator for Lancer 08+/Ralliart 09+/Evo with Sunroof.
These 3 models do not have the aluminium roof (hence, flat without "bumps")
This is the VG i will be ordering. It only comes in FRP (no CF available )
The cost of the lip is around 150$ each + 200$ shipping to my door (3 VGs) + Shipping from me to you. Since I'm in Montreal, shipping to you TO guys shouldn't be all that expensive.
I know it might cost quite a bit for a FRP VG, but that is possibly the only good looking VG for the non-Evo Lancer.
Please PM me.
I have finally found a source for all the SG parts that we are hoping to get.
I'm currently planning to import 3+ Vortex Generator for Lancer 08+/Ralliart 09+/Evo with Sunroof.
These 3 models do not have the aluminium roof (hence, flat without "bumps")
This is the VG i will be ordering. It only comes in FRP (no CF available )
The cost of the lip is around 150$ each + 200$ shipping to my door (3 VGs) + Shipping from me to you. Since I'm in Montreal, shipping to you TO guys shouldn't be all that expensive.
I know it might cost quite a bit for a FRP VG, but that is possibly the only good looking VG for the non-Evo Lancer.
Please PM me.
#11
Hi everyone,
I have finally found a source for all the SG parts that we are hoping to get.
I'm currently planning to import 3+ Vortex Generator for Lancer 08+/Ralliart 09+/Evo with Sunroof.
These 3 models do not have the aluminium roof (hence, flat without "bumps")
This is the VG i will be ordering. It only comes in FRP (no CF available )
The cost of the lip is around 150$ each + 200$ shipping to my door (3 VGs) + Shipping from me to you. Since I'm in Montreal, shipping to you TO guys shouldn't be all that expensive.
I know it might cost quite a bit for a FRP VG, but that is possibly the only good looking VG for the non-Evo Lancer.
Please PM me.
I have finally found a source for all the SG parts that we are hoping to get.
I'm currently planning to import 3+ Vortex Generator for Lancer 08+/Ralliart 09+/Evo with Sunroof.
These 3 models do not have the aluminium roof (hence, flat without "bumps")
This is the VG i will be ordering. It only comes in FRP (no CF available )
The cost of the lip is around 150$ each + 200$ shipping to my door (3 VGs) + Shipping from me to you. Since I'm in Montreal, shipping to you TO guys shouldn't be all that expensive.
I know it might cost quite a bit for a FRP VG, but that is possibly the only good looking VG for the non-Evo Lancer.
Please PM me.
can rick chong or you get your hands on one of these fq400 front bumpers like the one seen in the background of this pic?
Thread
Thread Starter
Forum
Replies
Last Post
george3
Motor Sports
46
Nov 21, 2015 05:48 AM
DouggieVee
09+ Lancer Ralliart General
15
Aug 5, 2013 06:16 AM
Derek888
For Sale - Interior / Exterior / Sound / Styling
183
Aug 14, 2006 08:47 PM